|
POST
|
hey, I know in the past I have risked corrupting my ESRI Enterprise Geodatabase as I have added/removed tables using SQL, this was a hard learned lesson as I didnt know there were references to these tables, in other tables (table registry etc). When it comes to adding or dropping fields, can I do this using SQL rather than using the arcpy or geoprocessing tools? I am finding my map services are creating locks on my datasets, and the tools fail to run. I know in the past if I use SQL this will bypass the locks and fields can be added/removed with no issues, but I am now fearful that as this is an ESRI database, could this have knock on effects that come back to bite me later. Any thoughts with this?
... View more
10-15-2019
11:10 PM
|
0
|
3
|
2954
|
|
POST
|
Hey, I have a user who has reported that when they try to add a photo to a survey form, the camera page opens, but never finishes loading. They have sent me this screenshot of the screen that opens when they click the camera icon within the survey: They open the camera directly from Survey123, and it sits in this fashion with that icon in the centre spinning indefinitely. I have confirmed their camera does indeed work if they were to just use the native iPhone app, it works fine as a standalone camera. I have also used the same users phone to try to attach a photo which was taken using the native iphone app, and use the browse button, select the photo from camera roll, and this is the end result: you can see that the photo is referenced, but there is no preview of any photo within the survey123 form, but there is a preview when scrolling through the camera roll. When this form is submitted, once again it can be found on the server sans photo, all other form information is submitted no worries. I have tried taking photos in both HEIC format, and JPEG, this has no effect. I have tried using my own iphone 7 (same model as the other user) and mine works fine, no issues at all. Also tested on Android Phone I then created a brand new survey123 survey with a single item, this is a camera item, and the exact same issue happens for this one user, and not to me, so it does not seem to be survey specific, but very phone specific. Has anyone come across this, and possibly found a solution?
... View more
10-15-2019
10:21 PM
|
1
|
6
|
3793
|
|
POST
|
Just to elaborate on my above post, I think I am doing something incorrect between step 8 through 10, as my bearings do not seem to look correct, this is how things are looking at step 11. I am thinking I am not understanding how the Note in the screenshot you can see the actual data being contained in the tables along the way. Anything stick out as being incorrect? These are the settings used: 8. 9. I right clicked the column headers in the attribute table, and calculated geometries for x and y fields: 10. Right clicked on the Step8 Point table, and exported table (not feature class), this resulted in no geometry being created in step 11, so I re-run this step but created a feature class instead of table, and that is how I was able to create the linework in my original screenshot, albeit not pointing in the direction expected, I got close! 11. Bearing Distance to Line tool, you mention this is to be run twice, using each of the bearing fields, but I only have a single field, can you please elaborate how to get the second? I feel like I am getting very close, then I hit another hurdle! I greatly appreciate you time, Cheers
... View more
09-16-2019
07:46 PM
|
0
|
3
|
6018
|
|
POST
|
Hey Richard Fairhurst Just want to clarify step 10: 10. Export the table view to create a new table that has the Route ID (road casing FID), X, Y, offset, angle and complimentary angle values. So am I right clicking, export to geodatabase table the points feature class created at step 10? This feature class contains all the fields you mentioned. I am just confirming this output should be a table, not a feature class? Thanks
... View more
09-16-2019
05:26 PM
|
0
|
5
|
6018
|
|
POST
|
Hi Richard Fairhurst, thanks again for your help with this. I am now in territory I have not been before, and with step 8 you say 'create route event', I am unsure how to populate the tool: 8. Use the Create Route Event Layer tool with the exported table to create a point layer, using both the angle and the compliment angle options. I am now unsure as to what data goes into which parameter in the below options, can you please assist?
... View more
09-11-2019
08:27 PM
|
0
|
0
|
6018
|
|
POST
|
Just an update I am back on this project again, and I was able to get step 4 to work in ArcMap, but pro kept failing as per my previous post. I will keep you posted. Cheers
... View more
09-08-2019
04:36 PM
|
0
|
0
|
6018
|
|
POST
|
Hey Ben Baker, I have looked into this previously but could not work it out myself. I am unsure if a rename is possible at this point. Hopefully someone else sees this and can help us both! Cheers
... View more
09-04-2019
10:53 PM
|
0
|
3
|
5549
|
|
POST
|
Hey Richard Fairhurst, Thanks for the fantastic guide! I am working my way through it now. I have just now hit a hurdle, I have created the route at step 3 no worries: I then try to add the field to the resultant table as instructed in step 4, but when I try to modify the table I get this error: I am guessing the resultant table is not a 'normal' table? (note: I have not played much with routes before). Do I need to do something special? Cheers
... View more
08-11-2019
11:33 PM
|
0
|
3
|
6018
|
|
POST
|
I have been asked to define the road widths of all our road reserves, and I am wondering if this is a simple process using the correct tools... I have a road centreline POLYLINE layer, this is a single polyline that runs the entire length of any road. I also have a road segment POLYGON layer, this is broken into road segments for asset management purposes. Just to give you an indication, this is how they look, centrelines are dashed blue, and outlines red solid: I know there will be some strange outputs no matter how I carry this out (court bowls etc), but as a starting point if I could use my road centreline, find perpendicular at the midpoint of the road centreline, and then extend outward until I intersect with a road outline, and return that distance, this would get me a result in the majority of cases. Any rough ideas on how this could be achieved? Cheers
... View more
08-11-2019
05:01 PM
|
0
|
13
|
7882
|
|
POST
|
Hey James, So I got to the bottom of it, what was happening is the user was taking the photo with the camera on the ipad, then opening up survey123 and filling in the survey, and instead of taking a photo within the app, they were selecting the photo from the ipads camera reel, and pressing submit... I have since tested myself and the photos all come through the correct way up, regardless as to weather screen rotation was locked/unlocked. Thanks for your suggestion.
... View more
06-19-2019
09:37 PM
|
0
|
0
|
2559
|
|
POST
|
I have a search setup in my web app, I would like users to be able to navigate the map using this, but I dont want the users to be presented with any information about the street they searched. Is there any way we can disable the 'search result' window from appearing (and this will hopefully disable the highlight of the street from showing)?
... View more
06-19-2019
07:39 PM
|
0
|
1
|
811
|
|
POST
|
Hey, I have a web app setup, and there are two layers which I would like the users to be able to search, Water Main and Road Name. At the bottom of the Search Options panel, there is an option to set 'select default search', which I assume means that whatever is set here, will be the default search option in the search window on my web app. So I save this, and launch the page. But no matter how many times I have tried this, the Water Main search is ALWAYS the default option presented to me. I expect to see 'smith street' here, but instead I see AssetID: I am wondering if: Have I made an incorrect assumption? Is this not what this setting does? Is this a bug in the matrix, and this happens to everyone? Have I set this up incorrectly? My full workflow is below as a GIF (click to enlarge), any assistance or pointers would be greatly appreciated. Thanks for your time.
... View more
06-19-2019
07:09 PM
|
0
|
0
|
808
|
|
POST
|
I am wondering if there has been any progress with this Ismael Chivite? I have just started a new question here, asking the same thing - https://community.esri.com/thread/235494-survey123-image-questions-photos-are-all-rotated-90-degree Cheers
... View more
06-17-2019
08:57 PM
|
0
|
0
|
5152
|
|
POST
|
Hey, We have users with ipads completing surveys on the Survey123 app, and every single photo that they take seem to be rotated -90 degrees. I understand this is because they are holding the ipad portrait, but my question is, can we get the photos to auto rotate? Is this a limitation with iphones, or the app? Has anyone else had this issue? Here is an example survey result.
... View more
06-17-2019
08:53 PM
|
0
|
2
|
2831
|
|
POST
|
I have several lines, rectangles etc in a layout within ArcGIS Pro 2.3.3 and I am setting up a new layout in the same project. In my original layout all the units were in mm, I don't recall changing any settings to make this happen, I assume these were how the units are to begin with. I am now creating another layout, but when i customize my elements in this new layout the settings are all in cm, and I have no idea why. I am wanting to make these uniform, and use mm in both. I found in the settings this page, I have set to mm, but this has had no effect: Can someone please point me to the setting I am looking for?? Cheers
... View more
06-16-2019
07:40 PM
|
0
|
2
|
2673
|
| Title | Kudos | Posted |
|---|---|---|
| 1 | 10-17-2018 08:51 PM | |
| 1 | 09-23-2018 07:38 PM | |
| 1 | 04-08-2019 10:05 PM | |
| 1 | 02-03-2019 03:06 PM | |
| 1 | 12-20-2019 07:16 PM |
| Online Status |
Offline
|
| Date Last Visited |
11-11-2020
02:24 AM
|