Latest Contributions by AnthonyLatini

‎02-05-2024

@COSPNWGuy @ISP_graynic @ZachBodenner @Blevins_Mark - That is correct. The ArcGIS Enterprise connector should be available in the government tenant (apologies for the slow delay in getting it deployed). We are currently in a deployment process to have triggers set up in the ArcGIS Enterprise (purple) connector that mimics the same behavior as the ArcGIS Online connector (orange). Meaning, you won't need to go through steps listed in the link below in 11.2 and above. Once those have been deployed, you can configure triggers as you would in the ArcGIS Online connector as long as your Enterprise instance is on 11.2 or higher. If you are on 11.1, then you must set up triggers and webhooks using the steps in this guide: Enabling webhooks and Fetch Updates for ArcGIS Ent... - Esri Community As for the documentation link that @ISP_graynic posted; it is slightly outdated. All actions that are available in the ArcGIS Online connector are available in the ArcGIS Connector. We are working to update that documentation page in our next release. Let me know if this helps!

‎01-03-2024

@ireladan - Thank you for the data! I had a look at it and saw the same behavior. I was able to recreate some of this data and it now appears properly in ArcGIS for Power BI. Please let me know if this dataset helps. I have added a screenshot to show how it should appear in the component. In the Location type widget, ensure you select the appropriate data fields to render the boundaries on the map. You can use either Closest match or Exact match and the results will be the same.

‎12-28-2023

@ireladan - Thank you for reaching out. Would you be able to share your dataset here with me? I would like to test this against a newer build that we will be sending out in Q1 of 2024 and I want to see if it has been resolved there. Thank you!

‎12-28-2023

@JJ_Reyes - The flow should trigger so long as the associated layer is linked with the trigger. The source of the edit, create, or delete should not matter as long as the appropriate permissions are set up on the layer (meaning that editing is enabled, etc.). We may need to jump on a quick screen-share to see the behavior since sharing screenshots might be too cumbersome here. Please send an email to: [email protected] so that we can coordinate a time to take a look.

‎12-27-2023

@BenClark @TL2 - Hi there. I think where the hang up might be is passing the geometry value in the Create a record in a feature layer action. Let me know if the following steps help out and if this is what you were looking to do in your flow. You can set this flow up to run manually or to run it as a trigger as mentioned in the blog post (When a record is created in Salesforce). 1. In the Create a record in a feature layer action, paste the following code into the geometry field. { "x": INSERT_YOUR_LONGITUDE_FIELD_FROM_SALESFORCE_ACTION, "y": INSERT_YOUR_LATITUDE_FIELD_FROM_SALESFORCE_ACTION, "spatialReference": { "wkid": 4326, "latestWkid": 4326 } } 2. It should look something like this after it is inserted and you have selected the layer you want to update. 3. Run the flow and the new features should appear on the map.

‎12-15-2023

@DominicRobergeIADOT - Thank you for reaching out. This is working as expected. Our visual is currently not certified with Microsoft as we are considered a third-party visual. Please let me know if this helps! Reference: Get your Power BI visuals certified - Power BI | Microsoft Learn

‎12-07-2023

@MadisonOConnell - I noticed a similar topic posted by @SrinivasKrishnaswamy . I will post the steps here and see if you have any luck getting these values to appear. Navigate to the Map tools and expand them (if they aren't already expanded) 2. Open the Table of Contents widget 3. On your data layer, click the ellipses (...) and select Location type 4. In the Location type widget, filter the results down to the following: 5. You can try using Closest or Exact to see what results appear Let me know if this works! If not, we will need to work with our geo-enrichment team as they manage the data that is being brought into ArcGIS for Power BI.

‎12-07-2023

@SrinivasKrishnaswamy - Hi there. Let's see if we can get this up and running. After you add the data to the Location field well, perform the following steps to see if the data appears properly. 1. Navigate to the Map tools and expand them (if they aren't already expanded) 2. Open the Table of Contents widget 3. On your data layer, click the ellipses (...) and select Location type 4. In the Location type widget, filter the results down to the following: 5. You can try using Closest or Exact to see what results appear Let me know if this works! If not, we will need to work with our geo-enrichment team as they manage the data that is being brought into ArcGIS for Power BI.

‎12-04-2023

Hi @DominicRobergeIADOT. Thank you for adding this idea. This is an enhancement that is controlled by Microsoft and has been an ask by our group as well. As a note - to remain logged in, a flow should run at least once within the given token timeout period. As long as you have a flow that makes use of the connection, then it will stay active. I keep a "dummy" flow running with "Get data from feature layer" that checks every 10 days to pull data from a test layer I created.

‎12-01-2023

An issue was reported in a few threads on the forums related to fetching updates after a trigger was initialized and having it return an empty response. This could cause any actions after this to fail since the subsequent actions are waiting for information to passed through (which was not happening). We have pushed an update to the ArcGIS Connector in Power Automate to fix this issue. This issue has been tested extensively and appears to be resolved. This fix has been deployed to production. NOTE: The issue with empty arrays is still under investigation and has not been resolved in this push. Before fix: Note that the response is empty, but the "handshake" between Power Automate and ArcGIS Online was successful. After fix: Here is the same layer, but with the correct response and information. Food Analogy: I was thinking of a good way to describe what is happening in the action and came up with a clever way to think about it. Scenario 1: empty response Scenario 2: empty array Imagine you go to your favorite restaurant and order your favorite dish. You place your order with the server, and they say it'll be a 2 to 15-minute wait before the food shows up. In the first scenario (the one that was fixed in this push), the server places the order, hears a bell that tells them table 42 is ready, heads to the kitchen for pickup, and then comes back to your table empty handed. In the second scenario (the empty array scenario that we are still investigating), the server places the order, hears a bell that tells them table 42 is ready, heads to the kitchen for pickup, and then comes back to your table with an empty plate. As always, please let us know if this specific issue is still occurring for you and your flows. 😄

‎12-01-2023

Hi @NataliyaLys - We have pushed an update (around that time yesterday) to the ArcGIS Connector in Power Automate to fix one of the two issues that have been reported in multiple areas (and thought it would be good to post in this thread). I will be making a larger post about this shortly for the whole board to see. 😀 When the Fetch updates action is called, it returns an empty response This issue has been tested extensively and appears to be resolved. This issue has been deployed to production. NOTE: The issue with empty arrays is still under investigation and has not been resolved in this push. Please let me know if you have any questions or if you see any other additional unwanted behavior.

‎11-30-2023

@ahargreaves_FW @RachaelMurtaugh - Good afternoon. I wanted to let you know that we have pushed an update to the ArcGIS Connector in Power Automate to fix one of the two issues that have been reported in multiple areas (and thought it would be good to post in this thread). I will be making a larger post about this shortly for the whole board to see. 😀 When the Fetch updates action is called, it returns an empty response This issue has been tested extensively and appears to be resolved. This fix has been deployed to production. NOTE: The issue with empty arrays is still under investigation and has not been resolved in this push. Please let me know if you have any questions or if you see any other additional unwanted behavior.

‎11-30-2023

@PeterSmith2023 - Thank you for adding a topic about this issue and thank you @Ian_Muehlenhaus for responding! I have looked into this issue and I will need to work with our geo-enrichment team (as well as our own group) to determine if we are handling these regions properly. When attempting to add them to the map, ArcGIS for Power BI will default to the World Geocoder as the boundary names could exist in other areas of the world. This is also true when using subregions of Norway. However, when attempting to change them to boundaries, I can see an error that is being generated by the geo-enrichment service and only Oslo is added to the map. I will create a bug for this issue in our project and will keep this thread posted on when this issue can be resolved. Thank you for your patience on this problem and I hope we can resolve it in a timely manner. 😀

‎11-30-2023

@ssweat - Hi there! As mentioned in previous posts, we are working to resolve this issue. At the moment, there isn't an ETA, however, this is the top priority on the team to resolve issues surrounding Fetch Updates. Thank you for your patience on this issue!

‎11-27-2023

Thank you for the update @JessMiller1 . This error is slightly different than the one that was resolved. We are still looking into this error as well. Two quick questions on this: 1. Does this error still occur in an incognito/private window? 2. Does this happen in your account or multiple ArcGIS accounts in your organization?

Online Status	Offline
Date Last Visited	‎12-13-2024 08:23 PM

My Ideas

Latest Contributions by AnthonyLatini

Re: Can ArcGIS for Power Automate be used with Enterprise yet?

Re: Dublin County not being Dislplayed Correctly

Re: Dublin County not being Dislplayed Correctly

Re: "When a record is updated in a feature layer" not trigger with Experience Builder update

Re: Create Features from Salesforce XY Data

Re: Export report to PDF issue

Re: Congressional District Mapping Incorrect

Re: Displaying data in Congressional Districts

Re: Being able to rename an ArcGIS Connections

Update: 12/1/2023 - BUG-000163195 The 'Fetch updates, changes, or deletions from feature layer' action sends back empty responses

Re: Power automate fetch updates is not creating a valid input?

Re: Anyone use Make or Microsoft Automate for Webhooks?

Re: Regions Norway

Re: Power automate fetch updates is not creating a valid input?

Re: Unable to retrieve feature layers when setting up ArcGIS Connector in Microsoft Power Automate

Re: Why does interaction between ArcGIS data and o...

Re: Can ArcGIS for Power Automate be used with Ent...

Re: 8/15/24: Update and quick fix for issues with ...

Re: flow with ArcGIS connectors stopped working

8/15/24: Update and quick fix for issues with Webh...