|
POST
|
Hi there I have a model which create a FOLDER A and another one creates 10x Subfolders in FOLDER A. Now i need a model that creates 15x "sub"-subfolders Like "For each folder in FOLDER A create 15 new subfolders inside". I can't figure it out...please help *S*
... View more
03-06-2012
10:28 PM
|
0
|
0
|
770
|
|
POST
|
You could try to disable the Automatic GPS connect in your device ArcMobile. Then YOU have to connect when you need the GPS. But to get the position you need the GPS ON and the "failure" you mention is ONLY when the GPS has no 3D fix at the SAT...so it will (or should) only be temporary in the beginning.
... View more
01-09-2012
01:26 AM
|
0
|
0
|
573
|
|
POST
|
Hi there I have made a slope on a dem (pixels 1.6m)...then a reclassify on it with 7degree/Nodata.......now i have a lot of "coverage"....small areas/large areas/thin areas/wide areas.......but i need to find specific areas like squares at 25sqm/100sqm/150sqm and they HAVE to be axactly 5x5/10x10 etc. I have tried RegionGroup/Zonal and more but I can't find the "solution"...anyone with a hint to do this ?? (there is to much data in the raster to convert it to polygons, so that won't work directly). The product should be used to a kind of automatic site selection in areas with a maximum of 7 degree and with no land use obstacles in 50 meters buffer and on solid ground (no water or man made things)
... View more
12-13-2011
05:54 AM
|
0
|
0
|
802
|
|
POST
|
Hi there Will it be possible to make a model that there will run based on a user selection/choice. 1) User can select from a table Named "Types". [INDENT] Volvo BMW Opel VW Chrysler [/INDENT] These items will then have some attributes like "speed", "weight", "KM/gallon" etc. 2) Based on the selection, the model shall then run with only the choosen parameters. Like do a "buffer" based on "speed".......a calculation on "weight" according to "KM/Gallon" etc.
... View more
12-02-2011
02:28 AM
|
0
|
0
|
839
|
|
POST
|
In the Mobile Apps, he should (in the right side) se a plus/minus icon and and "arrow". Click this "arrow" and you will se "Layer Visibility" and her you can check the layers on/off.
... View more
12-01-2011
09:29 PM
|
0
|
0
|
264
|
|
POST
|
I make the MXD in ArcMAP. I use the GP tools to make the Cache. I use the Server to make Raster tile caching. I use Project Center to add the ArcMap made operational layers and the server basemaps. I use Project Center to make som national language settings. I "save a wmpk" from MPC. I install the wmpk on a PC (it comes with a failure, because it cant see the cache.....somehow the install forces a P_ in front of the folder name and therefor it can't installe the cache, but i copy mine to the installe folder afterwards and then i will function). I copy the Raster tile caching from the server to the USB stick My fGDB is also the USB stick. I can now open the project in Mobile on a tablet and i WORKS fine. I can open the project from the PC i mobile and it works. EVERYTHING is on a USB stick. But if i take the USB stick and use it from a laptop it get's broken links in the MXD ?????? And i have to deploy a functioning project on a USB stick, because our field-teams are without GIS knowledge, they are in the mittle of nowhere and they only have the Mobile on their tablets/gadgets.
... View more
11-17-2011
10:08 PM
|
0
|
0
|
500
|
|
POST
|
I have made a Mobile Project on an USB-stick. On this stick is also the fGDB, Tile-Cashe folder with basemaps etc. There is relative path on everything. Everything is functioning OK on my PC from the USB, and i can move it from C: to 😧 and to E: and it will work. BUT when i move it to another PC it wil get broken links to data.....:WHY ??? Even if i open the mxd through the LAN i wil get broken links.......WHY???? Yes i can fix it, but then i mesh-up the Mobile Project. I can afford this because i have to send a fully functioning Project from Country A to Country B and the guys in the other end has only ArcGIS Mobile. Any solution ???????????????
... View more
11-17-2011
04:42 AM
|
0
|
4
|
778
|
|
POST
|
Hi There I have made a project for Mobile with a fGDB and everything works fine with check out and syncronization. BUT I need to move the complete folder (fGDB, mxd, the project and basemaps) to another network and when I do that it will still syncronize with a green good tickmark, BUT when i look at arcmap there is nothing and the tables are empty???????? If i then look in the fGDB from Windows I can see that all the files from the project has a sr.lock on them....WHY??? And what do I need to do so that I can move the folder and it still works ??
... View more
11-15-2011
10:47 PM
|
0
|
0
|
634
|
|
POST
|
Be aware of setting your extent small in the "Layer option" otherwise you will get the full datasets. You have to take that "package" that ArcMap created and open it in ArcGis Mobile Project Center (MPC).......set it up here and save it. The MPC then makes a kind of zip file you can deploy to your tablet and install. IT WILL install with a failure, but i have described (and a lot other guys) the work around in another post. I think taht if you do a search on the forum you will find a lot of information, so you will get a succes.
... View more
11-14-2011
10:14 PM
|
0
|
0
|
520
|
|
POST
|
Could you please give an example of the code for the query.
... View more
11-14-2011
06:54 AM
|
0
|
0
|
423
|
|
POST
|
Your FeatureClass has to have a field Named Picture_1 and has to be Raster. Then you can attach 1 picture. You can also have several Picture_2, Picture_3 fields with BLOB as format, but those you can see in ArcMap, but you can then have multiple picture in Mobile attached to one object. There is no "out of the box" function in Mobile to attach a photo directly to the object....you have to have the field above and the "browse" for it. But it will automatic syncronize them back to ArcMap and to your geodatabase, where you can use them.
... View more
11-14-2011
06:53 AM
|
0
|
0
|
437
|
|
POST
|
Found the problem myself. If your PC has ArcGis Project Center to open up the .wmpk file by default, they file will work approx. 80%, but things wiil be missing. Set the PC to open the .wmpk with ArcMobile and it will ask you where you will install the package, but it will install with a failure (you have to accept that...i think its a ESRI thing). Then you copy your CACHE folder into the "installed" folder (called with your given name and a P_ in front) Then you have to open up the "installed" .amp and change like mentioned above. Set ArcMobile setting to look in your TOP-folder...restart....and now it will find your project and your basemaps. ESRI????.....it this the BEST you can do ????
... View more
11-14-2011
06:48 AM
|
0
|
0
|
560
|
|
POST
|
Hi tony.farndon Thoose lines you mention is not in my amp file ??? The Server Map Cache works in project center but not in ArcMobile and they are copyied to the tablet.
... View more
11-11-2011
12:26 AM
|
0
|
0
|
560
|
|
POST
|
A layer with GLOBAL ID is selectable. A layer withtout GLOABAL ID is viewable. Maybe that could do it for you.
... View more
11-02-2011
10:54 PM
|
0
|
0
|
295
|
|
POST
|
put your files in a folder an use iteration from within modelbuilder.
... View more
11-01-2011
10:04 AM
|
0
|
0
|
546
|
| Title | Kudos | Posted |
|---|---|---|
| 1 | 06-25-2012 01:31 AM | |
| 1 | 10-10-2011 07:27 AM | |
| 2 | 11-09-2015 04:39 AM | |
| 1 | 05-01-2013 03:06 AM | |
| 1 | 03-13-2012 04:52 AM |
| Online Status |
Offline
|
| Date Last Visited |
11-11-2020
02:23 AM
|