|
POST
|
Does seem odd, usually embedded a YT link is one of the simplest things. Just a thought, the link YT link you posted here (https://youtu.be/iM0a4FhBh4Y) and the link you used to embed into the StoryMap are the same? You've not used another link for the YT content? Re the publishing, there's perhaps some hosted ESRI content on your page that isn't public, so that needs to be checked.
... View more
06-16-2021
01:55 PM
|
0
|
0
|
2373
|
|
POST
|
@KimGant1 Hi, can't see the story map as it's not published publicly, however, if I copy the YT link and embed that into a StoryMap of my own, I experience no issues. https://arcg.is/11y40v0 As you can see it's embedded within the map story, I've also added the sidecar down the bottom too. If all else fails, and thinking of your audience and the devices and network they may view the story map on, you could just provide the link. From where I am and with the straight forward story map, all should work for you.
... View more
06-16-2021
01:28 PM
|
0
|
0
|
2376
|
|
POST
|
@AkshayHarshe Hi, the account was a user in the org, not another org - sorry, should have been a wee bit clearer. To help, I'll package up a few screenshots of what I'm doing and why I'm doing it - might help others too. Another, hopefully quick question, is there any way to set the dimensions of a card? Eg; manually type in desired dimensions to create a card. Also, is there a way to removed the padding around a card (this will need a screenshot)
... View more
06-16-2021
12:55 PM
|
0
|
0
|
1929
|
|
IDEA
|
I realise this is an old ideas post, however, I'm here as I was looking for an answer on dark mode. So, given it's four years later and browser tech has moved along, along with AGOL and associated apps, can we please have dark mode of AGOL? Experience Builder has it, so does Quick Capture once you start editing. It'd be a really nice and welcomed addition.
... View more
06-16-2021
12:49 PM
|
0
|
0
|
7336
|
|
POST
|
@AkshayHarshe Hi, it is basically no to all the questions re joins etc., I am referencing very simple datasets from another organisational account. These datasets were already marked and managed publically. I did find a solution, nothing more than creating a seperate Insight for each - so one card, one Insight. This does seem to work now and is something I've replicated with other cards. So, talking of Insights - I've loads of other questions too about sizing and placement 🙂
... View more
06-16-2021
04:35 AM
|
0
|
0
|
1934
|
|
IDEA
|
@SteveOwens Always nice to know, but we're talking Field Maps not Survey123. @BenWalker1 The use of dates has always frustrated me, everything from 1869 or 1899 onwards! Having a very simple auto-populated field, visible to the user when the inspection is being carried out, without the need to confirm it, would be so helpful. New Inspection - date/time populated in the desired field. Fully appreciate the use of dates through edit tracking, but can get a wee bit messy when trying to spatially represent and symbolise a relationship class through a join.
... View more
06-15-2021
11:40 PM
|
0
|
0
|
10218
|
|
POST
|
@Anonymous User Is there a way to share your ExpB so we can have a look? There's ways to use "framework" filters etc., but might help if we can see exactly where you are just now.
... View more
06-11-2021
09:30 AM
|
0
|
0
|
1046
|
|
POST
|
@TonghuiMing Hi, thanks for the reply. I'm not sure whether it's me or Insights that's flakey. I ended up creating a brand new Insight using the same data, the same workbook structure, same publication and sharing options on the data and workbook. This time 'round everything is ok and I've got it embedded publicly. I do have another issue with Insights which I've sent to ESRI support , "Something is wrong" I see all too often.
... View more
06-09-2021
02:11 AM
|
1
|
0
|
1584
|
|
POST
|
Hi, I'm going to assume you're referring to the on-hover label that will show the value, rather than the category and value axis labels? If so, no, it pulls the field name rather than any alias. I'm not aware of any work-around at this time. Would be nice to have a little more flexibility with that element. Charts were only brought in last update, so perhaps this is a development that can be included as the widget matures.
... View more
06-08-2021
08:18 AM
|
2
|
0
|
2184
|
|
POST
|
Before I rant, I do like Insights, it's just infuriating me. So, what's going on? I've created a number of insights to embed into our Climate and Nature Emergency strategy, which I've created in ExpB - think of it as a living data document. CaNE v6 (arcgis.com) As an example, here's one of the pages from that experience. Now, I want to make a minor frame position change to one or two of the Insights - unfortunately, once those changes have been made and I go to "Share As", "Update" and, after a moment or two, I get the "Something is Wrong" message. Some of the data is very simple, nothing more than a few lines and attributes in a hosted feature service. The data structure hasn't changed, the permissions are all the same, in fact it may have only been an hour or so since the Insight was created. When creating the Insight, I usually copy the data to the Workbook. The Insight is created either within Insights Online within AGOL, or desktop - to be honest doesn't really matter the "Something Went Wrong" outcome pervades both. What I also don't quite get, despite the "Something Went Wrong", the Insight still clearly works - it just fails to update or allow me to change anything about it. Can anyone help?! I don't want to go back and recreate these Insights again.
... View more
06-08-2021
12:02 AM
|
0
|
2
|
1363
|
|
POST
|
Yeah, I stopped using shapefiles years ago - always better to use a feature class. I realise a shapefile can still be required elsewhere, however, for any of your won work feature classes within a filegeodb is the way to go.
... View more
06-07-2021
06:46 AM
|
0
|
0
|
2538
|
|
POST
|
Just to second @JayantaPoddar , important this work is done within a flegeodb feature class importing the Shapefile to Feature Class and importing the CSV as a table.
... View more
06-07-2021
03:42 AM
|
1
|
0
|
2574
|
|
POST
|
Hi, I've created a number of Insight pages to embed into an Experience Builder page, all works well but Insights is asking for a Sign In. My data is hosted on AGOL and all shared Publicly, when sharing the Insights page it's shared to everyone too. I want to be able to share the Experience as it is framed around our Climate and Nature Emergency Strategy, however, having metrics etc asking for logins doesn't go down well for a public user experience. The Insight I created has multiple pages, each one is shared and then embedded into the right area of the ExpB. Is there anything I'm missing? The iFrame is not complicated; <iframe src="https://insights.arcgis.com/#/embed/556353c890994d5e830b138d4cb08b9b" width="700" height="170" frameborder="0"></iframe> This is the site still under construction; https://experience.arcgis.com/experience/54b1b847e0324cec9670d30e2f0cbffc/ Do I have to recreate everything in Insights online rather than Desktop?
... View more
06-07-2021
01:33 AM
|
0
|
2
|
1651
|
|
POST
|
Hi, I've created a number of Insight pages to embed into an Experience Builder page, all works well but Insights is asking for a Sign In. My data is hosted on AGOL and all shared Publicly, when sharing the Insights page it's shared to everyone too. I want to be able to share the Experience as it is framed around our Climate and Nature Emergency Strategy, however, having metrics etc asking for logins doesn't go down well for a public user experience. The Insight I created has multiple pages, each one is shared and then embedded into the right area of the ExpB. Is there anything I'm missing? The iFrame is not complicated; <iframe src="https://insights.arcgis.com/#/embed/556353c890994d5e830b138d4cb08b9b" width="700" height="170" frameborder="0"></iframe> This is the site still under construction; https://experience.arcgis.com/experience/54b1b847e0324cec9670d30e2f0cbffc/ Do I have to recreate everything in Insights online rather than Desktop?
... View more
06-07-2021
01:32 AM
|
0
|
5
|
2019
|
|
POST
|
@JonathanBarnett1 Do you have "only one submission" set in Survey123 under Multiple Submissions? This requires an AGOL sign-in. If I remember correctly, updating of a record requires login control too.
... View more
06-03-2021
01:51 PM
|
0
|
0
|
1436
|
| Title | Kudos | Posted |
|---|---|---|
| 1 | 06-28-2021 01:30 PM | |
| 1 | 07-21-2021 08:24 AM | |
| 2 | 07-13-2021 12:54 PM | |
| 1 | 01-15-2021 11:51 PM | |
| 2 | 07-22-2021 03:54 PM |
| Online Status |
Offline
|
| Date Last Visited |
04-11-2026
10:32 PM
|