Latest Contributions by Andrew-Bowne

‎05-10-2022

Did you check to ensure that the "LEVEL_ID" for each floor is unique? Also, that there is a value for each?

‎05-06-2022

Hi All, I have a webmap with 4 GeoRSS feeds displayed. Each feed is set to refresh at an interval of 0.1 minutes (the min value that can be set). With the new map viewer, the feeds never seem to refresh. If I open the map with the old map viewer, they refresh as expected. Anyone else experience this? Is there a workaround?

‎05-02-2022

Hi @GordonSumerling - Thanks for the reply. We fly a DJI M300RTK with the P1 camera capturing RGB. Almost all the mission was flown at 400ft AGL with the exception of a section we needed to fly higher to clear some tall buildings. We used terrain follow throughout. Please let me know if you need any further information. Thank you for your help!

‎05-02-2022

I am attempting to process ~6200 photos in Site Scan. No matter what size output orthophoto or point cloud I choose, I get a failure to process error. I am assuming there is a timeout happening somewhere. If that's the case, there should be an increase in the timeout settings so users can process large numbers of photos. I was able to process the same area using Drone2Map without issue.

‎05-02-2022

Provide the ability to create a flight plan using a polygon from a Feature Layer similar to how it's done using Site Scan Flight. This would allow for the same functionality at the desktop as you can do on a tablet.

‎05-02-2022

Provide the ability to overlay feature layers from both ArcGIS Online and Portal for ArcGIS. Currently there is no way to directly overlay layers that already exist in AGOL or Portal. You have to export them out as shapefiles and upload them. The ability to directly read layers from AGO or Portal would be a great benefit.

‎05-02-2022

When using a Polygon Feature Layer to define mission areas, it would be nice to have an attribute schema for the feature layer that could map the flight parameters a pilot defines in Site Scan Flight. For instance, this Feature Layer Attribute Schema could have attributes for: Elevation Sidelap Overlap Terrain Follow(Yes/No) Geofence (Yes/No) GimbleAngle HatchAngle etc. etc. etc. When choosing a polygon to define a mission, any of these attributes will be automatically populated in Site Scan Flight. This would be extremely helpful with providing consistency for repetitive missions flown over time. A pilot would no longer need to remember or record this information. It would be populated from the Feature Layer.

‎04-28-2022

Add a label on the map to show which waypoints the Drone will start at and which it will end at. That way the pilot will know where to expect the drone to start and end. Otherwise, it's a bit of a guess. All we know is it's either the "furthest" or "closest". a visual on the map would be very helpful.

‎04-28-2022

It would be very helpful to show an icon on the map at every location a picture is taken. Currently you see the flight lines, waypoints, and drone location. It would be very helpful to know at what locations/duration during the flight the pictures are being taken. Otherwise, there is no way to know or confirm that photos are being taken. This feature exists in Pix4D capture and we have found it to be very helpful as a system of checks and balances.

‎04-28-2022

Additionally - if not using MDM, to be able to store Portal URL and login info similar to other Esri mobile apps. that way you don't have to enter a portal url , username, password, every time you log in to Flight...

‎04-13-2022

We are setting up a flight plan to fly over a few hotel towers we have on our site. When I try and set the altitude for the flight, it says that the max is 630ft. We are hoping to fly at 700ft. That way we will be able to get enough coverage without distortion along the sides of the towers and ensure we are well above the structures. I have looked all over in the settings and can't find anywhere to change the max altitude. Is there a way to change this? Thank you!

‎04-08-2022

Hi @NicoBonnafoux , I took your suggestion and tried reprocessing with an adjusted accuracy of 0.1ft for x/y/z and it seemed to have solved the problem. I am rerunning with the highest resolution right now to see if the output is the same as when running with the lowest resolution. Thanks for the suggestion. Would you suggest always using modifying the RTK accuracy settings when processing? Would you suggest still opening a ticket? I can't really show an analyst the result now that it has been corrected.

‎04-07-2022

We did a corridor flight with our M300RTK earlier this week and got some weird results when processing in Site Scan. It looks like it skipped a section of the road and where it picked up, the images are all oriented incorrectly. Any thoughts on what could be going on? AndrewBowne_0-1649350735333.png AndrewBowne_1-1649350770796.png

‎03-28-2022

Allow the ability to connect to other 3rd party cameras (such as 360 Cameras) via bluetooth to capture and attach images to features.

‎03-22-2022

You're close... really close.... in your Make Request, add: "/addAttachment" at the end of your URL. If you wanted to kick it up a notch, you could use elements from the Watch Survey module's response to build your HTTP request. Something like this: AndrewBowne_0-1647969171175.png

Online Status	Offline
Date Last Visited	‎09-24-2025 09:52 AM

My Ideas

Latest Contributions by Andrew-Bowne

Re: Floor Picker not working (even w/ Indoors extension)

New Map Viewer (10.9.1) Refresh interval not working

Re: Increase the timeout for processing large number of photos

Increase the timeout for processing large number of photos

Define Mission Area from Polygon

Include ability to add feature layers to missions

Map field attributes to flight parameters when Defining Mission Area from Polygon

Add label for start waypoint and end waypoint

Add icon showing each location a picture is taken

Re: Site Scan LE app - support MDM app config eg portalurl

Site Scan Flight - Increase Max Altitude

Re: Weird Results when processing Corridor Flight

Weird Results when processing Corridor Flight

Capture photos with external (360) camera

Re: Working with Survey123 attachments in Integromat

Re: Blank Map Viewer for All Web Maps After ArcGIS...

Re: Mapping assets in Indoors

Frequently needing to clear browser cache - Experi...

Re: Edit Widget- Submit button is missing

Re: 11.5 upgrade cache issues

GIS Leadership User Group