Latest Contributions by DanAllen

‎12-09-2022

Well that is good to know. If it is a bug with field maps, i sure hope they push out an update quickly.

‎12-09-2022

One thing i noticed, is that when you publish a new install of the water solution to arcgis online, the master water distribution feature layer has editing turned off by default, yet the hosted feature layers have editing turned on. I thought this was the source of the problem, but it still persists. I may have time to contact support today.

‎12-08-2022

HELP! I posted this same question in the Field maps community section, but I think it might be more related to the water distribution data management solution. I setup the ESRI water distribution solution, hosted on ArcGIS Online. I then used the asset collector map it gives you with the Field Maps app to collect some GPS data for fire hydrants and valves. When I submit the features, it looks like they save with no error codes. The points show up on the map in your current session, but they do not show up in the hosted feature service in ArcGIS Online. Once I close the Field Maps App (ios and android versions), the points I just collected have vanished. One other odd thing, after I "submit" a new feature in the Field maps app, is shows that it gave it a "negative" object id number. It starts at OID -10, then -11, -12 and so on. Any ideas what is going on here? I have been using Collector and Field maps for several years, and never experienced anything like this behavior. I am using the latest version 2.0 of the water distribution solution. thanks Dan

‎12-08-2022

HELP! I setup the ESRI water distribution solution, hosted on ArcGIS Online. I then used the asset collector map it gives you with the Field Maps app to collect some GPS data for fire hydrants and valves. When I submit the features, it looks like they save with no error codes. The points show up on the map in your current session, but they do not show up in the hosted feature service in ArcGIS Online. Once I close the Field Maps App (ios and android versions), the points I just collected have vanished. One other odd thing, after I "submit" a new feature in the Field maps app, is shows that it gave it a "negative" object id number. It starts at OID -10, then -11, -12 and so on. Any ideas what is going on here? I have been using Collector and Field maps for several years, and never experienced anything like this behavior. thanks Dan

‎10-03-2022

@PaulHoefflerGISS I am running the latest version of ArcPro 3.x and the legend tool is still unusable in regards to resizing. If there were improvements to its functionality, I certainly do not see them. I think I might have to start making a legend in ArcMap and copying it as a screenshot graphic over to ArcPro. Its probably faster.

‎11-11-2021

Hello, I have a utility crew that currently uses the Field Maps App for general underground utility map viewing, and Survey123 for manhole inspections. The same crew currently does a rain gauge reading daily at a couple fixed locations around their service area. The rain gauge readings are written down on a piece of paper, and they would like transition this process to the GIS. What is the best "super-simple" workflow to take this daily reading at several fixed rain gauge locations? I don't want to create a new feature point every day, so I am guessing some sort of relational table? Not sure how that would work with the new Field Maps smart forms or the ability to use a QR code at each rain gauge that they could scan and have it automatically bring up the data entry form? Any thoughts or suggestions would be greatly appreciated. I am used to setting up collection for point data, not tabular data, so I figured I would ask for some suggestions. Thank you

‎05-05-2021

You are a genius, that worked perfectly to fix the problem. Thanks!!

‎05-05-2021

Using the website version of Survey123, I have created a custom word docx report template and uploaded it to the Survey 123 website. When I created my form, I used Arial Narrow 10pt font. I then uploaded it to Survey 123. When I create a word docx report, it comes out exactly like the template I uploaded, and everything is still Arial Narrow 10pt font. The problem arises when choose the export report to PDF option. The PDF version appears to substitute Arial Narrow 10 pt font with Calibri 11 pt font. This makes all the text bigger and completely messes up my form. Is this some kind of quirk/bug, or did I do something wrong? Thanks

‎03-24-2021

I see the new beta map viewer has the ability to group layers to turn on/off multiple layers with one click. It feels like I have been waiting 7 years for this. But if you make a group in the beta viewer map, then make a WAB app from it, the groups don't show up. How long until these groups in the Beta viewer are supported in WAB?

‎03-22-2021

Thanks @DougBrowning . This still seems complex for the end user, have to go back and forth between two different apps. Is there a way to have survey 123 close and go back to collector once they complete the survey?

‎03-19-2021

New to Survey 123, but have been using ArcGIS Online and Collector since Day 1. I am really having a hard time grasping this Survey 123 setup. I have an existing hosted feature service (arcgis online) of about 3,000 manholes that need to be inspected with pictures and sketches. Ideally the survey123 would populate the the Facility ID number in the survey for the manhole, and take the same xy coordinates of the manhole cover that is already mapped in my feature service. What is the best way to do surveys of existing assets like this? Is see several articles about passing links from collector, and/or using related tables linked between survey and collector but the setup seems overly complicated and would require the user to go back and forth between two different apps. thanks

‎02-02-2021

Hi Howard, Thanks for helping get these issues resolved. Cant wait to see how this solution develops.

‎02-01-2021

Last week I tried deploying the November 2020 first release of the Water Distribution Data Management for ArcGIS Online, and the Sewer Version as well. Quite a few issues: Water Had to deploy the template several times, would fail part way through. Now I have multiple folders in ArcGIS Online that have some of the template install, but I also cant delete the folders either, as it says I cant delete them, despite nothing inside them having delete protection turned on. When deploying to solution, it prompts you to pick a spatial reference. I selected NAD 83 State Plane NY West Ft, and it appeared to accept my input, however, when I download a file geodatabase of the hosted feature layers the template creates, it is still in Web Mercator. So that part does not appear to work. When I download the ArcGIS Pro Project Package that gets installed, all of the layers in the map when it opens in ArcGIS pro have the red exclamation point next to them, and I have to manually reassign them to the hosted feature layers. Sewer Template Same error as listed above for #1 Same error as listed above for #2 When I download the ArcGIS Pro Project Package that gets installed, it opens up in ArcGIS pro completely blank. Overall this looks like a great start with the templates, so hopefully these issues above can get resolved. Thanks Dan

‎02-01-2021

So I was able to use the Attribute Rule Rotate Feature by Intersected Line found here: https://github.com/Esri/arcade-expressions/blob/master/attribute_rule_calculation/RotateFeatureByIntersectedLine.md I was able to get it to work, but only after downloading a copy of the Water Distribution Data Management for ArcGIS Online to a file geodatabase on my desktop. Is there a way to get this feature to work with a hosted feature layer as part of the Solution template?

‎01-29-2021

Hello, I am a long time user of the water utilities model with the attribute assistant in ArcMap. I am trying out the new version called Water Distribution Data Management for ArcGIS Online with the ArcGIS Pro download to edit. My question specifically is will the ArcGIS Online version of this solution using ArcGIS Pro (standard), will some of the old attribute assistant features like Rotate Valves be available? If so, how do you use it? Thanks Dan

Online Status	Offline
Date Last Visited	‎12-09-2022 02:54 PM

My Ideas

Latest Contributions by DanAllen

Re: Trouble with Water Distribution Data Management Solution and Field Maps

Re: Trouble with Water Distribution Data Management Solution and Field Maps

Trouble with Water Distribution Data Management Solution and Field Maps

Field Maps - New Features Created with Negative Object ID and Disappear Once App is Closed

Re: Scale Legend Contents Automatically with change in size

Best Workflow for Daily Rain Gauge Readings

Re: Survey123 Custom Report Font Quirk/Bug?

Survey123 Custom Report Font Quirk/Bug?

Map Viewer Beta Group Layers in Web AppBuilder?

Re: Best Approach for Survey123 of Assets that are already mapped?

Best Approach for Survey123 of Assets that are already mapped?

Re: Several Errors - Water Distribution Data Management for ArcGIS Online Solution Deployment

Several Errors - Water Distribution Data Management for ArcGIS Online Solution Deployment

Re: Rotate Valves with Water Distribution Data Management for ArcGIS Online

Rotate Valves with Water Distribution Data Management for ArcGIS Online

Re: Collector - Don't Allow Null Values

Web AppBuilder - Wrap Around Text For Map Title In...

Best Workflow for Daily Rain Gauge Readings

Map Viewer Beta Group Layers in Web AppBuilder?

Best Approach for Survey123 of Assets that are alr...