Latest Contributions by JillHalchin

‎01-08-2024

@IsmaelChivite I'm working with Connect verion 3.16.110. When I updated an older spreadsheet, it became version 3.19. When working to update the html, I found that I have to use <div> instead of <span> for a Group. I noticed that you originally wrote your post using <div>, then updated is last year. Do I need to use <div> because of our Connect version?

‎08-29-2022

Yes, please. I was thinking about this very thing a couple of days ago. We could really use it for QAQC, navigation and filling in information that may not be available at the time the data was collected.

‎07-25-2022

Thanks, Mark. I tried a test with two tablets and, based on the offline area numbers that were automatically assigned, that appeared to be the case, but it's good to have confirmation.

‎07-14-2022

According to the documentation, there is a limit of 16 offline areas per map in Field Maps, but I expect that maps that I set up will be needed for more than 16 areas. Does the limit apply only to areas that I might create in advance for others to download? When I set up and download an offline area in the mobile app, it starts with 1, even though I know that another person has already generated and downloaded 2 areas from the same map. That experiment seems to suggest that user-created offline areas don't count toward the limit of 16. Anyone know how this works?

‎06-16-2022

Thanks, Scott, I'll split it up. That's really curious about saving edits because its been like that through many versions. In fact, I can't remember when this started. Looking at my notes, I didn't use auto apply for attributes at first because it was painfully slow. I also remarked on the need to click Apply in the attributes pane and then on Save under Edit. That appears to have been version 2.1.2. At some point, the performance of auto apply improved so I left it on since then. I'll look to see if there are other settings that might be affecting this. There have been so many changes.

‎03-16-2022

Table to Excel works, so I'll build it into the workflow. I need to keep this as simple as possible for the people who will be collecting data with Field Maps. They'll be using the Excel tables to generate paper reports. But I still find it strange that the exported feature class table and standalone table are different.

‎03-15-2022

I published a layer for Field Maps on our internal GIS portal (10.8.1) that consists of a point feature class and a related table. Some of fields in both use domains. I collected test data then downloaded the results as both a file geodatabase and as an Excel workbook. I need it in table format like Excel in order create paper output of the attributes. Looking at the tables in the exported geodatabase in Pro, I see the descriptions in the domain-controlled fields. In the Excel export, those fields also show the description in the features attribute table, but the related table has the codes. Why are they different? One works and the other doesn't? Bug? Suggestions?

‎03-07-2022

No, she didn't, but I was opening domains in Pro's Catalog Window. She might have been referring to editing domains from the Catalog Pane or the layer's design menu. I find that in 2.9.1 changes are tend to not show or don't seem to stick until after saving them. Pro is slow to refresh and often doesn't do it on its own so the save seems to help. At least the Save button isn't grayed out anymore.

‎02-25-2022

Reporting back after talking with Esri. Their rep, Maria, tested it and found that depending on the way you opened the Domains window made a difference in how it acted (or acted up). Also, she checked 2.9.1 and it worked correctly. It took a few weeks for me to get 2.9.1 installed, but so far, domains are working fine for me now.

‎02-25-2022

That's possible. For 10.8 portals, the Field Maps Web App has to be installed separately, so it's possible that it wasn't configured correctly.

‎02-25-2022

I've been testing what I learned from the other thread this morning and it's a solution for me. By the way, our portal is still 10.8 or 10.8.1, so still using the original map viewer. The trick is how you get to it: After setting up forms for a map, open the map only using the “Open in Map Viewer” button on the Overview tab of the FM web app. Can add layers, fix popups, etc. there. Close it with the big X in upper right corner and you're back to the form set up. As a bonus, I just discovered default values: in the FM web app, Content > editable layers > choose one and click the Templates tab in the middle. Click on the form below that and you can set defaults in the righthand panel.

‎02-24-2022

In case anyone is still looking for an answer, check out this thread. I sure haven't seen anything in the online documentation about that approach, but worth a try tomorrow.

‎01-07-2022

2.8.1 and a file geodatabase. I had no problems earlier this week when I started working on several domains, but today I'm not able make changes. Closed and reopened Pro, compacted the geodatabase. Will request a ticket with Esri.

‎01-07-2022

I know this idea was posted a few years ago, but it's something that I think anyone who needs to spend a lot of time and effort with attribute tables would appreciate. I would describe this a functionality like an Microsoft Access table, or an Excel table with filters. In the header, you can set a filter using either a list (for smaller tables) or a text filter. The example below is a table in an enterprise geodatabase, but it is so much easier to use in Access (viewing only).

‎01-05-2022

That looks similar, although it doesn't allow you to manually select the features, which I need to do. However, the tool is not available for me to even try because we don't have the Production Mapping license.

Online Status	Offline
Date Last Visited	‎11-07-2025 10:26 AM

My Ideas

Latest Contributions by JillHalchin

Re: Survey123 Tricks of the Trade: Quick guide to modernize HTML formatting tags in your survey

Re: View Attribute Tables in Field Maps

Re: Does the limit for off-line areas for Field Maps include user-created areas?

Does the limit for off-line areas for Field Maps include user-created areas?

Re: Having the Save button enabled when an attribute value is changed in ArcGIS Pro

Re: Export related table doesn't show domain descriptions

Export related table doesn't show domain descriptions

Re: Changing a domain code or description not saving in ArcGIS Pro 2.8

Re: Changing a domain code or description not saving in ArcGIS Pro 2.8

Re: Form on Field Maps keeps resetting

Re: Form on Field Maps keeps resetting

Re: Form on Field Maps keeps resetting

Re: Changing a domain code or description not saving in ArcGIS Pro 2.8

Re: PRO: Create quick filter options in tables, drop down check boxes, unique values

Re: Exporting Related Feature Classes

Re: Attribute table fields constantly changing app...

Re: Form on Field Maps keeps resetting

Pane Management in Pro

Re: Export related table doesn't show domain descr...

Re: Changing a domain code or description not savi...