Latest Contributions by AdamRepsher

Has anyone had any luck with the "Locations" entry in the Twitter, Receive Tweets input setup? I have had the Twitter input working.  Every time I place a set of bounding coordinates in that box (even the ones given in the example), the server will talk with Twitter servers for a few seconds and then stops.  I then cannot just delete that set of coordinates because the next time I start the input, it fails the same way.  I either have to copy the last input and rename it, or start from scratch with a new Twitter Input. Any thoughts? --Adam ... View more

Is anyone having any problems with Registered ArcGIS Servers?  I was troubleshooting another issue when I saw this occur.  Within 30 minutes, my logs filled with an error repeated 23 times within the same second - every 2 or three minutes. When the error was occuring, I would go to the Data Stores page on the GEP Manager site and see that ArcGIS Server was not validated.  My Feature Service Outputs were still working, but when I opened the edit window on any of them, the page did not display any Service Name or Layer.  The drop-downs were empty. After restart, everything concerning that issue appears to be fine. Should I be submitting bug tickets with this and the other issues that I am posting here about? Thanks, --Adam Here is one entry in the log that I think is attached to this issue: com.esri.ges.manager.stream.internal.OutboundTransportProxy Failed to set Transport (com.esri.ges.transport.outbound/FeatureService/10.2.0) properties:     com.esri.ges.core.validation.ValidationException: com.esri.ges.transport.featureService.FeatureServiceOutboundTransport properties validation failed: Mandatory property 'datastore' is not set. Mandatory property 'serviceName' is not set.        at com.esri.ges.core.property.PropertyCollectionBase.validate(PropertyCollectionBase.java:184)        at com.esri.ges.manager.stream.internal.OutboundTransportProxy.initTransport(OutboundTransportProxy.java:68)        at com.esri.ges.manager.stream.internal.TransportProxyBase.installTransport(TransportProxyBase.java:359)        at com.esri.ges.manager.stream.internal.TransportProxyBase.setTransportUri(TransportProxyBase.java:70)        at com.esri.ges.manager.stream.internal.StreamBase.setTransportUri(StreamBase.java:200)        at com.esri.ges.manager.stream.internal.StreamManagerImpl.newStream(StreamManagerImpl.java:196)        at com.esri.ges.manager.stream.internal.StreamManagerImpl.queueStream(StreamManagerImpl.java:307)        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)[:1.7.0_17]        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)[:1.7.0_17]        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)[:1.7.0_17]        at java.lang.reflect.Method.invoke(Method.java:601)[:1.7.0_17]        at org.apache.aries.proxy.impl.ProxyHandler$1.invoke(ProxyHandler.java:50)        at org.apache.aries.proxy.impl.DefaultWrapper.invoke(DefaultWrapper.java:31)        at org.apache.aries.proxy.impl.ProxyHandler.invoke(ProxyHandler.java:78)        at com.sun.proxy.$Proxy94.queueStream(Unknown Source)        at com.esri.ges.persistence.file.stream.FileStreamDAO.register(FileStreamDAO.java:131)        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)[:1.7.0_17]        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)[:1.7.0_17]        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)[:1.7.0_17]        at java.lang.reflect.Method.invoke(Method.java:601)[:1.7.0_17]        at org.apache.aries.blueprint.utils.ReflectionUtils.invoke(ReflectionUtils.java:225)[15:org.apache.aries.blueprint:0.3.2]        at org.apache.aries.blueprint.container.BeanRecipe.invoke(BeanRecipe.java:838)[15:org.apache.aries.blueprint:0.3.2]        at org.apache.aries.blueprint.container.BeanRecipe.runBeanProcInit(BeanRecipe.java:638)[15:org.apache.aries.blueprint:0.3.2]        at org.apache.aries.blueprint.container.BeanRecipe.internalCreate(BeanRecipe.java:726)[15:org.apache.aries.blueprint:0.3.2]        at org.apache.aries.blueprint.di.AbstractRecipe.create(AbstractRecipe.java:64)[15:org.apache.aries.blueprint:0.3.2]        at org.apache.aries.blueprint.container.BlueprintRepository.createInstances(BlueprintRepository.java:219)[15:org.apache.aries.blueprint:0.3.2]        at org.apache.aries.blueprint.container.BlueprintRepository.createAll(BlueprintRepository.java:147)[15:org.apache.aries.blueprint:0.3.2]        at org.apache.aries.blueprint.container.BlueprintContainerImpl.instantiateEagerComponents(BlueprintContainerImpl.java:631)[15:org.apache.aries.blueprint:0.3.2]        at org.apache.aries.blueprint.container.BlueprintContainerImpl.doRun(BlueprintContainerImpl.java:337)[15:org.apache.aries.blueprint:0.3.2]        at org.apache.aries.blueprint.container.BlueprintContainerImpl.run(BlueprintContainerImpl.java:230)[15:org.apache.aries.blueprint:0.3.2]        at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:471)[:1.7.0_17]        at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:334)[:1.7.0_17]        at java.util.concurrent.FutureTask.run(FutureTask.java:166)[:1.7.0_17]        at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.access$201(ScheduledThreadPoolExecutor.java:178)[:1.7.0_17]        at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.run(ScheduledThreadPoolExecutor.java:292)[:1.7.0_17]        at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1145)[:1.7.0_17]        at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615)[:1.7.0_17]        at java.lang.Thread.run(Thread.java:722)[:1.7.0_17] ... View more

I have a GEP service that uses a few Field Enrichers.  Those Field enrichers consistently "turn off" after midnight local time.  I see the results in my CSV output.  That output is set to roll over daily to a new file. Before midnight, the Message Definition field in the CSV output file is showing the message def name of the last field enricher, and I am getting all fields.  After midnight, and the creation of a new daily CSV, the Message Definition field is now showing the name of the original message def and the file does not contain the data from the file enrichers. I took a few shots of the process.... The Service:[ATTACH=CONFIG]26880[/ATTACH] The input is a simple "Receive text from a TCP socket." The next step is a field calculator.  Since my feed's time data is not properly ISO 8601 tagged as UTC (Z), I must convert it to local time so that GEP can properly process it: [ATTACH=CONFIG]26881[/ATTACH] The first Field Enricher is simply adding additional (semi-static) attributes from a CSV file: [ATTACH=CONFIG]26882[/ATTACH] The second Field Enricher is converting a coded value to a human-understood name.  These do change often over the life of the track: [ATTACH=CONFIG]26883[/ATTACH] Looking at the Service picture, after the Field Enrichers - from top to bottom: A specific vehicle's track (filter for one specific IP) is being captured and dumped into a CSV file and rolled over daily (AVL-GoldExp-CSV). The enriched feed with no filters is dumped into a CSV file and rolled over daily (out_EnrichSRND_csv) The enriched feed with no filters is dumped into an "Update a Feature" output with max feature age of 1 min. When a vehicle passes within 200m of one of our radio system's tower sites:[ATTACH=CONFIG]26884[/ATTACH] It is tagged with the name of the tower with a GeoTagger:  (sorry, I ran out of pictures that I could add) ...and dumped into an "Update a Feature" output, with max feature age of 10 min. (AVL-SiteProx100-FS-out) ...and dumped into a CSV file that is rolled over daily. (AVL_SiteProx_file-out) [/HR]Please forgive the naming conventions.  A lot of the elements are remaining from the initial attempt at getting this all working - two versions of the Beta ago. I am wondering if the CSV file rollover has anything to do with the problems.  Anyone have any ideas or similar experiences? Thanks, --Adam ... View more

I am finding that the "Update a Feature" output settings, specifically "Update Interval (milliseconds)" is not in milliseconds.  It is seconds. Can ANYONE else confirm this for me?  I am running Build# 10.2.0.1154 Thanks, --Adam ... View more

Stupid question: Will the deletion of a user in the Identity store have any impact on the inputs, outputs or services that the user created? Thanks, --Adam ... View more

**The Portal for ArcGIS extension software is included with ArcGIS for Server Advanced (Enterprise or Workgroup) and is licensed and priced based on the number of named users. Specifically with Portal for ArcGIS deployed locally, what does the statement, "is licensed and priced based on the number of named users" mean? Thank you, --Adam ... View more

I am not noticing the GeoEvent Processor 10.2 in my downloads section of the Customers.esri.com site. Was it not released yet, or am I missing something? Thank you, --Adam ... View more