POST
|
I'm experiencing something similar. Using React 17 in dev mode the AGO webmap loads as expected. Run build and the web map does not load at all, although I see the esri-view-root div added to the DOM. I noticed the canvas tag, shown below in dev mode, is missing from the DOM when running the production build version of the app: Thanks to your suggesting I updated to 4.24 and the problem seems to be resolved.
... View more
05-09-2022
04:55 PM
|
0
|
0
|
1977
|
POST
|
EricA, Thank you for this advise as it helped lead me to my problem. I wasn't using a reserved word for a field name, but noticed that I had used the same name for multiple note fields. XLS didn't flag the error, and I don't often use notes in survey designs, so I didn't realize that notes style "questions" are included in the table schema and therefore must follow the same rules as far as not being duplicated. I have attached a screen grab of the XLS that shows the two note fields with same names not flagged red, and two other question types with same name that are flagged as red as a comparison. Thanks again.
... View more
10-18-2021
01:42 PM
|
2
|
1
|
1697
|
POST
|
Thank you for your input Nico. I have been in communication with a member of the Site Scan dev team and we are working through possible causes for these hangups. Site Scan is version 4.1.2 and iOS version 14.7.1. I am using an authentic Apple cord, and have also tried using another cord without any change in behavior. I'm careful not to have other apps running in the background as the problems that could cause was explained to us when we started the eval. Today we submitted the logs so hopefully they will shed some light on what may be going on.
... View more
07-29-2021
01:47 PM
|
0
|
0
|
2310
|
POST
|
Our organization has been testing Site Scan over the last few weeks and have been impressed with its capabilities. However, we are running into some issues with our Inspire 2 failing on preflight checklist. Ocassionally it runs right through the checklist and begins mission without issue, other times it spins on one of the checklist items and eventually errors or times out. There's not really any rhyme or reason that we are noticing as to when it passes through the checklist and when it doesn't. Our organization has a couple other drones and controllers that are able to run through the preflight checklist without any issue. To me it seems like it's an issue of communication between the controller and the iPad. Radio connectivity is good, however, and we are able to use DJI Ground Station Pro without any problems. The issue seems to be specific to when trying to fly a mission in Site Scan. I did find a setting within DJI GO 4 that allows for the controller to continuously charge the iPad (or phone) that it is connected to. This afternoon I enabled this option so that the iPad is continuously pulling power from the controller and was able to run straight through the preflight checklist without any issues. The connectivity during the flight seemed crisper as well with very little lag on the video feed from our Zenmuse X4S camera. I'm not sure that it's related, could purely be a coincidence, but was curious if anyone else who uses Site Scan and has issues passing preflight checklist, especially with an Inspire 2. Thanks.
... View more
07-28-2021
01:40 PM
|
0
|
2
|
2363
|
POST
|
Thank you so much Robert! That seems to have worked. Is there a setting within eSearch that will allow for search results from multiple layers to be displayed in the results window? So for instance, I am searching against Parcels and Zoning Districts (two polygon layers) and when the search is conducted only the Parcels layer is appearing in the results window: If I change the order of the search layers, the Zoning Districts layer is returned in the results window:
... View more
02-04-2021
01:38 PM
|
0
|
2
|
1924
|
POST
|
I am somewhat new to WAB developer and am trying to accomplish what I would think would be a fairly simple task. I would like for the user to be able to use the Search widget to search by address (using either our locator or an address point layer, either are available) and for the results to return attributes from certain polygons that the point falls within. So for instance, searching by address returns attributes from parcel and zoning, two separate layers. Somewhat similar I feel like this functionality is available somewhere, however I'm just missing it. I don't necessarily want the user to have to place a point on a map for the attributes from the two layers to be returned, I'd like for the point that is created by way of the Search widget to "trigger" the identify widget (or eSearch widget if appropriate.) There is similar functionality with the NearMe widget, however what I really want is to intersect any polygons that the point falls inside of rather than a buffer distance from a point. Thanks for any suggestions or help!
... View more
02-04-2021
09:39 AM
|
0
|
4
|
1937
|
POST
|
Alexandre, I am having the same issue. I have a WMS service that I would like to use as a basemap within WAB. The basemap is available in Portal but does not respond in WAB. Doesn't make sense to me.
... View more
12-08-2020
07:33 PM
|
1
|
1
|
3395
|
POST
|
Thank you Ryan for posting the work around for the redirect URI issue. This was an issue for me as well and your work around helped me out.
... View more
11-05-2020
12:37 PM
|
1
|
0
|
2854
|
BLOG
|
Karina, I'm curious about this option also (auto-closing a tab or window when a survey is completed.) I had a project where I was also using an embedded survey within a dashboard that worked fine for several months but just recently I am getting feedback that it's not working correctly in Chrome (says inaccessible survey.) To clarify the setup is using Survey123 to edit existing features within a dashboard. I noticed that the URL used in the embedded content widget worked fine in a new tab within Chrome, so I did a little research and found a way to open the survey in a popup window rather than within the embedded content widget. I actually like this method more as the embedded content pane does not take up room on the dashboard unless it's actively being used. However I would like for the popup window to close once the user hits "Submit" but haven't found this to be an option. Not the end of the world as the user just needs to close to window manually but it would be nice if this were an option.
... View more
08-26-2020
01:57 PM
|
0
|
0
|
12506
|
POST
|
Brett, The question is a decimal type. On a side note, one of the first things I tried was setting 'bind::fieldType' to 'Double' without any luck. Thanks for following up.
... View more
08-11-2020
06:23 AM
|
1
|
0
|
2422
|
POST
|
I have a form that has been working without issue since the Spring. However, now when using Android devices, a question that is a double field type is having the decimal moved to the right. More specifically it's being moved to the right of the last number. So, for instance, if the user inputs 97.8 the decimal moves to the right and the input becomes the integer 978. If the user inputs 97.80, the decimal again moves to the right and the input becomes the integer 9780. I have not made any recent changes to the form and the app has not updated since May so I'm not sure of the problem, unless it's related to an Android OS update. Edit: I created a test survey with just one decimal field type question and it is also behaving the same way. I'm leaning towards it being something related to a recent Android update but cannot be certain at this time. Edit: I figured out a fix. I changed the "Appearance" for the question from default to "Numbers" and it no longer moves the decimal. Still unusual that it wasn't a problem before today but I think that resolves the issue nonetheless.
... View more
08-04-2020
08:45 AM
|
0
|
7
|
2500
|
POST
|
You aren't, I am in the exact same boat. I have a Survey123 for long term care facilities and covid-19 related infections are updated daily or semi-daily. I would like to display only the most recent report for each facility and cannot accomplish this by just filtering within a certain time period as the frequency of these reports is not consistent. I've been searching through threads and have yet to find a good way to accomplish this goal.
... View more
04-17-2020
01:19 PM
|
6
|
2
|
9698
|
IDEA
|
It would be nice if there was the ability to set up a "widget action" where if a particular widget tab is selected it triggers one or more other widgets to also become active. For instance, I have a series of charts regarding Covid-19 that have accompanying indicator widgets for each chart. It would be nice if when a particular chart widget is activated by selecting its tab, its corresponding indicator widgets were also activated/displayed. Thanks!
... View more
04-05-2020
07:03 AM
|
2
|
0
|
624
|
IDEA
|
It would be nice if there was the ability to set up a "widget action" where if a particular widget tab is selected it triggers one or more other widgets to also become active. For instance, I have a series of charts regarding Covid-19 that have accompanying indicator widgets for each chart. It would be nice if when a particular chart widget is activated by selecting its tab, its corresponding indicator widgets were also activated/displayed. Thanks!
... View more
04-05-2020
07:03 AM
|
2
|
0
|
477
|
Title | Kudos | Posted |
---|---|---|
1 | 12-08-2020 07:33 PM | |
1 | 04-01-2020 07:34 AM | |
2 | 10-18-2021 01:42 PM | |
1 | 07-05-2018 01:06 PM | |
1 | 11-05-2020 12:37 PM |
Online Status |
Offline
|
Date Last Visited |
05-15-2023
05:15 PM
|