Latest Contributions by TubaKumbara

‎01-29-2015

Please help me.

‎01-27-2015

Hello. I need to a silverlight application code as below link. I want to show sunlight. https://www.arcgis.com/home/item.html?id=49005996397c45718783f28dedda5744 i searched on internet until months. But i found nothing. This is very important for me. Can someone share this code please. thanks inadvance. Best regards.

‎03-18-2013

hi, i really wonder if there is a way to load an image service from ArcGIS Server orher than ImageServerLayer.initialize method... For MapServices, i can use MapServer object and MapServerLayer.ServerConnect method. But there is no such method for ImageServerLayer. I can get ImageServer object but I can't get ImageServerlayer from ImageServer.. For secured layers, I mean if i connect to ArcGIS Server via username and password, I cannot load any of the ImageService from that ArcGIS Server.If i use ImageServerlayer.initialize method, it gives "Exception from HRESULT:0x8004021A".I write the username and password properties for ArcGIS Server Connection properties but I don't use these properties while using ImageServerLayer.Initialize ImageServer object uses the Connection properties but this time i cannot create imageserverlayer from imageserver. i cannot solve this problem? will you help me please

‎02-07-2013

This happens sometimes. This is the workflow I use to resolve the issue Please just use C:\ drive to create the config store and directories for now. You can move them to a different location later. 1.Remove any config store and directories that are left from previous installs. You can accomplish this by renaming them or deleting them. 2. Start the site creation, when you get the error, leave site creation running. 3. Navigate to the place of the config store and delete it 4. Resume the site creation, this should allow you to continue the installation. Please let me know if this helped. Thanks- Hi, what do you mean by saying that this happens sometimes? What can cause this situation? I really did several times what you have told in your message. This didin't help me. But i will tell you sth interesting. I uninstalled ArcGIS 10.1 for Server SP1. Then i installed ArcGIS 10.1 for Server.(without SP1) I successfully created site.After that, I installed the SP1 setup.Everything is OK. I see that in config-store\machines folder , there are files or directories called "MY-ARC101-01" just my server name (without domain name) But when I installed the ArcGIS 10.1 for Server SP1 firstly, during site creation the config-store\machines folder contains files or folders called "MY-ARC101-01.GİS.NET" (gis.net is the domain name). domain name is changed to "GİS.NET" (İ is the upper of i in Turkish) I know from the previous versions of ArcGIS Server that there is no Turkish support. Does this situation continue? if so why does ArcGIS Server (without SP1) setup works? Thanks a lot

‎02-06-2013

Ok i am telling you details. arcgisserver folder is located in C directory on the machine.not on a network path There are "config-store" and "directories" folders in the arcgisserver folder. What do you mean by asking "Is there an already configuration store in the same location" ? In the config-store folder there is ".site" folder. I deleted this folder and I tried to create the site again. This time it gives the error "Failed to create the site.Failed to configure the server machine 'COMPUTERNAME.DOMAINNAME'.Server machine 'COMPUTERNAME.DOMAINNAME' is not a local server machine." I want to say that there is nothing wrong with my computer name. but it appears in the error message that domain name has a 'İ' Turkish character in it. normally my server name is like "MY-GIS101-01.gis.net" but it seems that ArcGIS server sees the server name as "MY-GIS101-01.GİS.NET".It uses the upper chars.. And it creates a folder in config-store\machines\ as "MY-GIS101-01.GİS.NET". My server is Windows 2008 Server R2 (English) SP1. I only change the keyboard settings as Turkish. May the problem be about this server name? I really need help.I cannot do anything from this point.. Any suggestions please?

‎02-05-2013

While creating new site What can cause to give the error below? "Failed to create the site. The configuration store location contains server configuration files that are being used by another site." It takes nearly 5 minutes after I click the "Create New Site" button. At last it gives firstly "One or more server machines could not be stopped" error message. Then it gives the error above. It is really important.I dont know what to do.. What must i do to solve this problem? Please help

‎02-04-2013

I installed ArcGIS Server 10.1 the first time. Then in ArcGIS Server Manager I am choosing to create a new site. But when doing this i am getting the error below: "Failed to create the site. The configuration store location contains server configuration files that are being used by another site." There is not other site..What exactly is the problem?

‎01-30-2013

Hi, I am really confused. I setup Military Analyst 10.0 to use DefenseSolutions. I wrote a VB.NET Application (2010) which uses DefenseSolutions.CoordinateTool for coordinate conversion. It is OK.No problem. Now I am creating a Web Service on this machine which performs above process. But when I use this service in a VB.NET 2010 Windows Application, when I call the method for coordinateconversion it gives this error : "Unable to cast COM object of type 'ESRI.ArcGIS.DefenseSolutions.CoordinateToolClass' to interface type 'ESRI.ArcGIS.DefenseSolutions.ICoordinateTool'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{....... }' failed due to the following error:No such interface supported (Exception from HRESULT:0x80004002 (E_NOINTERFACE))" In the service the code is as below: public function ...... dim pCoordTool as ESRI.ArcGIS.DefenseSolutions.ICoordinateTool pCoordTool = new ESRI.ArcGIS.DefenseSolutions.CoordinateTool (I tried CoordinateToolClass, but the same error ) pCoordTool.ConvertLocation(vValue,iFormat,vFromDatum,vToDatum,pPoint1,pPoint2,DMS,UTM,MGRS) . . . end function I see from the application that when I call this service method, the ConvertLocation line gives error.. I tried to use pCoordTool.GetDatumList method but it also gives error. I think there is something wrong with the declaration. In the creation of service, Iam binding and initializing the Engine Product. Really important... Any ideas?

‎11-14-2012

ok i found solution http://resources.esri.com/help/9.3/arcgisserver/apis/silverlight/samples/start.htm#Relation

‎11-13-2012

Im waiting an answer. can someone help me please. I want to detect, Is specific location in selected area or not.

‎11-13-2012

Hello. In silverlight I have 2 variables (example) Latd = 25.334 Longtd = 23.765 I will draw a circle on my map ( I can doing it already, no problem) and i will press a button And i want to show a messagebox such as ("The Location is in your selected area") Or ("The Location is not in your selected area") so, how can i detect my Location ( Latd = 25.334, Longtd = 23.765) in or not in selected circular area.

‎11-13-2012

Hello. In silverlight I have 2 variables (example) Latd = 25.334 Longtd = 23.765 I will draw a circle on my map ( I can doing it already, no problem) and i will press a button And i want to show a messagebox such as ("The Location is in your selected area") Or ("The Location is not in your selected area") so, how can i detect my Location ( Latd = 25.334, Longtd = 23.765) in or not in selected circular area.

‎11-12-2012

Hello. Im coding in silverlight. We have tansportation company. And our trucks has GPS device, and they sending their coordinates in every 5 minutes to us. Thats okey we have no problem. I want to draw a circle or square or polygon etc (thats ok i can draw it) and i want to detect when our trucks enter into the selected area (maybe alert with message) how can i do it. That is very important for me. you can give an example for circular area. Inadvance thanks for your relations.

‎11-12-2012

Hi, on Server A I have ArcGISServer 10.0 on Server B I have ArcGISServer 9.3.1 There is an image service created from Raster mosaic dataset on Server A And I created a GlobeService on Server B. The globe document of This globe service has data which comes from Server A (image service).. I have lots of globe services in Server B, created in this way. But when I try to load some of the globe services from Server B to GlobeControl in VB.NET, I get this error : "Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))" I don't find any solution. If there is a problem with the globe services from Server B or image services from Server A, I think that all of the globe services or image services shouldn't work.Am i wrong? But in this manner, for example if i have 5 globe services which were created from image services, 3 of them work properly but 2 of them give this error. I all controlled the agsusers and agsadmin and security of the data directories ..There are no problems.. what may the problem be? Please help

‎09-11-2012

I just want to draw an ellipse according to center point, angle, inner radius(in meter) and outer radius. and couln't find any method in ArcGIS Silverlight. There is IEllipticArc in ArcObjects .I am looking for sth like tkis. Is there any solution for this?

Online Status	Offline
Date Last Visited	‎11-11-2020 02:23 AM

My Ideas

Latest Contributions by TubaKumbara

Re: I need sunlight silverlight code

I need sunlight silverlight code

ArcGIS Server ImageService

Re: URGENT (Create new site)

Re: URGENT (Create new site)

URGENT (Create new site)

Create New Site ERROR

ESRI.ArcGIS.DefenseSolutions.CoordinateToolClass

Re: How to detect a location is in or not in a selected area ?

Re: How to detect a location is in or not in a selected area ?

How to detect a location is in or not in a selected area ?

How to detect a location in selected area ?

How to detect trucks enter into the selected area

ACCESS DENIED PROBLEM

Ellipse

Re: The SketchViewModel Layer

4.7 - I need to add "http://localhost:44300" into ...

URGENT (Create new site)

Re: Is there any easy way to draw triangle, circle...

Re: LayerList Full-Extent Action for GroupLayer