Latest Contributions by Syvertson

‎03-09-2016

I might not have been clear about what I am trying to do, so I will use an example. Lets say I have a polygon layer which has all counties in the state, and I have a raster layer in which each pixel has a value range of 1-5. I would like to overlay the two and receive a table with the columns county,1,2,3,4, and 5. So for each line, I would like the county name, the area of value one in that county, the area of value 2 in the county, etc...

‎03-09-2016

I am about to create a model to do this, but before I go and do that I want to be sure whether this exists already. I need to find out the area of each pixel value from a raster within a zone from a polygon overlayed. The closest I have found to this so far is the "zonal statistics" tool in the ESRI Spatial Analyst Toolbox. Ultimately, I would like to join the table to the original polygon zone layer to add these values as attributes of the zone. Thanks in advance, Matt Syvertson [email protected]

‎02-09-2016

Thanks to everyone's assistance. I ended up opening up a tech support case, and found out that this is a known bug that is to be fixed in version 10.4. Another bug showed up when I attempted to just change the URL (Which should be able to be done) in the App editor. This bug will not save the changes. Both bugs are listed below: • BUG-000088682: When a Portal for ArcGIS site is configured to use Secure Sockets Layer (SSL) only, ArcGIS Web AppBuilder applications are created through HTTP automatically and the URL cannot be updated. This bug is marked as fixed in 10.4. • BUG-000091888: In Portal for ArcGIS 10.3.1, changes made to a web map application's URL do not persist after being saved. This bug appears to be going through the review process still. In the meantime, you can go through the workaround like we did on the phone: Browse to the item's details page through My Content. Copy the item ID from the URL. Navigate to the ArcGIS Portal content directories using the item id. For example: C:\arcgisportal\content\items\4b3a1b1a75cb495fbcb7f983624df263\esriinfo Edit the iteminfo.xml file within the esriinfo folder for that item and change the URL to include https instead of http. In Portal, you can now change the application's URL; all changes will now be saved.

‎02-09-2016

I noticed that there are no ESRI tech support or developers in this conversation yet. Any ideas on this one ESRI?

‎02-09-2016

Yes. The portal will only allow SSL. That is the problem. portal won't accept anything else, yet the app builder creates a URL without it. I tried to edit the URL and it looks like it takes it, but when I go back in, it reverts back.

‎02-09-2016

I agree. Everywhere in my portal requires https. Every page I go to is configured to display https, except the apps that are created using the method in the screen shot above. To answer a question from above, I tried to configure are "URL rewrite" in IIS, and then the portal did not function. It is possible I did it incorrectly, but I followed a post that a Microsoft professional posted on a different site. URL Rewrite for SSL redirection : The Official Microsoft IIS Forums <rule name="Force HTTPS" enabled="true"> <match url="(.*)" ignoreCase="false" /> <conditions> <add input="{HTTPS}" pattern="off" /> </conditions> <action type="Redirect" url="https://{HTTP_HOST}/{R:1}" appendQueryString="true" redirectType="Permanent" /> </rule>

‎02-09-2016

I think you guys are right IF I was doing this in a web app builder that I installed on my desktop and use the "node.js" environment to create it. But in this case, this app is created using the built-in version of app-builder in the portal. See screen shot below: I am going to try using the desktop version of web app builder, but I still need to get this to work, because I don't want to have to build all the little apps, and this is a non techie person who is doing this particular app. The process worked easy enough for him to make the map and app he needs, without getting down in the weeds. I will continue to attempt finding these files/settings on the GIS Server, but I have not yet been successful.

‎02-09-2016

Thanks Chris for your quick response. I have a CA signed Certificate and I have SSL enabled. The application works in SSL very well. I just have to manually add the "Https://" to the URL that the web appbuilder creates. So, if I find the App in the gallery, and I click on it, I get a "Forbidden" error message. Then if I add the "Https://" to the front of the URL, you can proceed.

‎02-09-2016

Hello. I have just created an application with web app builder (This is using portal, not AGOL, and using the "Create Application using Web App Builder" in the portal) Immediately we had errors saying that access was forbidden. After a day or so, I realized that the problem is that the app builder creates a URL that is not SSL, and I have my web server set to only accept SSL. The temp solution is to just add the "https://" to the URL in the address bar after it gives one that won't work. How do I get the app builder to give me a good address using https from the start. I know it must be able to be changed in the settings somewhere, but where??? Thanks. Matt Syvertson

‎10-30-2015

This is now resolved. I still do not know why the feature service that was working fine stopped working, BUT I took the same MXD file I used to create that service and created a new one. O then created a new map for the new service and shared it appropriately. The feature service is now editable.

‎10-29-2015

We have already attempted both of these things.

‎10-28-2015

{ "currentVersion": 10.31, "serviceDescription": "Service used by Water Resources to Update Site Inspections", "hasVersionedData": true, "supportsDisconnectedEditing": true, "syncEnabled": false, "supportedQueryFormats": "JSON, AMF", "maxRecordCount": 1000, "capabilities": "Create,Delete,Query,Update,Uploads,Editing", "description": "", "copyrightText": "", "spatialReference": { "wkid": 102721, "latestWkid": 102721 }, "initialExtent": { "xmin": 2784795.9737791843, "ymin": 235321.56882762923, "xmax": 2945863.6821125173, "ymax": 311233.02716096246, "spatialReference": { "wkid": 102721, "latestWkid": 102721 } }, "fullExtent": { "xmin": 2782280.6834204644, "ymin": 134916.41724413633, "xmax": 2963682.2011941373, "ymax": 507381.2018406391, "spatialReference": { "wkid": 102721, "latestWkid": 102721 } }, "allowGeometryUpdates": true, "units": "esriFeet", "documentInfo": { "Title": "", "Author": "", "Comments": "", "Subject": "", "Category": "", "Keywords": "Water Resources,Site Inspections,Drains" }, "layers": [ { "id": 0, "name": "Inspection Sites" }, { "id": 1, "name": "Vegetation" } ], "tables": [], "enableZDefaults": false }

‎10-28-2015

Hello. Thanks for taking an interest in our problem. Almost all of the features are added and edited by the same person, so I don't think that is it. But here is a look at the feature properties (I don't see that option):

‎10-28-2015

Has anyone had any problems with version 10.3.5 of Collector (released on October 18th)? Since the update we have not had the ability to edit existing features. We are using a portal based service with feature access. It will allow us to add new points, but not edit existing points. We have tried everything but are stumped. In the portal we are able to edit and add points as always, so permissions is not the issue. Below you can see a screen shot. When you select a point, then click on the upper right button it gives this menu. There used to be an option to edit it here, but it does not show up any more. Help!!!

‎08-14-2015

Thank you Amy!

Online Status	Offline
Date Last Visited	‎01-13-2026 02:57 PM

My Ideas

Latest Contributions by Syvertson

Re: Is there a tool already created that will calculate the total area for each pixel value in a raster that falls within each zone in an overlayed poygon?

Is there a tool already created that will calculate the total area for each pixel value in a raster that falls within each zone in an overlayed poygon?

Re: SSL in Web App Builder

Re: SSL in Web App Builder

Re: SSL in Web App Builder

Re: SSL in Web App Builder

Re: SSL in Web App Builder

Re: SSL in Web App Builder

SSL in Web App Builder

Re: New IOS Collector App Problems

Re: New IOS Collector App Problems

Re: New IOS Collector App Problems

Re: New IOS Collector App Problems

New IOS Collector App Problems

Re: ArcGIS 10.3.1 Parcel Fabric General Maintenance Patch Now Available

Re: Enterprise Basemap with High Resolution Imager...

Query data using URL Parameters

Create "Zip" file in Model Builder

Re: Move Parcel Fabric

Re: Move Parcel Fabric