POST
|
This is definitely a bug issue and it is beginning to cause issues for my companies work flows. I have a webmap with 6 view layers that pull from a single survey123 feature service. Everything displays correctly on the webmap but on collector (ios or android) not one view layer displays. The view layers were an attempt at a work around because I discovered that a differently bug or limitation does not allow you add copied layers. I need to be able to break down a Survey123 feature service into multiple layers for my field crews who use collector. Is there any hope that this bug will be fixed soon? Thanks! Josh
... View more
07-31-2019
06:40 AM
|
0
|
0
|
409
|
POST
|
I see that now. Makes sense I guess that I wouldn’t work it is reserved. Just wish they would give a warning when you try to publish. Thanks, Josh
... View more
07-25-2019
06:27 AM
|
0
|
0
|
494
|
POST
|
Not sure if this is a known bug or a new one but there seems to be a bug with date type questions when the field name is "Date" and you want to make the field not editable in a webmap. What I am seeing is the edit check box under configure popup is defaulted to editable but is grayed out so you cannot change it. You can uncheck Display but it still shows up as editable in the webmaps popup and in collector. This does not seem to happen if i name the field name is anything other than "Date". I have attached a survey excel file that i used to test this one. So far I've only seen this with the date type question. Josh
... View more
07-25-2019
06:01 AM
|
0
|
2
|
544
|
POST
|
Phil, Here is a screen shot of what i get with Method #1. Method #2 with collector is now working. It was likely the thousands separator issue.
... View more
07-23-2019
05:38 AM
|
0
|
1
|
497
|
POST
|
Phil, I'm actually trying to do this 2 different ways to appease 2 different inspector groups. For the time being i'm concentrating on getting Method #1 up and running. Method #1 I want to be able to open the attached Right of Way survey from the attached System Patrol Survey all within Survey123 and pass over the Location_ID field to the Location field in the Right of Way survey. I am attempting to use a URL that looks like this. Both Location and Location_ID fields are integer fields. arcgis-survey123://?itemID=fe8bc0d1f738450eb2a40f8b0e07a827&field:Survey_Type=Hazard_Tree&field:Location={Location_ID} Hazard_Tree_Survey Launch_Survey Method #2 2) This is lower priority. I want to be able to open the Right of Way Survey from the Collector app and pass over a LocationID field from a separate hosted feature to the Location field in the Right of Way Survey. I have a webmap built from the Right of Way Survey feature service because some inspectors prefer Collector for navigating. They want to be able to initiate a new survey when they select a pole and have the pole number go over to the survey. I'm not sure how i would go about copying the webmap and service layer for you to see. Thanks, Josh
... View more
07-22-2019
01:41 PM
|
0
|
3
|
1625
|
POST
|
Hi James, I've had some success and some failure. Yes I am running the very latest version. I've been able to pass a fixed integer value from one survey to a second survey but when I try my ultimate end game of passing the field value it gives me the old not a valid integer error. The last part of my url is something like &Field:Location_ID={Location}. Both fields are integer type questions. I've not messed with the bind type yet. Both fields would normally get a number of 8-9 characters. I've not been able to find any discussions yet about survey to survey but in my ignorance I was hoping it works the same as collector to survey. Thanks, Josh
... View more
07-13-2019
04:12 PM
|
0
|
5
|
1625
|
POST
|
Hi, Does anyone know if it is possible to reset or re-ask a question automatically when you go to edit through inbox. What i'm trying to do is create a way that a manager could edit fields in a previously sent survey that would normally be read only to a user. I have tried using the following function in the read only column ${username}!='manager_username' however it seems that when the survey is initially sent that the username field gets populated by the original user but does not reset for the editor. Is there anyway around this issue to achieve what i've trying to do? Thanks, Josh
... View more
07-08-2019
10:17 AM
|
0
|
1
|
357
|
POST
|
Derek, I was able to get the url link to work for iOS but I have had no luck with windows or android. Is there reason why it might not work for windows and android? I’m running the most current release versions of both apps. Josh
... View more
07-01-2019
10:16 AM
|
0
|
1
|
609
|
POST
|
Hello, I am having a very similar if not the same problem. I am trying to pass an integer value over to an integer question in survey123. A number that can be 8 or 9 characters in length. What happens is that when the url is used the last character is dropped and thousandth separator commas get added. Survey123 does seem to be able to handle this. I get an Invalid Integer Value message when i attempt to submit. I have tried the offered solution above of making sure the add thousand separator checked off in the pop for the webmap but that has not fixed the problem. Josh
... View more
07-01-2019
07:33 AM
|
0
|
7
|
1625
|
POST
|
I have Survey123 form that i want to use in Collector App. Some of my field crews prefer the Collector App and some the Survey123 app. I've created a webmap with the hosted feature service from the form. However when i try to use in Collector App i've noticed that i've lost some of the functionality that i would have thought would have translated over to Collector. The collector form does NOT carry over the required fields or any of the default answers that i set up. Beyond that it seems to work. Is this normal functionality for Collector or is there a better way to do this? Josh
... View more
06-30-2019
12:45 PM
|
0
|
3
|
1248
|
POST
|
Hello, We are in the planning stages of rolling out Survey123 as a damage assessment tool. A question was brought forward by someone on the project about the use of Favorite Answers and whether you could limit is usage. Does anyone know if it is even possible to limit what you can save and paste as a Favorite Answer. The fear is that users might create a favorite with the whole form completed and forget to change the answers that will be unique to a location such as location code. Has anyone addressed this issue before? Thanks, Josh
... View more
06-21-2019
06:08 AM
|
0
|
1
|
343
|
POST
|
Update - I had everyone close their viewers and that fixed the one layer but nixed a different layer that I had not made any changes to. I have now reverted my original changes and everything seems to be working okay. With that done is there anyway to fix the domains value typos without messing up the works? Thanks, Josh Sent from my iPad
... View more
04-19-2019
05:12 PM
|
0
|
1
|
523
|
POST
|
I can there are multiple users that may have this map open but I’ll see if I can get everyone to close out their app. Josh Sent from my iPad
... View more
04-18-2019
02:41 PM
|
0
|
3
|
523
|
POST
|
Hello, I've run into a problem after updating 2 coded domain values in agol. I did my edits through the hosted feature layer. The edits were simple at least i thought. Simply fixing 2 spelling errors. However once I saved my changes and went to look in collector the layer affected no longer works. The layer has a red triangle warning tag in the collector layer list and it no longer shows up in the feature templates when you try to collect a new point. I've refreshed the collector map several times but it still does not work. The layer seems to work fine in the agol webmap so i'm a bit confused. Have i done something wrong? Should i have edited the domain values a different way? And is there an easy way to fix this without having to rebuild everything. I've backed up the data. Any help would be greatly appreciated! Thanks, Josh
... View more
04-17-2019
02:00 PM
|
0
|
5
|
790
|
Title | Kudos | Posted |
---|---|---|
1 | 04-24-2024 05:28 AM | |
12 | 11-06-2022 04:59 AM | |
1 | 08-16-2019 07:57 AM | |
1 | 03-21-2018 09:38 AM | |
23 | 09-18-2019 08:11 AM |
Online Status |
Offline
|
Date Last Visited |
Wednesday
|