Latest Contributions by DavidNyenhuis1

‎05-09-2018

Back in December 2018 we released the following sample dashboard related to local law enforcement. We leveraged selectors that enabled the end user to easily filter down the dashboard to a specific time window, police division and/or crime type. With the latest April 2018 update to Operations Dashboard for ArcGIS, we’ve added the ability to drive actions from selections on charts. The following dashboard contains charts that summarize crimes by date, division, and type. The charts are configured so that when a selection is made, they apply a filter action to the layer in the map and to each of the other charts. Charts can be configured to allow end users to make single or multiple selections at once. For example, on the date-based serial chart, you can click and drag to select a range of time. By making a few selections on the charts, we can filter the dashboard to show burglaries that have occurred today in the central police division. You will also notice several other new features in this dashboard: a search map tool, a scale bar, custom text when there is no data, and an icon in the header. Try the dashboard yourself: Philadelphia Crime Dashboard - Featuring Selection on Charts. We are excited to see how you utilize these new capabilities in your own dashboards. If you are new to Operations Dashboard, here are a couple links to get you started: How to make a simple dashboard Some customer dashboards examples

‎04-11-2018

Hi Mele Koneya‌. Unfortunately, this feature had to be bumped to a future release in order to address some complexities. I apologize for the inconvenience.

‎03-21-2018

Hi François, Sorry to hear about the trouble you are having. I am unable to reproduce this issue. I tried doing a spatial filter based on selecting polygon features from a category selector and also the map. In both cases it correctly filtered the Details element. Sounds like it could be a more specific bug. I suggest you work with Esri Support on this issue. Dave

‎03-21-2018

Hi Cree Eelgrass‌, If you could provide a bit more information about your data that would be helpful. It sounds like perhaps you have a feature layer with site locations and a table layer with inspections (that has a site ID field matching the ID's on the site layer). I'd suggest you create a Serial Chart with your inspection table. Then, configure actions on the map. Under the site layer, when selection changes you want to "filter" (your action) the "serial chart" (your target). Choose your primary and foreign ID fields (source and target fields). Press done. A selection map tool will appear on your map now that you can use to select the site to filter the serial chart of inspections pertaining to that site. Hope this helps. Dave

‎03-21-2018

Hi Anders, I'm not able to fully understand how you have it configured, but I don't believe the 1000 feature limit is your problem here. The filtering is done server-side, so returning 23 features shouldn't be a problem. If you are unable to narrow down the problem more, I suggest contacting Esri support. Dave

‎03-19-2018

The ability to configure a zoom action on a category selector using Grouped Values is coming in the next release in April 2018. Enjoy.

‎02-08-2018

Hi gahill‌, Thanks for your post. This is a bug that we are working to address. Sorry about the inconvenience. Dave

‎02-08-2018

Hi Jared, Thank you for the additional details. You are right, the "last updated" text should not go past 5 minutes if that is what your refresh interval is set to on the layer (either on the layer item or the layer in the webmap). Yes, all visual elements using that layer should respect its refresh interval and update accordingly. It is difficult to diagnose what is happening without seeing how the layer, map and dashboard are configured. I recommend you reach out to Support for more hands on help if this issue persists. A few questions: 1. Are you using the layer from your map as the data source of your visual elements or using the layer item directly? 2. Are you able to share your layer/map/dashboard publicly? Please don't compromise any security protocalls, but if you able to share it I can take a closer look.

‎02-07-2018

Hi Andrew Hargreaves‌, In the Data tab, you can configure the "Sort By" property. You can sort your slices by the statistic (e.g., large to small) or by the category/slice field (e.g., alphabetically asc/desc). Your legend sorting is also controlled by this property. At this time there is not a way to apply a custom sort order.

‎02-07-2018

Hi Jared Schuckert‌, Operations Dashboard should be respecting your refresh interval defined in the webmap. To trouble shoot, could you try increasing the refresh to 0.1 minutes? Save the map, refresh the dashboard, then edit a feature's location using the Map Viewer (or wait for your data to change). You should notice the change come through in the map of Operations Dashboard within 6 seconds. If not, perhaps there is a bug. Something to note: in the Map Viewer and other apps, the layer flashes every time it refreshes. Operations dashboard uses a special technique to avoid the flashing when the layer refreshes. Hope this helps - Dave

‎02-07-2018

Hi Eric, Not at this time. However, it is on our roadmap. - Dave

‎02-07-2018

Hi BiH Admin‌, Sorry to hear about your trouble with this. It is a bug (that we have logged). As a work-around for now, you can 'tab-through' the dropdowns in the Configure Actions dialog. Or, you can use a different browser. Operations Dashboard is supported on Firefox (and other modern browsers) and should run fine. That said, it performs best on Google Chrome. Dave

‎02-07-2018

Hi Marie-Louise Labuschagne‌, Sorry to hear about your frustration. Were you able to get it working by redoing the configuration of the filter action and targets? It is possible that it was due to a change made to a setting somewhere that impacted the action/target definitions, causing them to reset. Or, it could simply be a bug. I haven't been able to reproduce it. Any tips would be appreciated. Dave

‎02-07-2018

Hi Luke Sussex‌, Thanks for the question and details about your use case. Unfortunately, at this time there is not a way to include null values from a number selector (when applying a filter action to another element). This is a good enhancement idea, however. I will bring it to the team for consideration. Dave

‎01-18-2018

Hi Mike Onzay‌, That is one great looking indicator. If I understand you correctly, I think you can use a Date Selector. You can define options for Last Week, Last Quarter, etc. and then add a filter action and target the indicator's Value and Reference. You can define time-based filters such as "is this week", "is within the last 24 hours", etc. In the following screenshots I show an example of this. Please let me know if this is what you were looking for.

Online Status	Offline
Date Last Visited	‎11-10-2025 02:45 PM

My Ideas

Latest Contributions by DavidNyenhuis1

Filtering Dashboards Using Chart Selections

Re: Operations Dashboard Map Actions Does Not Zoom

Re: Details widget data not filtering when using a spatial filter

Re: How do I get dashboard to display time series data from fixed location monitoring points? What widget to use?

Re: Filtering in Operations Dashboard - 1000 feature limit?

Re: Operations Dashboard Map Actions Does Not Zoom

Re: Heat map style will not update based on date selector

Re: Operations dashboard not refreshing the feature

Re: Slice Label ReOrdering?

Re: Operations dashboard not refreshing the feature

Re: Try some dashboards

Re: Operations Dashboard - an issue with vertical slider (Mozzila Firefox)

Re: Date selector with Range drops the Actions like Filter the List when a range is selected

Re: Show null values in a number selector (operations dashboard)

Re: Would it be possible to group different selectors?

Re: esriFieldTypeDate in Data Expression in Dashbo...

Re: How Did They Make That Dashboard?

Re: How Did They Make That Dashboard?

Re: ArcGIS Dashboard Using Arcade to union two dat...

Re: Arcade - How to use a date field with a dictio...