Latest Contributions by MiguelParedes

‎01-30-2024

Greetings @MarkDoehnert As @RonaldHaug suggests, you can add it as a Feature layer from the map service by using the "0" index the REST endpoint. If you are planning to use the Feature layer in other maps, you can add it to your Content by clicking + New item > URL, and then providing the URL https://www7.montgomerycountymd.gov/arcgis/rest/services/DOT/leaf_collection/MapServer/0 You should then be able to add it to any existing or new maps. To learn more about the REST endpoint (every ArcGIS Server has one) please see Using the Services Directory If you want to learn more about what other services and layers are publicly available from the Montgomery County services directory, check https://www7.montgomerycountymd.gov/arcgis/rest/services In the page you will see "Current version: 10.91" This indicates that the hosting ArcGIS Server is at version 10.9.1. Hope the above information is of assistance.

‎01-30-2024

Greetings @ElieRizk Have you installed the appropriate Oracle Client software? Please, have a look at Connect to Oracle from ArcGIS for instructions on what you need and how to do it. I hope the above helps.

‎01-25-2024

Greetings @AbuBadruddin1 As @ChristopherCounsell mentioned, the good ole ArcIfo interchange file (E00) is not compatible with ArcGIS Pro. However, whilst doing some digging, I found the following Community post, E00 files, and in there I found an interesting entry by @BarryNorthey dated 10-05-2022 05:18 AM, where he suggests downloading an ArcView GIS era 32 bit import utility and using it with Python. Alternatively and if you have them, you could use the Data Interoperability extension for ArcGIS Pro, or FME desktop. Please see Convert E00 to SHP I hope the above is of help

‎01-22-2024

Greetings @Cbonetti85 I take it that by Collaborations with other organisations you are referring to Partnered collaborations. Please, have a look at the following Public Knowledge article here, where it says "Partnered collaborations are only available for subscribed ArcGIS organizations, and are not available for developer and individual accounts such as public, trial, evaluation, and ArcGIS for Personal Use accounts." It doesn't specifically mention "Student" accounts, but I think the above also applies to them as well. If the option is not available in your Student account, that is probably the reason. I hope the above is of assistance.

‎01-19-2024

Greetings @SharonStone My apologies, I thought you were referring to the reports an Administrator of an ArcGIS Online organization can create as per the article I included in my response. Thank you for providing your workflow on how to bulk-delete reports within ArcGIS Business Analyst. I was not aware that could be done. It is always wonderful to learn something new.

‎01-18-2024

Greetings @BelalMahmoud Have you added the satellite image to Content in ArcGIS Online? Once you have done that you should be able to add it to Scene Viewer. I would like to suggest checking the excellent tutorial on Get started with Scene Viewer to gain a better understanding of how to get the best out of it. Hope the above helps.

‎01-18-2024

Greetings @SharonStone Thank you for your question and a very interesting one at that. I have checked the current documentation, but I was not able to find anything on how to delete reports in bulk. I also found the following article, Supercharge your ArcGIS Online Organization Management with Reports, but could not find anything there either. I think this functionality would be very useful, so I would like to suggest going to the ArcGIS Ideas site to request/suggest this capability. Have a great day ahead,

‎01-16-2024

Greetings @Clubdebambos Sorry if I did not understand your issue correctly. What I can see is that if add a layer containing time and add it to Map Viewer, the layer is added with and the time control is available. If I then save the map, when I reopen it, the state is maintained, that is, the map opens with the time control present but disabled. If I then enabled the time control and make it visible by clicking on the time button to the right, making the time control display at the bottom of the map, and I then save this map using Save As, to a different name, when I go back to Content, and I open the newly saved map, the time control will appear at the bottom of the map. Please, see the following video clip which illustrates the behaviour I hope the above helps clarify the issue.

‎01-16-2024

Greetings @Clubdebambos, If the time-enabled layer shows with the time setting as being enabled, disabling the option and saving the map should be honoured so that when you reopen the saved map from your content, the time setting should show as disabled. I have tested this with a map from the Living Atlas, Bioclimate Projections: (11) Mean Temperature of Coldest Quarter. When I first loaded the layer in the Map Viewer, the time setting was enabled. I disabled the setting and saved the map. I then went back to my Content page and opened the map. This time, the layer loaded with the Time option was disabled: Please see Configure time settings (Map Viewer) for more information. I hope the above is of assistance.

‎01-16-2024

Greetings @geomatique_devvs, Have you seen the article View a legend (Map Viewer)? If you require more than the above, would you provide an example of what you are after? Thank you in advance,

‎11-10-2023

Greetings @MoMahmoud First, I would check whether the basemap in your web map can be used to create Map Areas for offline use. To do so, check whether you are able to create map areas from the webmap before you add any layers to it. Once you are able to create map areas and are ready to add make sure that the layer from ArcGIS Server complies with the following: Prepare feature services for offline use. The following setting has worked for me in the past when using traditional versioning: Enabling Archiving has also worked. Hope the above is of help,

‎11-08-2023

Greetings @timcneil I was not aware of the recommendation. Is this documented anywhere? If not, this could be included as an enhancement to the documentation, don't you think?

‎10-26-2023

Greetings @YS2388 Thank you for your question. Have you tried again after yesterday's update to ArcGIS Online? Also, have you tried other tile packages? If so, are you seeing the same result? Would you be able to provide some screen captures, please? Thank you in advance,

‎10-25-2023

Greetings @GiovanniDassa1 Unfortunately, this is not possible out of the box. However, have a look at How to select multiple features in ArcGIS Online on the Select widget in Web AppBuilder that might work for you. Perhaps this functionality is something you might want to raise as an Idea for ArcGIS Online? I hope the above is of help.

‎10-24-2023

Greetings @JonJones1 Is this what you are after? Create multiple labels in ArcGIS Online Map Viewer If you need to, you can do the same in ArcGIS Pro: Display labels from two or more fields in ArcGIS Pro Hope the above is of some assistance.

Online Status	Offline
Date Last Visited	‎04-01-2026 01:38 PM

My Ideas

Latest Contributions by MiguelParedes

Re: Can I add another map layer as a layer in my map?

Re: Connection to Oracle Database using ArcGIS pro (Enterprise)

Re: Is there any tool in ArcGIS Pro to import E00 file

Re: Is it possible to use collaborations under student license?

Re: Deleting Reports

Re: I want to upload a raster layer to display it on ArcGIS Online Scene Viewer.

Re: Deleting Reports

Re: Is it possible to have the Time Slider turned off when WebMap loads and allow user to toggle on rather than the opposite.

Re: Is it possible to have the Time Slider turned off when WebMap loads and allow user to toggle on rather than the opposite.

Re: Creating a legend in map viewer

Re: Unable to Create Offline Map Areas - UAT

Re: Unexplained behaviour when upserting a hosted feature layer in AGO with UI and API

Re: Trouble publishing a map tile package

Re: Selecting Nonadjacent Features

Re: Options for Displaying Labels from Multiple Rows of Data for a Single Feature in ArcGIS Online

Re: Export Water Flow Rate from Flood Simulation

Re: Is it possible to have the Time Slider turned ...

Re: ArcGIS Pro 3.1.5: What do the green and red po...

Re: Map Notes in Map Viewer (not classic)

Re: I can't upload a hosted feature layer