BLOG
|
Hello @vijaybadugu , Ok, so you just don't want duplicate values in your choice list (even though they are in the local CSV file)? I guess the short answer is no - it's not coming in 3.13. I would suggest hosting the CSV as an ArcGIS CSV item as a workaround for now. The first search expression in your screenshot search('Stands_CSV','','UNIT_ID') looks incorrect - there is no point specifying a seachColumn value when there is no seachType specified. I'd also like to see a screenshot of your choices worksheet (or the whole XLSForm) in order to investigate this use case further. I don't think either of these things will impact the duplicate list values though. Brett
... View more
09-08-2021
12:29 AM
|
0
|
0
|
6584
|
POST
|
Hello @AlfredBaldenweck , No - it's not possible to do this in one question. Is sounds like you're already using the solution I would recommend (multiple questions). The main limitation is that the `media::image' column in the XLSForm does not accept variables (you can't set the svg image filename based on a previous question). Even if this was possible, your choice list would get mesy - it would need to contain all counties for all states (in your example scenario) with a choice filter set up. The scaling of the SVG in the form depends aspect ratio of the image and the device you're viewing it on. For example, a short & wide image would fit better when viewing on a desktop (or tablet in landscape orientation): compared with a phone (you'll get white space top and bottom): If you know what device(s) your survey will be used on then you can design your svg file accordingly. Otherwise I've found it's best to have a roughly square aspect ratio for you svg to work best on all devices. Hope this helps, Brett
... View more
09-06-2021
10:54 PM
|
0
|
2
|
769
|
BLOG
|
Hi @vijaybadugu , can you please provide more details? I'm not exactly sure what you're asking. If you have duplicate list values in a CSV, they will all be displayed in the choice list (and be selectable) when using the search appearance. If you use the search appearance to populate a choice list dynamically from an existing feature layer with duplicate list values, only the first of the duplicate values will be displayed (and be selectable). Perhaps you could provide your XLSForm and CSV so I could get a better understanding of what you're trying to achieve? You could email directly to me using bstokes at esri.com. Brett
... View more
09-05-2021
09:49 PM
|
0
|
0
|
6948
|
POST
|
Hi @HaroldHerrera1 , No, it's not necessary to add a token to the URL you are using within your search() expression. You will need to be signed in (to Connect and/or the field app) with an account that has access to your feature service for this to work in your survey. Please confirm you're signed in and your account has access to the feature service. Brett
... View more
08-19-2021
06:27 PM
|
0
|
2
|
2384
|
POST
|
Hmmm, I'm not sure I fully understand what you're trying to achieve here. Think of the 'image-map' appearance in Survey123 as just a different way to display a choice list, then perhaps this is possible. Try setting up your survey to pre-populate a value (select_one or select_multiple) from the pop-up of a given feature. Once you get this working as you'd like, add the SVG image and 'image-map' appearance. Then the SVG image will be displayed with the existing data values highlighted (as configured in the SVG <path> elements). Brett
... View more
08-12-2021
10:01 PM
|
0
|
0
|
908
|
POST
|
Hi @AlexanderRossel , OK, I understand your requirement now. Unfortunately, this is not currently possible. We have a beta feature that allows a similar (but different) behaviour for repeats with point geometry only. You can see your repeated points on any map in your survey. See the Early Adopter documentation for details. Brett
... View more
07-08-2021
06:56 PM
|
0
|
0
|
848
|
POST
|
Hello @WhitePlains_Planning , No, I don't believe this is possible. I think this would be better handled in the dashboad itself, since the Survey123 word cloud is just displayed based on the same data that the dashboard as access to. This has been mentioned as an idea for ArcGIS Dashboards in the past (https://community.esri.com/t5/arcgis-dashboards-ideas/word-cloud-for-operations-dashboard-for-arcgis/idi-p/936572), it may be best to get behind this idea. Brett
... View more
07-08-2021
06:49 PM
|
0
|
0
|
1159
|
POST
|
Hi @michael_vetter , Sorry, I wasn't suggesting to create a survey for each route (you said there were at least 80 routes per quad, therefore over 320 routes right?). If you meant having a survey for each quad then yes, once each route has been updated and marked as complete, your inbox expression (eg Quad = 'NE' AND status='incomplete') would exclude that record from being loaded by other field workers. I don't think a webhook could be configured to only send an email once all records have been updated. The triggers operate on a per survey (record) basis. Webhooks can trigger when a new survey is submitted or an existing survey is edited. Brett
... View more
07-08-2021
06:43 PM
|
0
|
0
|
1081
|
POST
|
Hi @Mark_Johnson , I'm unable to reproduce the behaviour you're describing here. I tested it with 10.7.1, 10.8.1 and 10.9 portals and can manually place the pin and zoom/pan etc. If you share your xlsform, I can try to troubleshoot further if you like. Regards, Brett
... View more
06-17-2021
11:04 PM
|
0
|
0
|
675
|
POST
|
Hi @michael_vetter , No, the inbox query is not dynamic and you can only set one query per survey. Your initial plan sounds like a good workaround. You could also try a username based approach where you create 4 new user accounts (one for each quad) and associate each route with a username. This would allow you to keep a single survey with inbox expression (something like Quad=${username}), and only the routes associated with that user (ie quad) would be loaded. Of course this would require the field workers to constantly switch between accounts if they are working on different quads. Hope this helps, Brett
... View more
06-17-2021
09:19 PM
|
0
|
1
|
1141
|
POST
|
Hi, I'm not sure I understand the request... Are you wanting to save the word cloud image to your ArcGIS account? Brett
... View more
06-17-2021
09:07 PM
|
0
|
1
|
1227
|
POST
|
Hi @BertKraan1, As you have observed this cannot be configured directly in Survey123. A potential workaround for Android: if this can be configured in Eos Tools Pro, perhaps you could use a Mock Location Provider workflow to apply your transformations to all apps. The links below provide more details on this workflow: https://eos-gnss.com/tcp-ip-on-android-how-to-use-multiple-esri-mobile-apps-concurrently-with-your-arrow-gnss-receiver-on-android https://doc.arcgis.com/en/survey123/faq/faqgetanswers.htm#anchor10 Brett
... View more
06-17-2021
04:30 PM
|
1
|
1
|
823
|
POST
|
Hi @AlexanderRossel , You just need to add the field name of the first geotrace into the calculation column of the second (and subsequent) geotrace questions. For example: Hope this helps, Brett
... View more
06-17-2021
04:07 PM
|
1
|
0
|
903
|
POST
|
Hi @Blake_Munshell , Since the 'bearing' appearance is not yet supported in Survey123 this post would probably be better placed in the Early Adopter forums (for beta features). Having said that, I'm not able to reproduce the behavior you mention. Although I have noticed that when retrieving a survey from the Drafts folder, the decimal value is maintained in the data but not shown on the compass user interface. I've linked this post to our compass development issue. Can you please confirm if the bearing value is actually being stored, but not shown on the compass (as I'm observing), or if indeed the bearing value is lost when submitting a survey from the Draft / Outbox folders? Thanks, Brett
... View more
06-07-2021
06:50 PM
|
0
|
0
|
750
|
POST
|
Hello @com , Your survey responses are stored in an ArcGIS layer. You can conduct this analysis (select points within your study area buffer) using ArcGIS Pro, Desktop or Online. As you mentioned, you can also conduct this analysis directly in the Survey123 website (when using the 'Open in Map Viewer' option). Just add your buffer layer, then go to the 'Analysis' tab. Here you can perform a variety of different analyses - it sounds like you may want to use 'Find Existing Locations'. Analysis results can be stored in a new layer (you specify) so you will not lose your input data. Brett
... View more
06-07-2021
06:13 PM
|
0
|
0
|
611
|
Title | Kudos | Posted |
---|---|---|
3 | 04-16-2024 04:38 PM | |
3 | 01-23-2024 06:52 PM | |
4 | 08-22-2023 04:41 PM | |
1 | 07-27-2023 04:10 AM | |
2 | 02-15-2021 01:37 PM |
Online Status |
Offline
|
Date Last Visited |
06-27-2024
04:36 AM
|