Latest Contributions by Trippetoe

‎05-01-2024

Hey @RobertAnderson3 . That is another cool idea. I didn't know those properties were available. Since the survey will likely be part of a StoryMap, it seems like we wont have access to deviceId, deviceModel, and OS. And my thinking is that 'userAgent' is specific to the browser, so we could group together all Chrome macOS users' answers (for example), but that would be as fine-grained as we could get with the cross-tabs. But that's closer to what we are imagining than we were yesterday.

‎05-01-2024

That is a fabulous idea. Thank you for sharing it! I'm also intrigued by the suggestion from @JanelleGuzman for a common 'connector' across multiple surveys. I could see something like an auto-created guid when a user opens the storymap, or something along those lines, which gets submitted when each 'child' survey is submitted - a sort of session id if you will. But, i've got no good ideas yet on how that might be done. Do you?

‎04-30-2024

I think of myself as a somewhat reasonable person, so i'm good with 'no' as the official answer. Here's a high level description of what we're wanting to do. I'm working with some park planners as they develop multiple options for improving an existing park. The planners want to use Survey123 to get citizen's feedback on various aspects of the multiple plans. And there are lots of 'aspects' to the options. We are imagining a scrolling story map where each 'aspect' of a the design option gets a full text description, graphics, images etc, etc, and then place a survey at the end of that aspect that asks multiple questions to get citizens feedback, rankings, etc. specific to that aspect. And then citizens can scroll down to the next aspect, get descirptions, images, etc and a survey at the end of that section .... and so on. Each 'aspect' would have its own Page in the survey. that's why i was wondering if we could specify what page to open the survey on. We want to keep all the answers in a single survey to support "cross-tab" analyses if possible Maybe this is starting to drag on too long. Anyway, i'd love hear ideas about how we could pull off something like this. Thank you for sharing your time and knowledge.

‎04-30-2024

Hello @abureaux . Thanks for your reply. By any chance is there a 'Long Answer' that can get to 'Yes'. Or is 'No' both the short and long answer?

‎04-30-2024

Hi @JanelleGuzman There is no survey to share yet. We are still at the 'on the drawing board' stage at this time.

‎04-29-2024

Hello. Is it possible to open a web-based survey to a specific page (like page 2 of 4, or some such) - perhaps from a URL parameter maybe? I saw a list of parameters here, but none of them looked promising. Are there other options for opening the survey to a specific page? Thank you.

‎04-11-2024

@EarlMedina Thanks again for replying. I really appreciate you sharing your time and expertise. I may have stumbled over the problem and solution myself. I have two candidates: I noticed that in the config file i'm using to set various parameters like AGOL itemid, file name, etc, the file name did not include the ".csv" extension. So, i included that info. And, I noticed that i had deleted the original source csv from AGOL. I think i read somewhere in the docs that the source csv file needed to be present for the overwrite to work (or something like that). So i deleted the hosted feature service, reuploaded the original csv file and published that. Since doing those two things, the code is working as expected with the service data being updated. Regardless of what the source of the problem was, I wonder why the overwrite() method returned success = True when the update didn't work. I guess that's a question for another thread. Thanks again for your help.

‎04-11-2024

Hello @EarlMedina . Thanks for replying. Correct, the schema is not changing. What JSON could be the problem - the service's JSON? I'll poke around on community for some truncate/append examples and give those a whirl.

‎04-10-2024

Hi There. I am trying to use the ArcGIS python API to overwrite an AGOL hosted feature table that i own. The process seems to work, i.e. the FeatureLayerCollection.manager.overwrite() method returns {'success': True}, but the data in the AGOL hosted table are not updated. The items detail page of the hosted feature table indicates that it was updated at the same time as my log file indicates that the overwrite() operation completed. So all indications are that the overwrite worked, except for the data. (from Item Details page) (from my log file) If i update the hosted table via the AGOL UI, the process works as expected - the new data are present in the table. The table was originally created by publishing a csv file to AGOL. The csv file i am using to overwrite the existing hosted table has the same name and schema as the original file. my conda environment is using arcgis v2.1.0.2. Any ideas what's going on? files_to_update = json.loads((settings.SURVEY_LOOKUP_TABLES_TO_UPDATE).replace('\n','')) for file in files_to_update: lookup_file = update_survey_lookup_file(settings.SURVEY_LOOKUP_FILES_LOCAL_SOURCE, file) lookup_table = gis.content.get(file['agolItemId']) lookup_collection = FeatureLayerCollection.fromitem(lookup_table) LOGGER.debug("Start to overwrite AGOL table with " + lookup_file) response = lookup_collection.manager.overwrite(lookup_file) LOGGER.debug("the response from the overwrite operation: " + str(response)) LOGGER.debug("Done with overwrite of AGOL table with " + lookup_file) lookup_table.update(item_properties = {"title" : file['agolTitle']})

‎04-09-2024

Setting Tab order seems like basic functionality that really should be present whether the survey is built in Connect or the Web. Here's my use case: Two of the questions in my survey are: Wind Speed (number) and Wind Direction (select_one). The Wind Direction question follows the Wind Speed question. It is 'relevant' and appears if the Wind Speed value > 0 (there's no need for Wind Direction if there's no wind). The Wind Direction question is required when its relevant. The 'problem' i'm having is that the form's Tab Order doesn't seem to include the Wind Direction question. For example, when a user enters a value >0 in the Wind Speed question and hits 'enter' (the blue arrow button on the number pad that appears for numeric questions), the tab skips right over the Wind Direction question. A user has to navigate back to the Wind Direction question. It's not a tragic situation for sure, but it is annoying for the users. Ideally, hitting the blue button on the Wind Speed question would tab to the Wind Direction question and pop open the drop down list of Wind Direction values.

‎04-08-2024

Two of the questions in my survey are: Wind Speed (number) and Wind Direction (select_one). The Wind Direction question follows the Wind Speed question. It is 'relevant' and appears if the Wind Speed value > 0. The Wind Direction question is required when its relevant. The 'problem' i'm having is that the form's Tab Order doesn't seem to include the Wind Direction question. For example, when a user enters a value >0 in the Wind Speed question and hits 'enter' (the blue arrow button on the number pad that appears for numeric questions), the tab skips right over the Wind Direction question. A user has to navigate back to the Wind Direction question. It's not a tragic situation for sure, but it is annoying for the users. Is there a way to force a Tab stop for a relevant question? Ideally, hitting the blue button on the Wind Speed question would tab to the Wind Direction question and pop open the drop down list of Wind Direction values. Thank you

‎03-14-2024

At the Dev Summit this week, all the Survey123 folks were super helpful. For this particular issue Zachary Sutherby ( @ZacharySutherby ) suggested the following which is working exactly as i needed (sorry for the screen shot but that's what i got for now).....

‎03-10-2024

Hey @abureaux . Thank you for your suggestion. That's a clever workaround that i think will get mostly what i was after.

‎03-08-2024

Hello @abureaux . Thank you for sharing your ideas. If i understand your suggestion correctly, in my case it doesn't seem feasible to do a calculate per option. My list of options are coming from an AGOL standalone table via the 'autocomplete search()' function, the options are dynamic with not infrequent changes to the underlying list of options, and there are upwards of 50 or so options. To me the suggested approach doesn't seem practical for the use case. Have you seen any additional documentation from Esri (or from other users) that gives details on how to construct a more complex 'where' clause when doing an 'autocomplete search()'?

‎03-07-2024

Hello. I'm using Survey123 Connect to build a survey where i ask users to select their top 3 preferences from a group of items. Each 'preference' question is a separate question, i.e. 'Choose your top preference', then 'Choose your second preference', etc. The 'group of items' is populated using the `autocomplete search()` functionality to return data from an AGOL hosted table. My goal is to prevent a user from selecting the same item in subsequent preference selections by removing the previously selected value(s) from the 'group of items'. For example, i don't want a user selecting, say Ice Cream as their favorite food in the 3 questions asking for their top 3 food types (although that would be my preferred selections!). So, if they chose Ice Cream in the first question, Ice Cream would not appear in the 'group of items' for the second and third questions. Esri docs say that for a nonspatial table, i can use 'contains' or 'matches' as search types. But, Is there a way to say 'does not match' or 'does not contain'. I tried putting a '!' in front of 'matches' but that didn't work And for the filter option its not clear how the filterText parameter should be formatted for a 'negative' filter. I have the same goal: to filter records so that rows where filterColumn does not equal a particular filterText value. Any suggestions?

Online Status	Offline
Date Last Visited	3 weeks ago

My Ideas

Latest Contributions by Trippetoe

Re: Is it possible to open a survey to a specific page via URL parameters

Re: Is it possible to open a survey to a specific page via URL parameters

Re: Is it possible to open a survey to a specific page via URL parameters

Re: Is it possible to open a survey to a specific page via URL parameters

Re: Is it possible to open a survey to a specific page via URL parameters

Is it possible to open a survey to a specific page via URL parameters

Re: FeatureLayerCollection manager overwrite() not working as expected

Re: FeatureLayerCollection manager overwrite() not working as expected

FeatureLayerCollection manager overwrite() not working as expected

Re: Add Tab Order to Survey123

Set tab order for relevant select_one questions

Re: Is there a way to do a 'negative' search \ filter with autocomplete search()?

Re: Is there a way to do a 'negative' search \ filter with autocomplete search()?

Re: Is there a way to do a 'negative' search \ filter with autocomplete search()?

Is there a way to do a 'negative' search \ filter with autocomplete search()?

FeatureLayerCollection.replicas.create always retu...

Add more fine grained control of colors in Customi...

Is sending data to repeats supported in Survey Wid...

Re: Category links open results page at the page f...

Re: AGOL hosted feature service just started refus...