Latest Contributions by RhettZufelt

‎09-08-2025

which makes sense. Desktop will have infinite zoom, however, Web map will only have the zoom levels allowed with the basemap. If you can't zoom in past 1:8000 (rather than the image just disappearing when zoomed in past that) I suspect the basemap you are using doesn't have tiles at zoom larger than 1:8000 (though, that doesn't sound quite right for a basemap). Can you share the web map (or basemap) that you are using? R_

‎09-05-2025

I tested with AGOL as we are still enterprise 10.9.1.......

‎09-05-2025

Attribute assistant rules run on the layers loaded into the ArcMap project and are controlled by the table named "Dynamic Value". Not sure of your exact request as you state, 'from one feature to another' and 'data in different geodatabase are identical' If you are just trying to have the same setup, but pulling data from the 'new' geodatabase and not the old, you would first have to re-source the layers in ArcMap (or create new map with the 'new' layers) to the new geodatabase, you should be able to just connect to the same Dynamic Value table (or, copy it to the new geodatabase also), and the assistant rules should work as before. R_

‎09-05-2025

It is behaving as if at one time there were multiple monitors or the monitor resolution was changed (or other reason) and the File Explorer window is opening up off screen. You could try these steps: press the open button as in your image then, without any other clicks/keys, hold the <Alt> key down and press the spacebar ONCE (then release Alt key) this will activate the Move/Restore window (this would be happening off screen so you won't see it) press the Down Arrow key ONCE (this will select the Move option) and press enter ONCE. (again, this will be offscreen so you won't see it) Press any of the Arrow Keys ONCE and your cursor should jump to the top of the windows explorer window and you will be in "Move" mode (if this is your problem, the cursor will jump off screen). Now, without pressing any mouse or keyboard keys, move the mouse around to see if you can bring the the FE window back to the current monitor extents. It can be finicky as far as clicking/arrowing so if it doesn't work, might try the same procedure with notepad or other app that has the FE window visible so you can 'practice' the correct steps. In case this helps, R_

‎09-04-2025

Yes, it defaults to the GPS location, but, I still have to select "Add Point", so the first part (Center the map and add a point at your location) isn't working. Only the 'Center the map' part is working, it does NOT add a point at that location. And, am still able to move the point, even though 'Block manual location' is selected. I even tried the 'Warn when manual location is used' setting, and can move/update the point all I want, submit it, with NO warning or errors. So, it appears as if they have included the option(s) to do exactly what you want, but failed to make it actually work. Hopefully someone at ESRI will see this and either point us in the right direction, or get a fix for this on the roadmap. R_ ( @KerriRasmussen )

‎09-04-2025

This is what I was thinking, but my testing shows no change in the way it handles adding point features. This seems to center the map at your location, but does NOT add the point. And, does not block the ability to move/add at any manual location. Anyone actually get this to work? R_

‎09-02-2025

no experience with enterprise 11.x, but earlier version are a little quirky with locks on services. Often, stopping the service is not enough to release the locks. Sometimes, seems more often than not, you need to stop the service, then restart the AGS service (or wait for several hours). Not sure if this applies in your situation, but pretty easy to test. R_

‎08-28-2025

You can select all that you want to show as one value in the symbology and right click, Group Values: R_

‎08-26-2025

Sounds like you are just trying to create/move a copy of the data to a different location so shouldn't need to package anything. You should be able to use the Catalog pane in Pro. Connect to the FGDB and select the feature class(es) you want to transfer and select "copy", open the Enterprise connection and choose 'Paste'. This should copy the data over and preserve the true arcs, etc. (at least with previous versions. I have not downgraded to 3.5 yet) R_

‎08-26-2025

Does the check geometry tool on the featureclass show any errors/issues? R_

‎08-13-2025

Not direct answer to your question, but I have found that in ExB (and old WAB) if you add the My Location widget, you are able to zoom to your location on GPS enabled devices like iPad/iPhone in the browser. I don't have GPS enabled windows box to test, but is possible you could go that route. R_

‎08-13-2025

Any chance you are using a tiled basemap that doesn't have any tiles at a scale larger than 1:8000? R_

‎08-13-2025

I normally just copy the aprx, the toolbox and the default.gdb to the new location. then, when I open it from the new location, it has automatically updated the defaults for the project. If not (because I didn't copy toolbox and/or default.gdb, or want them in different location) you sometimes have to update the locations in the options dialog: R_

‎08-12-2025

Not an answer to your question, but in Model Builder, I have had better luck with MakeFeatureLayer with SQL expression on it, then perform the calculations on the feature layer. Otherwise, it seems I have to re-select before each operation. R_

‎08-12-2025

The only way I see to add a point in Field Maps app without the add/update point button is to use the "Collect Here" option. R_

Online Status	Online
Date Last Visited	7 hours ago

My Ideas

Latest Contributions by RhettZufelt

Re: Can not zoom in online webmap

Re: Is there a way to digitize the point only where the user is located?

Re: Migration of attribute assistant rules

Re: File Explorer does not appear

Re: Is there a way to digitize the point only where the user is located?

Re: Is there a way to digitize the point only where the user is located?

Re: Recalculate Spatial Index Button Disabled

Re: Select specific classes for Legend.

Re: Migrating feature class layers from ArcMap Geodatabase to ArcGIS Enterprise Database question

Re: One feature missing in published service

Re: mobile unit that uses windows?

Re: Can not zoom in online webmap

Re: When doing a Save As it save in another location but

Re: The Calculate Field tool does not honor active selections and layer filters when using a SQL expression on file geodatabase data, resulting in cal

Re: Nearest Address works online but in Field Maps

Re: ArcGIS Pro Template Stripping out GDBs and Fol...

Re: Feature Class table reporting - value occurren...

Re: Append feature set to SDE

Re: Why aren't field's Display Name used in Map Vi...

Re: Drop down list from another layer

ArcGIS Arcade

Python Snippets