|
POST
|
Sporadically and suddenly it becomes impossible to select features in Collector, thus also preventing being able to edit them. We're using iPads and even after ensuring everything was updated it still happens. This is so frustrating and really messes with our field work, especially because we have no idea when it will happen or why. Is this a known bug or something on my end?
... View more
06-22-2021
10:57 AM
|
1
|
6
|
2204
|
|
POST
|
Yes, ArcGIS Indoors is something we are very interested in moving towards, though we have yet to implement ArcGIS Enterprise (hopefully happening this year). We do at least have the educational site license and we are not in a hurry to get this done, just really feeling out if it's even possible. I was aware you could track the location of mobile devices with Indoors, but I wasn't sure if it was possible to connect other types of devices (such as what I would put on an object, like a piece of science equipment, that needs to be tracked). I'm also not sure if a tracking device like what I would need--small, long battery life, ability to connect to ArcGIS instead of using another software, uses already existing infrastructure life Wifi (w/o the need to add a bunch of sensors throughout our buildings), etc.-- even exists. Does that make sense? Shew it's hard to put my mess of thoughts in a coherent sentence sometimes.
... View more
02-06-2020
08:46 AM
|
0
|
1
|
1407
|
|
POST
|
Hello! I'm trying to brainstorm some possible ways to track assets in GIS. I understand it's possible to use a GeoEvent Server with GPS trackers to track things like vehicles and whatnot. However, what I'm looking for is a way to track much smaller assets without the use of GPS, as many assets will be indoors. We are in the process of mapping out all our building floor plans. Can trackers using Wifi somehow be used here instead of GPS? Of course a limiting factor here would be that the trackers/sensors need to be small and have a long battery life. Anyone have any ideas or input on how this might be done, if at all? I do realize there are other companies and software/hardware that specialize in this, buuuut in the interest of cost and whatnot it would be great to use something we already have (that something being ArcGIS and Wifi).
... View more
02-06-2020
07:41 AM
|
0
|
3
|
1580
|
|
POST
|
I have one feature layer to display in an embedded WebApp, but it will not display in Chrome. Works fine in Safari, but for some reason will not display in Chrome. I have also tried embedding just the web map and it is the same. This is the webpage with the embedded WebApp: https://www.berea.edu/facilities-management/grounds/ This is the link to the WebApp: ArcGIS Web Application I have tried deleting the cookies in my Chrome browser, but it still won't show the feature layer. I have ensured all the layers are shared publicly. What could be happening?
... View more
11-26-2019
07:10 AM
|
0
|
1
|
1327
|
|
POST
|
The feature service and base map are both in NAD 83 Kentucky State Plane South. The basemap is an AGOL hosted tile layer. They are both using the same coordinate system when I check them in ArcMap and when I peek into each of their services directory pages on AGOL. When I am using the Default location provider and the accuracy of my GNSS receiver is its best (7cm), it seems off by about ~2ft on the map from where the receiver actually is. I use an NTRIP correction service through the KY CORS network for my receiver.
... View more
07-25-2019
11:35 AM
|
0
|
1
|
1136
|
|
POST
|
I recently changed the basemap on most of my maps to use my own imagery. This basemap uses NAD83 Kentucky State Plane South. My GNSS receiver uses NAD 1983 2011. I put that information into my new location profile, says there is no need for transformation. Great. But then when I go to open my map, it says the location profile does not match the coordinate system of the map. Why would this be? I thought all maps in AGOL took on the coordinate system of the basemap. It I choose the Default location profile, my maps open no problem, but that assumes my GNSS coordinate system is WGS 1984, which it isn't (or shouldn't be...). Anyone have any insight into what to do here?
... View more
07-25-2019
09:23 AM
|
0
|
3
|
1217
|
|
POST
|
We got it working smoothly. I believe ports 80 and 443 were correct. And our IT department handled the security so that only members of our organization can open the links using their organization credentials.
... View more
06-12-2019
01:12 PM
|
0
|
1
|
4024
|
|
POST
|
oh bless... myself and several others poured over this so many times and never caught it. THANK YOU!
... View more
04-02-2019
02:23 PM
|
1
|
0
|
3652
|
|
POST
|
I'm trying to publish a survey from a feature service (specifically to a related table in that feature service), but I keep getting this error: Except every single one of the fields in the survey is in the table. I've combed through it multiple times and can't find anything different between the two. I've posted other surveys in a similar manner before and never encountered this problem. The only thing that I see when looking at the Schema Preview is that there is a geopoint field that is not in my table. Could this be the issue? If so, what to do about it? If not, what else could it be?
... View more
04-02-2019
08:38 AM
|
0
|
5
|
4297
|
|
POST
|
Yes it's strange that it did not work. I ended up abandoning that survey and making a new one and publishing it from the default template first, then I actually created the survey how I wanted it and republished it and it worked. No idea what was on the go!
... View more
03-28-2019
05:29 AM
|
0
|
0
|
1888
|
|
POST
|
Whenever I try to publish my survey I get this error. I've tried all the things, including deleting any folders on AGOL from previous attempts, deleting .iteminfo file in folder, restarting Survey123 Connect, deleting the survey and starting over. I combed through everything to make sure I wasn't using any reserved keywords and that everything made sense. What else can I do?
... View more
03-26-2019
03:08 PM
|
0
|
3
|
2320
|
|
POST
|
Okay let me outline my goal, what I've done, and what isn't working. Goal: I have a Buildings hosted feature layer. This includes a polygon buildings feature and several related tables that are linked based off a Building_ID field. I also have a survey about housekeeping for the buildings. There is a question for the user to select which building they are answering the survey about, based on the same Building_ID. I want to be able to select a building in the map, select Related Data from the pop-up and be able to view the survey data for that building (and that building only). What I've Done: I followed this post Working with existing Feature Services in Survey123 for ArcGIS to publish a survey on top of a feature service. So I created a point feature class to the same FGDB and map as the Building feature class in ArcMap (we'll call this layer Survey). I created all the fields and domains, etc. that I want to be in the survey. I ensured all layers had a GlobalID and that Survey had a GUID. I created a 1-M relationship class between Buildings and Survey, based on the GlobalID and GUID. Published all this to AGOL. In Survey123 Connect, I created a new survey from a Feature Service, choosing the Buildings feature service. the survey works just fine and the data is appropriately added to the Survey feature layer. Question: The Survey layer data is not actually linked to a building. I want the survey data to be linked to each individual building in the Building layer, preferably based off the Building_ID field (as mentioned). Can I do this? If so, how? I have very little experience the GlobalIDs and GUIDs, they don't really make much sense to me, and I can't seem to find a good resource that explains them and how I can make them work in relating data, so if you have something that might be of help, that'd be great too.
... View more
03-12-2019
08:13 AM
|
0
|
1
|
960
|
|
POST
|
I just published a survey from Connect and when I tried to open it in my web browser this is what I get. Everything seemed to be working fine in Connect, so I don't know why this would happen. Anybody know? Attached is my xls form. Edited to add that the survey works just fine when accessed from the app. It just doesn't work in the web browser.
... View more
03-06-2019
02:46 PM
|
0
|
19
|
10411
|
|
POST
|
Okay, so I'd like to use "Quick Import" in Data Interoperability toolset. However, when I try to open it a little red "X" shows up next to the tool (see picture). When I looked into my licensing, I see that I have the toolset authorized, but not installed (pictured). Now how in the world do I get it installed? I tried updating my installation via setup.exe, but I could find anything that related to this particular toolset to change.
... View more
11-29-2018
01:32 PM
|
0
|
1
|
1331
|
| Title | Kudos | Posted |
|---|---|---|
| 1 | 05-04-2022 07:01 AM | |
| 1 | 02-18-2022 05:41 AM | |
| 1 | 08-23-2022 11:30 AM | |
| 1 | 07-01-2022 11:20 AM | |
| 1 | 03-24-2022 06:27 AM |
| Online Status |
Offline
|
| Date Last Visited |
11-30-2023
11:43 AM
|