POST
|
Two of the questions in my survey are: Wind Speed (number) and Wind Direction (select_one). The Wind Direction question follows the Wind Speed question. It is 'relevant' and appears if the Wind Speed value > 0. The Wind Direction question is required when its relevant. The 'problem' i'm having is that the form's Tab Order doesn't seem to include the Wind Direction question. For example, when a user enters a value >0 in the Wind Speed question and hits 'enter' (the blue arrow button on the number pad that appears for numeric questions), the tab skips right over the Wind Direction question. A user has to navigate back to the Wind Direction question. It's not a tragic situation for sure, but it is annoying for the users. Is there a way to force a Tab stop for a relevant question? Ideally, hitting the blue button on the Wind Speed question would tab to the Wind Direction question and pop open the drop down list of Wind Direction values. Thank you
... View more
04-08-2024
05:38 PM
|
0
|
1
|
201
|
POST
|
At the Dev Summit this week, all the Survey123 folks were super helpful. For this particular issue Zachary Sutherby ( @ZacharySutherby ) suggested the following which is working exactly as i needed (sorry for the screen shot but that's what i got for now).....
... View more
03-14-2024
09:55 PM
|
0
|
1
|
316
|
POST
|
Hey @abureaux . Thank you for your suggestion. That's a clever workaround that i think will get mostly what i was after.
... View more
03-10-2024
04:23 PM
|
0
|
0
|
345
|
POST
|
Hello @abureaux . Thank you for sharing your ideas. If i understand your suggestion correctly, in my case it doesn't seem feasible to do a calculate per option. My list of options are coming from an AGOL standalone table via the 'autocomplete search()' function, the options are dynamic with not infrequent changes to the underlying list of options, and there are upwards of 50 or so options. To me the suggested approach doesn't seem practical for the use case. Have you seen any additional documentation from Esri (or from other users) that gives details on how to construct a more complex 'where' clause when doing an 'autocomplete search()'?
... View more
03-08-2024
09:51 AM
|
0
|
3
|
366
|
POST
|
Hello. I'm using Survey123 Connect to build a survey where i ask users to select their top 3 preferences from a group of items. Each 'preference' question is a separate question, i.e. 'Choose your top preference', then 'Choose your second preference', etc. The 'group of items' is populated using the `autocomplete search()` functionality to return data from an AGOL hosted table. My goal is to prevent a user from selecting the same item in subsequent preference selections by removing the previously selected value(s) from the 'group of items'. For example, i don't want a user selecting, say Ice Cream as their favorite food in the 3 questions asking for their top 3 food types (although that would be my preferred selections!). So, if they chose Ice Cream in the first question, Ice Cream would not appear in the 'group of items' for the second and third questions. Esri docs say that for a nonspatial table, i can use 'contains' or 'matches' as search types. But, Is there a way to say 'does not match' or 'does not contain'. I tried putting a '!' in front of 'matches' but that didn't work And for the filter option its not clear how the filterText parameter should be formatted for a 'negative' filter. I have the same goal: to filter records so that rows where filterColumn does not equal a particular filterText value. Any suggestions?
... View more
03-07-2024
11:05 AM
|
0
|
6
|
407
|
POST
|
Hey @DougBrowning Thank you for your suggestions. When i shortened the field name that is referenced in the choices worksheet, i was able to republish the survey without that error. That approach seems much more simple that expanding the field size in the feature service. we've got many years of data in the service and i don't want to recreate/republish all of that. It seems like maybe the Esri team chould rethink either how the search() functionality is setup/configured within the xls form or reconsider the form validation process when search() is being used. It's reasonable that the length of a field name could be longer than the values going into the field. Or maybe its just me 😉
... View more
01-19-2024
01:50 PM
|
0
|
1
|
473
|
POST
|
i think you are on to something. Yes, the question is a select_one. I am using the 'search()' functionality to populate the field based on input from a previous question. And the 'search' column name used that gets set in the choices worksheet is longer than 10 characters. I'm gonna try shortening that to see what happens.
... View more
01-19-2024
12:56 PM
|
0
|
3
|
484
|
POST
|
I have a pre-existing survey that I've been using Survey Connect (v3.17.55) for updating . When i attempted to 'Publish' the survey with the update, I got an error message that one field length is too short (see attached screen shot). Because its a dev version of the survey, I opted to republish the survey. This resulted in creation of a new AGOL feature service to support the survey. The very next time I Published the survey, i got the same error message. Again i opted to republish. Again, the next time i tried to publish, i got the same error message. I seem stuck in some dark magic circle. Can you help me get out of that circle?
... View more
01-19-2024
11:38 AM
|
0
|
5
|
557
|
POST
|
Using a Calculate as the value of the searchText worked perfectly. I didn't have as much good look changing out the autocomplete appearance for minimal. The app behaved the same regardless of that setting. But I'm calling this a victory for now and moving on to the next hurdle. Thanks again for your help. It is super-appreciated!
... View more
01-18-2024
11:04 AM
|
1
|
0
|
576
|
POST
|
Hi @abureaux It has been a fun adventure learning more about the search() functionality. Thank you for pointing me in that direction. Broadly speaking, I think your suggestion will work fine. I am seeing two bits of functionality, though, that are a bit nettlesome. When the survey loads and before any Company is selected, all possible Work Order Numbers are available in the dropdown. Once a company is selected, the list is filtered as expected, but i'm a bit bothered by having all work order numbers present prior to selection. I certainly could hide the Work Order question until a Company is selected, but the question is 'foundational' to the survey and i'm a bit hesitant to hide/display the question depending on the state of the Company selection If i select a company, then make a Work Order Number selection and then clear the Company selection, the selected Work Order Number remains visible. Once i make a new Company selection, the selected work order number is cleared and all is as expected. I would expect the Work Order Number to be cleared if the Company selection is cleared Those two items aren't enough to prevent me from using the Search() functionality, but just troublesome enough to slightly irk me. Do you have any suggestions for making the Work Order Number list blank until, and only if, a company name is selected?
... View more
01-17-2024
04:03 PM
|
0
|
2
|
613
|
POST
|
Hey @abureaux Based on your suggestions I'm gonna take a deeper dive into this, but before i got lost in that I wanted to Thank You for your sharing your time and knowledge. I really appreciate it. I'll get back to you later with results from my fiddling around.
... View more
01-17-2024
10:21 AM
|
0
|
0
|
636
|
POST
|
Hi @abureaux Thanks for your suggestion, but it doesn't work as i need it to. It seems that your formula detects whether or not a value has been selected from the Work Order Number question. I need a formula that can detect whether there are any options available in the Work Order number question. Its possible that there are no options in the Work Order Number questions based on the filter value in place because of the previous question's (Company) answer (hopefully that makes sense!)
... View more
01-16-2024
02:46 PM
|
0
|
6
|
673
|
POST
|
Hello. I'm using Survey123 Connect to create survey that contains a 'cascading select'. A contractor must first select their company name and then select an active Work Order Number. The Work Order Number options are filtered by the company name. There may be cases where a company does not have any active Work Order numbers. In those cases, i'd like to display a note that gives some details on who to contact, etc. I'm imagining that the 'relevant' filter for the note would be something like 'count number of options in work order number question = 0'. So far, i can't figure out how to do that in Survey123 Connect. Does a function like that exist? thank you.
... View more
01-16-2024
10:33 AM
|
0
|
8
|
700
|
IDEA
|
In the results area of the Near Me widget, default text is displayed which reads 'Closest Address' and then displays the location from which the search was initiated - not the closest address. The phrase 'closest address' is misleading, well actually its just wrong - it is not the closest / nearest address. The confusion created by that phrase has lead my client to remove the tool from their app. In the simplest case, the 'Closest Address' text is hidden or re-written to correctly say something about the location being the center of the search radius. In the best case, the text is configurable.
... View more
11-17-2023
11:16 AM
|
7
|
7
|
674
|
POST
|
Perfect. Thank you! A minor note is that to see the changes in Experience Builder, i had to close and re-open the experience to see the changes in the map.
... View more
11-15-2023
12:02 PM
|
0
|
0
|
383
|
Title | Kudos | Posted |
---|---|---|
1 | 4 weeks ago | |
1 | 04-29-2024 05:34 PM | |
1 | 04-20-2022 10:18 AM | |
1 | 01-18-2024 11:04 AM | |
1 | 01-16-2020 04:14 PM |
Online Status |
Offline
|
Date Last Visited |
a week ago
|