Latest Contributions by LindseyStone

‎08-23-2019

I played with settings some more. In the search layer settings if I have "from Defaults" or "from Layer" I get the pushpin and two boxes around my points. If I change the setting to "from Server" I get NO pushpin and just one box. Below are screenshots of how I am receiving the different results with the different settings. I'm not getting the same results as the other day on polygon and it seems to working correctly. I have no symbolgy set on this point layer as I just want the labels displayed on the map. However, when searching I want it to place a pushpin to highlight the search.

‎08-23-2019

By value on both examples.

‎08-21-2019

Robert that did the trick on the list. But what about the double highlight box on the map? If I close the popup one of the boxes automatically goes away. It's like it is selecting the point for the popup and selecting the point again for the the entire list of search results and those two selections don't line up. The polygons are the same way where it selects it for the selected item popup and for the entire list, only the polygons line up completely and you don't see any discrepancies. Here is an example of both with the popups after I selected an item out of the list and once I clicked the X in the popup window on both the polygons and points.

‎08-21-2019

Robert, I'm implementing your v2.11 Search widget into my WAB v2.13 and I'm coming across a small issue with searching point layers (does not happen with polygons). I have specified a pin as the symbology and the search results window is cutting the pins off in the list. The white lines are cut in half and the gray lines seams to be overlapping into the white lines. Then on the map there is two result boxes over one point. I have attached an image for your reference. My live site is built using WAB2.4 and v2.4 eSearch Widget and I don't experience either one of these issues. Both the WABv2.13 and my live site I'm setting up the exact same way with the same service, I'm just getting to a newer version of WAB.

‎03-12-2019

Is there any sort of status update from ESRI on if they are are going to give the ability to traverse a polygon in Pro? I work for a city government and I traverse subdivisions, easements, parcel, deeds, etc. As mentioned by other people it seems like a waste of time to have to traverse a line and then convert it into a polygon.

‎06-20-2018

Did anyone determine if this was reported to ESRI or a known bug with 10.6 or if a fix is out there? I recently upgraded to 10.6 from 10.4 and I have a map and shapefiles that I created in 10.4 along with several buffers using the buffer wizard. Today I go into the exact same map and layers to create a new buffer with the buffer wizard and crashes every time. I like the wizard better because it seems a lot more friendly and it allows me to to do a buffer on selected features. I don't see that option in the Analysis Buffer tool.

‎06-11-2018

I believe my set up is fairly simple. I have one server running both ArcGIS Server and Portal on a SMB 2008 server. I have a second server that is running Windows 10 that has my cache in a shared folder. In the Directories of the Server Manger I have the Cache Directory pointing to this shared folder on the Windows 10 machine. The rest of the directories are all pointing to local folders. No data stores only registered folders all sitting on the local machine. As for services I have around 45 services in Server. In Portal I have 30 items that include Web Maps, Web Mapping Applications, Applications, Map Image Layer, and geoprocessioning Service. My Server is NOT federated, runs http & https and the current machine and the new machine can ping each other.

‎06-06-2018

Thanks for the info Jonathon. So when you say trick it with the host file, am I adding the current machine name and IP into the host file. Also, the blog seems real interesting but it is fairly new do you think it would work on my older 10.3.1 version.

‎06-04-2018

I'm currently running ArcGIS Server, Portal, and Web Adapter v. 10.3.1 on a Windows Server 2008 and was wanting to upgrade to v. 10.6. I asked IT to duplicate my server (ran on vmWare) for a fail over backup in case something goes wrong with the upgrade. Instead IT created a brand new server with Windows Server 2012 R2 and told me to use that one going forward. I asked if we could upgrade the Server 2008 to 2012 instead of starting completely over and they gave me a bunch of reasons/excuses that they couldn't. So I need advice on how to get my ArcGIS Server & Portal over to the new Server 2012 without having to republished all my services in Server and re-set up all maps in Portal. Can I install 10.3.1 on the new Server 2012 and backup all my Server and Portal settings from my 2008 server and restore it on the 2012 server? I'm finding a lot of documentation on v 10.6 with this but not much for v 10.3.1. I have tons of Services running in server and I really don't want to open each mxd and re-publish each service. On top of that I have several maps running in Portal. Some are web apps made and customized thru portal and some are web maps being used in Web App Builder Developer. Just the thought of having to do redo these from scratch is daunting. I'm fine manually copying over my data and mxd's and I'm wanting the file structure exactly the same, I just need to get all the customized items onto this new server. I figured once I get 10.3.1 installed and correctly setup on the 2012 Server than I can just upgrade that up to ArcGIS 10.6. Thanks for any help!

‎04-04-2018

I have 4 cache services, two street maps and two aerials, and today I'm noticing white lines on all 4 cache services that is laid out in a grid pattern. I did just re-create tiles on my street cache and finished that yesterday. However, I didn't notice the white lines when I checked service when I finished the first 5 scales a couple days ago. In addition, I haven't touched the two aerial cache in a few years. So that shouldn't have been modified in anyway. Here is a link to a live site that is running all 3 Land Use GIS Website . I'm running ArcGIS Server 10.3.1 and Portal 10.3.1.

‎02-05-2018

Robert, Have you ever seen an issue when doing a search on the eSearch it doesn't list all the features. For example it finds 5 features that match, it says Features selected: 5 but only lists out 4 features, and all 5 features are highlighted on the map. I have this happening randomly on my Parcel layer. I am using WAB 2.4 and version 2.4 or the eSearch widget. Below is a link to our live site. If you do a Parcel ID search on 6670 it comes back with 2 results, highlights both on the map in blue but only lists 1 out. Same thing if you search my Parcel/owner name by Smitty it comes back with 20 results but only lists 14 features. We did tweak the widget a little to be able to add our Deed link based on spatial reference. I was hoping you could advise in which direction I should take in troubleshooting. Land Use GIS Website

‎07-10-2017

Robert, In regards to the auto Zoom I finally saw in the individual search layers configuration in the Search widget that there is an auto zoom in the Global Settings Override. I guess I was confused or didn't realize that I needed to have this checked also even if I have it checked in the initial window of the Search widget. Secondly, I think I figured out the root of the problem with it not searching past so many digits on a numbered search. When I initially removed the layer completely and put it back in there I tested it only by putting in the search expression and not configuring anything else and it worked fine. I have now finished setting up the layer and it stopped working. I have found that when I put in an Item sorting criteria (which is by one field) it doesn't allow the results. When I remove it the results are found again. I have tried to to sort by initial one (Party Name) and by PID and both fails my search results. I have the sorting set up on other layers without issue but the rest of the layers results are combination of letters and numbers unlike this one where it is all numbers. Also, this sorting was not an option on by earlier version of the search widget which might explain why I hadn't run into this problem before. Thanks for the help Robert!

‎07-10-2017

No errors.

‎07-10-2017

Robert, I removed the layer completely and re-added it and them seemed do the trick. I however did notice another little bug. My Auto zoom to search results is not working. When I do a search the map stays at the current extent, even when there is only one result. I deleted the widget completely in the client apps folder and put a fresh copy of it back in there and reconfigured the app and it still doesn't do it.

‎07-07-2017

Robert, I didn't import or copy any configs settings from 1.2 into 2.4, I completely re-set it up just using the same parameters in WAB thru the widget config window. I even removed the expression and re-added it. Maybe i can try removing the layer completely and re-adding it.

Online Status	Offline
Date Last Visited	Monday

My Ideas

Latest Contributions by LindseyStone

Re: Enhanced Search Widget Version 2.13 - 09/25/19

Re: Enhanced Search Widget Version 2.13 - 09/25/19

Re: Enhanced Search Widget Version 2.13 - 09/25/19

Re: Enhanced Search Widget Version 2.13 - 09/25/19

Re: Traverse Polygon

Re: 10.6 Buffer Wizard crashing

Re: Migrate to a new Server

Re: Migrate to a new Server

Migrate to a new Server

White lines/grid on cahce

Re: Enhanced Search Widget Version 2.13 - 09/25/19

Re: Enhanced Search Widget Version 2.13 - 09/25/19

Re: Enhanced Search Widget Version 2.13 - 09/25/19

Re: Enhanced Search Widget Version 2.13 - 09/25/19

Re: Enhanced Search Widget Version 2.13 - 09/25/19

Basemap Gallery Duplicating maps

Re: Menu widget with folders/submenu items - Click...

Field Maps Filter Order

Custom Zoom Scales for individual queries in Query...

Re: Experience Builder Query Widget Unique list