Latest Contributions by AkshayHarshe

‎11-22-2023

Great! Good to know that Stacked Columns work. Since each district might be in a single region you can utilize that to represent the above. Look how that worked out 😄 !

‎11-22-2023

Welcome!

‎11-22-2023

@Eric_Castonguay Thanks for submitting this idea, We will take note of this. I see that you would like to have a `color by` option on the X-axis instead of a subgroup. While this is a good idea, I think a column chart might not be the best representation of this data. Maybe a stacked column, Heat Chart, or chord diagram will be a better/more concise representation. We are working on a new chart type called Alluvial Diagrams which is set to be in the next release (2023.3). Where you can represent more than 2 categories on a single chart.

‎11-21-2023

@arc_ticodex Thanks for your questions. What you are referring to is similar to drill through filters. We have this feature in our backlog. If you have subcategories then you can use the workaround mentioned by @Eric_Castonguay with 1x predefined filter and 1x Reference table/summary table card. Alternatively, you can use a summary table with Sector and subsector to filter out other cards. The summary table will work with cross filters where you can select an entire sector or just a single subsector. In this case, you don't need to use the predefined filter.

‎11-06-2023

@mklatt_cityofventura_ca_gov Thanks for posting the idea. We will consider this. However, this should be possible to use the data components that are calculated by insights and using a cross filter on 2 or more charts.

‎10-31-2023

@CalebK This should be fixed in the next release!

‎10-31-2023

@SaraHedrick1 You should find the last updated date on the back of each card. there is a button to flip the card around Note that if you have cross filters enabled then the data on the shared report can be part Live and part static. e.g. A bar chart will be live but the card Calculate density might be static. This means every time you reload the browser you will see the updated date on the live dataset but the older date on static ones. The scheduled refresh will update the entire analysis so all the datasets will be updated at this time. If you really want to display the last updated date you can use the hack below: Open the data table on your dataset Create a new field with the formula `TRIM(NOW())`: this should create a new date column as a string. Name the column Last updated, Hide the header bar This will show count expand the column width that the count is not visible Optionally you can remove the card background to blend the card in with other cards Go to the report designer make the card even smaller and hide the bottom section with another card as such: Now this date should only update when the scheduled refresh happens. Hope that helps.

‎10-31-2023

Hi @SaraHedrick1 , I would like to know what environment you are using. Enterprise/AGOL/ Desktop What Enterprise what version, and also what version of Insights or Insights desktop? I would note down the source of all datasets. e.g. Database, hosted FS, Remote FS/ Living atlas layer etc. What method are you using for packaging if using Insights desktop Reference/Copy all data? Let us know, Thanks

‎10-05-2023

@CalebK I have tested this and I could reproduce this issue. I have logged this and asked our dev to look. We will try to get this fixed in the next release. I am sorry for the inconvenience this may have caused you. Unfortunately, that means, you will not be able to take advantage of the new report designer and some of the functionality it offers such as resizing or removing the cards for certain layouts. Most of the styling functionality is available on the workbook page, I will recommend using that instead. If you were to remove certain cards or have a different layout you can duplicate the page and re/publish without going through report desinger.

‎09-22-2023

@PaulCone2 No issues. give it a go and see if that works. If possible update your Insights. we have introduced a lot of new features since this post so you might find some pleasant surprises.

‎09-22-2023

@CalebK This sounds like a new issue, I will test this and log it if necessary. Thanks for bringing this to our attention. Any further information such as the following will be of a lot of help in narrowing this down. Deployment: (Enterprise/Online) A version of ArcGIS Enterprise and Insights (if Enterprise) What type of layout are you using to publish? (Desktop/Tablet/Phone) Let me know

‎09-13-2023

@RamaRaomalisetti I am not very sure what other layer properties the layer has or if there was an issue that was fixed at a later point. I would recommend you create a support ticket. There could be a few other reasons that I can think of that may cause this Check this https://doc.arcgis.com/en/insights/latest/administer/troubleshoot-map-image-layer.htm I will also recommend you update to a newer version though you will need to upgrade ArcGIS Enterprise as well. https://doc.arcgis.com/en/insights/latest/administer/enterprise-compatibility.htm

‎09-13-2023

I see what you mean. Currently, the report designer functionality is only available for the editors of the workbook. You can download the report here and share it separately. Unfortunately, the report designer functionality is not at a stage where the viewer of the report can download the report. We have noted this enhancement and is under consideration. Printing through browsers has limitations and not all the graphics come through which is why we built a report designer with a module that can render the app's graphics properly. If you still wish to use this the way you are doing now. I would recommend keeping the colours simple, card background white and paying extra attention to margins. Here is a link to another post where this was requested. I had commented a workaround: https://community.esri.com/t5/arcgis-insights-questions/ability-to-allow-viewers-to-print-report/m-p/1314666/highlight/true#M1406a Hope that helps.

‎09-12-2023

Hi @RamaRaomalisetti, Thanks for your question. Please let me know what operation in ArcGIS Insights is producing this error. Also, send me the steps of your workflow so I understand a little better. What version of ArcGIS Insights are you using? and the URL ends in /mapserver/<#> ? As far as I know, this should work. I tried this in the current release and it works as expected. We added the support for the map services at a later point so it is possible you are using an older version of ArcGIS Insights since you are using Enterprise 10.8.

‎09-12-2023

@RamaRaomalisetti adding to what @Ian_Muehlenhaus said, to serve you better please clarify your workflow or maybe add the steps you are doing with screenshots.

Online Status	Offline
Date Last Visited	yesterday

My Ideas

Latest Contributions by AkshayHarshe

Re: Symbolize Chart By...

Re: Cross-Filtering between Pre-defined Filters in ArcGIS Insights

Re: Symbolize Chart By...

Re: Cross-Filtering between Pre-defined Filters in ArcGIS Insights

Re: Bar Chart with date on the x axis

Re: Scheduled Publishing Using Report Designer Page in AGOL Insights

Re: Display current date in a workbook page

Re: Workbook Packaging Error

Re: Scheduled Publishing Using Report Designer Page in AGOL Insights

Re: show more than 12 months in a bar or column chart

Re: Scheduled Publishing Using Report Designer Page in AGOL Insights

Re: Querying Issue with Map Service Layer in ArcGIS Insights

Re: Discrepancy in Printed Reports in ArcGIS Insights

Re: Querying Issue with Map Service Layer in ArcGIS Insights

Re: Spatial Filtering in ArcGIS Insigths

Re: Bad Request Error 400 On all flows Using Fetch...

Re: ⚠️ Authentication Issue with ArcGIS Connector ...

Re: ⚠️ Authentication Issue with ArcGIS Connector ...

Re: ⚠️ Authentication Issue with ArcGIS Connector ...

Re: ⚠️ Authentication Issue with ArcGIS Connector ...