POST
|
Hi @AnthonyJonesRSK ! I have been having the same issue while developing a landing website for one municipality with multiple pages using screen groups. We tried to implement the button-navigation to different topics within the screen groups and one of the ESRI employees then told me that it's not possible to add a link between a button and a content inside the screen group. So basically it only allows to add links to the blocks. So if you put a block just before each screen group (and set it to 0 pixels width, it will have a small gap on the page), you will be able to link to that block and show the screen group in question... So with views it is the same, if the view is in a block or in a section outside the screen group, no problem! if it is inside any screen group, you have a problem of linking to it... Hopefully ESRI will soon implement it, however, they said that it's not easy to do.
... View more
01-26-2023
05:29 AM
|
0
|
1
|
259
|
POST
|
Hello! I am wondering if you are planning to add buttons to be linked with screen groups any time soon? Unfortunately, blocks and views are not enough for our experience setup. We set it up as a screen group scrolling page and would like make a menu for subsections using buttons, and those buttons could link them to separate text boxes inside the scrolling panel... however, i didnt see it to be possible. And the whole or many screen groups reside in one and the same block. Maybe I am missing something?
... View more
11-10-2022
07:51 AM
|
0
|
1
|
2391
|
POST
|
I second this to @AJ_devaccount and @MarisaKordecki and @studebakers_Boulder - any guide has been prepared for us to be able to maximize accessibility in Experience Builder? @TonghuiMing @Jianxia
... View more
10-26-2022
12:05 AM
|
1
|
0
|
1341
|
DOC
|
When will it be possible to use Analysis tools in the new Map Viewer Beta? It's a big disappointment.
... View more
12-27-2021
03:13 AM
|
1
|
0
|
3670
|
POST
|
Hello Ismael, what about a possibility to set a constraint only to one of the choices in the drop-down? Is that possible? There are four possible choices, but constraint is needed to only one of those in the next question. Thanks in advance. -Aurelija
... View more
12-13-2021
12:15 AM
|
0
|
0
|
454
|
BLOG
|
Hello, @IsmaelChivite @Anonymous User I have a custom question. Is it possible to use webmap bookmarks in survey123 when the webmap is linked to survey123? We are looking for a smart way to get zoomed in to certain places across specific area based on the selected city in previous dropdown question. Once the survey submitter gets zoomed in to the concrete location, he will then draw a polygon parcel that he wants to apply for, meaning it has to be a geoshape question with a map. Looking forward to any insight to this as we a little stuck on this question! -Aurelija
... View more
11-16-2021
02:32 AM
|
0
|
0
|
16243
|
POST
|
Hello @JamesTedrick , Is it possible to do the same with a geoshape question? To populate geoshape question map with locations from choice list? I feel a little stuck here ... any guidance would be very much appreciated!
... View more
11-15-2021
06:49 AM
|
0
|
0
|
503
|
BLOG
|
@IsmaelChivite @BrettStokes Hello, I am trying to do a very similar set up for our Survey123 as described in here previously: Is there a solution for this? Currently I'm using a CSV with city coordinates lat and lon to prepopulate the geopoint question. However, we need applicants to draw polygons on Survey123 in each of their selected city locations and we need the map to zoom-in based on their selection. So I can't figure out how to use the CSV coordinates to prepopulate the geoshape question? Is there a special way how to create a polygon coordinate string from the point coordinates, for example? Thanks a lot in advance! You can also contact me at auvu@cowi.com
... View more
11-15-2021
05:16 AM
|
0
|
0
|
22843
|
BLOG
|
@IsmaelChivite Hi Ismael. I already solved the issue by recreating everything from scratch, the only thing I changed when creating Feature Class from scratch is that Shape field > Allow Null > No (it was set to Yes previously, by default it seems). After this and all the identical setups, the polygons are drawing up on all maps and applications without problems. But answers to your questions (for the record) are: Polygons were not visible in ArcGIS Desktop. Polygons were not visible in the webmap (Map Viewer) (actually, an error with exclamation mark was showing up "the features were not drawn completely") I am not sure how to check the version of the database or what you mean by it. It is an enterprise database with archiving enabled, non-versioned datasets. The environment is all 10.8 /Aurelija
... View more
09-08-2021
06:56 AM
|
1
|
0
|
25930
|
POST
|
Hello @JohnathanHasthorpe or @JamesTedrick , do you know if anything has changed regarding this in 3 years? 🙂 I am looking how to change the "thank you for submission" message in Survey123 Connect. Additionally, I saw that it is possible to edit the Thank you page on the Survey123 Website. However, is it possible to insert any of the survey field values (related to the just created record) into it? I tried this text and it didn't work out: " Great! Your application was sent successfully. Thank you. Your Case ID is {app_id}. This application handling will cost you 300 DKK whether or not it will be approved. " app_id is a field name in the feature service which the survey123 is based on. Any advice is highly valued!
... View more
09-07-2021
07:14 AM
|
2
|
3
|
1313
|
BLOG
|
@IsmaelChivite @JamesTedrick @BrettStokes I am experiencing problems with Survey123 registering polygons with geoshape question type. What i'm working with: ArcGIS Enterprise 10.8 and ArcGIS Survey123 Connect v3.12 as well as ArcGIS Survey123 App v3.12 I have published a feature service (with ArcGIS Enterprise Server) from an Enterprise Database (.sde) (a polygon feature class with a related table (1:many), global ids, archiving enabled, sync enabled, non-versioned and all the requirements for such feature service to be possible to publish). I have then created a Survey123 in the Connect app from this feature service. In the survey we want to draw polygons and collect data about these polygons. Whilst no errors appear when publishing the survey, answering and sending the survey results, when trying to check the records in the Survey123 website on a map - they do not draw on the map. It seems to me that this drawn polygon is somewhere lost along the way. All attributes are visible except the polygon itself. The web map is just blank. The Shape size and length is 0 in ArcMap (see screenshots below) How can we fix this? I can't work like this any further and I don't understand what could be the root cause.
... View more
09-01-2021
11:54 AM
|
0
|
0
|
26178
|
IDEA
|
I agree, this is a very useful idea and hopefully will be soon implemented!
... View more
08-27-2021
02:03 AM
|
0
|
0
|
1558
|
POST
|
Hello Jim, (wasn't able to tag Zheng Liu) I've got a similar error again, but I'm not sure what it actually means or where it could be coming from. Maybe you will have an idea? /Aurelija
... View more
11-24-2020
07:20 AM
|
0
|
1
|
3713
|
BLOG
|
Thank you Philip, and I have one more question. So the user who created the webmap has shared this webmap and all the layers with me on the Portal. I am able to link this webmap into the Survey123 Connect app and see it as well as print it inside the Feature Reports. However, we cannot see one layer from the webmap which is an Orthophoto taken from WMS. Is this a limitation of Survey123 custom basemaps feature or is there something that we might be doing wrong? The cadastral map and orthophoto comes from this WMS: https://services.kortforsyningen.dk/service?servicename=forvaltning&version=1.1.1&token=cf308b752430c57e257e16b094ff2c8e&SERVICE=WMS&REQUEST=GetCapabilities And the cadastral map is visible, but not the orthophoto, as in the examples below: Screenshot of webmap from Portal: Screenshot from linked same webmap in Survey123 Connect: And another issue, but not that critical, is that the linked webmaps are loading pretty slowly in Survey123 Connect app and sometimes I need to close the app and start again to even see the chosen webmap. Basically swtiching from one linked webmap to another linked webmap is pretty tricky-slow. Any input from your side is highly valued! Aurelija
... View more
08-27-2020
04:54 AM
|
0
|
0
|
25080
|
BLOG
|
Hello Ismael Chivite's Blog , Thanks for letting us know the updates in detail. Regarding the custom basemaps to use in Survey123 surveys for users. 1) If I am not the administrator of the organization, but I am an author of the Survey123 (Connect). Can I Link my published webmap (custom basemap) from ArcGIS Portal to Survey123 Connect? Do I need any other "permissions"? 2) Does this also mean that when printing Feature Reports, this custom basemap will be printed out for geopoints? In Feature Reports I need to specify the webmap item id as far as I remember. Is there anything else I should take into attention? Will be looking forward to your answers, thanks a lot in advance! Aurelija
... View more
08-19-2020
04:33 AM
|
0
|
0
|
25080
|
Title | Kudos | Posted |
---|---|---|
1 | 10-26-2022 12:05 AM | |
2 | 09-07-2021 07:14 AM | |
1 | 12-27-2021 03:13 AM | |
1 | 09-08-2021 06:56 AM | |
1 | 06-15-2020 04:17 AM |
Online Status |
Offline
|
Date Last Visited |
01-26-2023
01:31 PM
|