|
POST
|
Hello GIS friends, I have a custom print service in ArcGIS Enterprise 11.4 and have encountered an issue while configuring it for multiple file formats. When attempting to select more than one format, I can only select a single option. In the screenshot below, you’ll see that I have selected PDF, but I would also like to be able to select additional formats so that the option to print in a variety of formats is available, which I am currently unable to do. I would greatly appreciate any guidance or suggestions you might have regarding this issue. Thank you so much for your time and assistance. Abi
... View more
03-14-2025
05:50 AM
|
0
|
1
|
588
|
|
DOC
|
@AKRRMapGuy @Jianxia - Append shapefile from local drive not working in Experience Builder. I'm sorry to bother you again, but I'm replying to your above response from 06/28/2024 where you asked me to republish my append tool with a parameter on the shapefile. In my response I mentioned that it worked, but today when I'm checking back it is not working. Would you please confirm and let me know if a custom Append web tool published from ArcGIS Pro when used in Experience Builder is able to append shapefile from local drive. Thank you very much. Abi
... View more
03-12-2025
12:17 PM
|
0
|
0
|
4452
|
|
POST
|
Hello GIS friends, Happy Friday! I'm having a problem with the Analysis Widget when I add a custom extract web tool. It does not let me choose all the layers I have set to be extracted. Also, when I draw an area of interest on the map there is no way to trash/delete the area of interest and redraw a new area of interest for data to be extracted unless you refresh the whole map. These are major set backs. Web AppBuilder: Lets you trash (red) an area of interest and redraw a new one. It also lets you pick a layer you want extracted. Am I doing something wrong? Your help will be greatly appreciated. Thank you, Abi
... View more
03-07-2025
06:50 AM
|
0
|
1
|
706
|
|
POST
|
Hello GIS friends, Happy Friday! I'm having a problem with the Analysis Widget when I add a custom extract web tool. It does not let me choose all the layers I have set to be extracted. Also, when I draw an area of interest on the map there is no way to trash/delete the area of interest and redraw a new area of interest for data to be extracted unless you refresh the whole map. These are major set backs. Web AppBuilder: Lets you trash (red) an area of interest and redraw a new one. It also lets you pick a layer you want extracted. Am I doing something wrong? Your help will be greatly appreciated. Thank you, Abi
... View more
03-07-2025
06:46 AM
|
0
|
0
|
471
|
|
POST
|
Dear GIS Friends, I hope you're all doing well. As you may recall, the 'Regrid_Nationwide_Parcel_Boundaries_v1' layer that Esri introduced to us this past summer when added to a web map the Screening widget in Web AppBuilder does not work. Could I kindly ask for your help in getting this to work? Thank you so much to this incredible community for your continued support. Best regards, Abi
... View more
03-03-2025
06:44 AM
|
0
|
0
|
363
|
|
POST
|
Dear GIS Friends, I hope you're all doing well. I’ve identified the issue, but I need some assistance in resolving it. As you may recall, the 'Regrid_Nationwide_Parcel_Boundaries_v1' layer that Esri introduced to us this past summer is the reason why the Screening widget does not function properly when that layer is added to the map. Could I kindly ask for your help in getting this to work? Thank you so much to this incredible community for your continued support. Best regards, Abi
... View more
03-03-2025
06:30 AM
|
0
|
0
|
663
|
|
POST
|
Dear GIS Friends, I hope you're all doing well. I’ve identified the issue, but I need some assistance in resolving it. As you may recall, the 'Regrid_Nationwide_Parcel_Boundaries_v1' layer that Esri introduced to us this past summer is the reason why the Screening widget does not function properly when that layer is added to the map. Could I kindly ask for your help in getting this to work? Thank you so much to this incredible community for your continued support. Best regards, Abi
... View more
03-03-2025
06:28 AM
|
0
|
0
|
352
|
|
POST
|
Hello GIS friends, Good morning, and happy Friday! I’m currently running ArcGIS Enterprise 11.4 and am experiencing an issue with the Screening widget in my Web AppBuilder. Specifically, I’m unable to configure the widget—it remains unresponsive. After I click to add the widget and navigate to the Analysis tab, when I attempt to add layers, nothing happens. I’ve been using this widget in my Web AppBuilder for years without any issues, but this morning when I tried to work on it, the widget stalled. I thought it might need to be reconfigured, but when I attempted to do so, it remained unresponsive. Interestingly, the widget works fine in ArcGIS Online, but not in my Enterprise environment. Any assistance or suggestions would be greatly appreciated. Thank you so much, Abi
... View more
02-28-2025
07:25 AM
|
0
|
1
|
389
|
|
POST
|
Hello GIS friends, Good morning, and happy Friday! I’m currently running ArcGIS Enterprise 11.4 and am experiencing an issue with the Screening widget in my Web AppBuilder. Specifically, I’m unable to configure the widget—it remains unresponsive. After I click to add the widget and navigate to the Analysis tab, when I attempt to add layers, nothing happens. I’ve been using this widget in my Web AppBuilder for years without any issues, but this morning when I tried to work on it, the widget stalled. I thought it might need to be reconfigured, but when I attempted to do so, it remained unresponsive. Interestingly, the widget works fine in ArcGIS Online, but not in my Enterprise environment. Any assistance or suggestions would be greatly appreciated. Thank you so much, Abi
... View more
02-28-2025
07:22 AM
|
0
|
2
|
685
|
|
POST
|
@AparnaSunki @ColinLawrence - I would change the default browser to sign in then. Colin's resolution worked for me.
... View more
02-10-2025
05:12 AM
|
0
|
0
|
759
|
|
POST
|
@CodyPatterson - Thank you for your excellent guidance. With the support of Esri, I was able to leave the collaboration from the portal, delete the collaboration from the organization, and then re-establish the collaboration by creating a new one. Afterward, I connected the workspaces to the existing groups. Now it all seems to be working. Thank you again, Abi
... View more
01-28-2025
10:17 AM
|
1
|
0
|
1978
|
|
POST
|
@CodyPatterson - Thank you for your response. Did you mean I should recreate a new collaboration altogether? Will I lose all my workspaces if I do so? I see there is an option for me to leave the existing collaboration from ArcGIS Portal, but will I still need the old invitation from ArcGIS Online to rejoin the collaboration? I can’t seem to find my previous collaboration invite from ArcGIS Online. Is there any way to regenerate the invitation from ArcGIS Online? Thank you for your help! Abi
... View more
01-27-2025
08:08 AM
|
0
|
1
|
2023
|
|
POST
|
Hello GIS Friends, I hope you're all doing well! I’m experiencing an issue where my collaboration workspace and feature items are not syncing. I have enabled sync using both the System sync tool from ArcGIS Server Manager and also activated sync for the individual items. Both my ArcGIS Enterprise Server and ArcGIS Enterprise Portal are running version 11.4. However, I’ve noticed an inconsistency in ArcGIS Online. Under Settings > Collaboration, it shows ArcGIS Enterprise Version 11.3.0, even though it should be showing ArcGIS Enterprise Version 11.4. Please see the screenshot below for reference. As always, I would greatly appreciate your awesome help with this! Thank you in advance! Best regards, Abi
... View more
01-27-2025
07:29 AM
|
0
|
4
|
2033
|
|
POST
|
Hello GIS Friends, I have ArcGIS Enterprise 11.4 installed, but I'm experiencing issues with the collaboration between the Portal and the Org. When I create a Collaboration Workspace in the Org, it does not appear in the Portal. Also, the automatic sync from an existing workspace is not functioning correctly—I have to manually sync for features to come through. Upon investigation, I noticed that the Org Collaborations page under settings shows ArcGIS Enterprise Version 11.3.0, even though I have ArcGIS Enterprise Version 11.4 installed. Could you please assist me in resolving this issue? Thank you, Abi
... View more
01-27-2025
05:44 AM
|
0
|
0
|
359
|
|
POST
|
Hello GIS Friends, Happy Friday! I have ArcGIS Enterprise 11.4 installed, but I'm experiencing issues with the collaboration between the Portal and the Org. When I create a Collaboration Workspace in the Org, it does not appear in the Portal. Additionally, the automatic sync from an existing workspace is not functioning correctly—I have to manually sync for features to come through. Upon investigation, I noticed that the Org Collaborations page shows ArcGIS Enterprise Version 11.3.0, even though I have 11.4 installed. Could you please assist me in resolving this issue? Thank you, Abi
... View more
01-17-2025
11:46 AM
|
0
|
0
|
389
|
| Title | Kudos | Posted |
|---|---|---|
| 3 | 07-07-2025 11:50 AM | |
| 1 | 03-18-2025 10:46 AM | |
| 1 | 03-20-2025 11:46 AM | |
| 1 | 07-17-2024 01:25 PM | |
| 1 | 03-19-2025 08:13 AM |
| Online Status |
Offline
|
| Date Last Visited |
a week ago
|