Latest Contributions by ModyBuchbinder

‎11-09-2020

Hi All In ArcMap when you add an image service you can open the attribute table and select by attributes. You can do all this with code too. In Pro the attribute table is disable and when you try to select by attributes you do not see any attributes of the service. I could not find any way to do it in the SDK too. This is easy to do in REST - should I call REST from C# to select tiles from Image Service?? Thanks

‎11-08-2020

Hi all We try to create a new tab ("our project") and then add groups of buttons. We have two different addins (two different solutions) that have the same new tab adding different groups with different buttons. It does not work. When you register just one of the addins the tab and group are visible. When you add them both it looks like the last one just recreate the tab so only one group exists in it. Is there a way to do it or you have to put all group in a new tab into the same addin. Thanks

‎11-02-2020

We are running a model. I cannot share the results but there is up to one pixel different in the created raster. When you zoom into any of the edges and show the two results in different color or with transparency you can see that there are some differences. I am thinking about replacing the model with python script. If it shows the same behavior I can print out the exact parameters to see if they are equal (and all environment too)

‎11-01-2020

Hello all We have a gp service that runs Visibility. It gets a point layer (not interactive) and some other numeric parameter (such as radius). We see a little different in results when we use the same point layer from ArcMap (using the service) or from WebMap. Since it is exactly the same parameters it should be exactly the same. Running from webmap or translating the file into JSON and running it from REST give the same results. What can be the reason for this? Is it possible that when you call the service from soap (From ArcMap) the parameters are a little different? Thanks

‎10-26-2020

Hi all We are using this interface to get a line from measure A to B. If the return polyline is on the first polyline we get zero from esriLocationError If the line span to the second polyline we get the correct result but the esriLocationError is 7 or 8. For example we have one line with measure 0 -9 and a second line with measure 9-21. If we ask for locate on 5-7 we get return zero. If we ask for 8-15 we get the correct line but status different from zero. Thanks Mody

‎10-22-2020

Just to make the question more clear. It is easy to see how many instances is open but when you have many of them, each one with a different maximum it is to easy to see witch one does not have max instances big enough.

‎10-21-2020

Hi George Thanks for the response. Technical support might say this is ok so I first need to understand if it is reasonable. I hope if somebody has a polygon with more then 10k vertexes they can test it in 3 minutes. It is a Linux (Red Hut) machine that runs Geodatabase 10.7.1 The time is changing by the polygon (not sure if it is linear). This is just some countries borders but very detailed. The border of Russia have many more vertexes and takes for ever. Thanks

‎10-21-2020

Hello all We are trying to translate some geometries in Oracle to WKT using st_AsText It takes a long tome for complex features. For example a polygon with 31k points was translated into 600k WKT string in 25 seconds. Does this reasonable time? Is there any tuning in the database or Geodatabase that can make this faster? Thanks

‎10-19-2020

Hi all I have an aprx with one map and one layer. I want to change the extent of the aprx with Python so when the user open the aprx the extent will be full extent (it was save with wrong extent. I tried the very simple code below, it does not gives an error and the aprx is saved but the extent is unchanged. When I uncomment the zoomToAllLayers I get an error. There is some solutions with layout (I do not have it in this aprx). If I work with the CURRENT aprx then the activeView give me mapView that is working but I do want it to run without open the aprx. Any ideas? import arcpy aprx = arcpy.mp.ArcGISProject(r"xx.aprx") map1 = aprx.listMaps()[0] mapView = map1.defaultView lyr = map1.listLayers()[0] desc = arcpy.Describe(lyr) print ( str(desc.extent)) mapView.camera.setExtent(desc.extent) #mapView.zoomToAllLayers() aprx.save()‍‍‍‍‍‍‍‍‍‍

‎10-14-2020

The Explore button is great. It has a lot of functionality without need to change current tool. We would like to replace the identify with our own code but leave everything else unchanged. There is no problem to create a new tool with customize identify but we do not want to change current tool all the time from Explore to our identify (like we needed in ArcMap). Does anybody have any idea if it can be done and how? Thanks

‎10-13-2020

The download page still have 4,16 Please update Thanks

‎10-11-2020

Hi All I have a dockpane with a few buttons. some of the buttons takes a while (running a few GP tools) and all the buttons depend on each other. When I press a button I do not like the user to press any other button in the pane until the one that I pressed is finished. All other panes, pan/zoom etc. should be active. The way I found is to define IsEnable with binding for each button then when the button starts I set it to false and NotifyPropertyChanged. This works but I need to do do it for each button. I was hoping to find a general way to do it for all controls in the dockpane. I was looking for Enable here: ArcGIS Pro 2.6 API Reference Guide but it does not work. Should I use conditions and how? Thanks

‎10-10-2020

Hi all The ArcGIS Enterprise SDK is mainly for SOE & SOI Can I write a standalone program (for example service running on server) with it? Is it possible technically and by the licenses agreement? We need some service that do GIS stuff on server. Arcpy is one option but it is limited. We do not want to depend on ArcMap or Engine but the CoreHsot of Pro SDK is very limited. Runtime is one more SDK that can do it but it is one more SDK to learn.. Thanks Mody

‎10-07-2020

Hi Uma Thanks for the answer and code. I will try it. What will happened if I add a few elements one by one? Will GetElements().FirstOrDefault() always return the last element added? If it is true then I need to do a loop with AddElement, GetElements().FirstOrDefault and SetName - for each element I would like to add - correct Thanks Mody

‎10-06-2020

Hi All I am trying to create a graphic element with code and then to get the element by the name. Code example below. The FindElement does not find anything. Open the element in Pro show that the name is still the default. In all the samples of FindElement it looks by default names (Point, Point 1, etc). Is it a bug?? Thanks Mody QueuedTask.Run(() => { //Place symbol in the center of the map var extent = MapView.Active.Extent; var location = extent.Center; //specify a symbol var pt_symbol = SymbolFactory.Instance.ConstructPointSymbol( ColorFactory.Instance.GreenRGB); //create a CIMGraphic var graphic = new CIMPointGraphic() { Symbol = pt_symbol.MakeSymbolReference(), Location = location, //center of map }; graphic.Name = "Mody"; graphicsLayer.AddElement(graphic); var elems = graphicsLayer.FindElements(new List<string>() { "Mody"})[0]; });

Online Status	Offline
Date Last Visited	yesterday

My Ideas

Latest Contributions by ModyBuchbinder

Limitations with access an Image service

Add groups to custom tab from two addins

Re: Different between running gp service from rest or ArcMap

Different between running gp service from rest or ArcMap

Return value from IRouteLocator.Locate

Re: ArcSoc usage

Re: Time for st_AsText for complex features

Time for st_AsText for complex features

Set extent to aprx with Python

Partially overwrite the Explore button?

Download 4.17

Disable Dockpane

Write standalone application with ArcGIS Enterprise SDK

Re: Create a graphic with name

Create a graphic with name

Monitor javaw.exe

Enterprise staging 11.4 license

Re: Preserving GlobalID from enterprise database t...

Re: Do map or feature services read publishing Arc...

Re: ComboBox with predefine string values in dockp...