DOC
|
Hi Wes, The UPDM 2015 and UPDM 2016 versions of the data model were written for earlier versions of ArcGIS for Pipeline Referencing and the Geometric Network. The UPDM 2018 and upcoming UPDM 2019 versions are written specifically for ArcGIS for Pipeline Referencing 10.6 and higher, and the Utility Network for Gas. Not sure of the specifics of you current and planned deployments of the ArcGIS capabilities. The best practice data models for the Geometric Network and the Utility Network are very different. Would not recommend trying to deploy the Geometric Network on the UPDM versions created to support the Utilty Network. And the software will not support the use of GN specific UPDM versions for Utility Network deployments. Hope this helps Tom DeWitte Technical Lead - Natural Gas Industry Esri, Inc
... View more
04-09-2019
08:40 AM
|
0
|
0
|
3365
|
BLOG
|
Getting Started By Identifying Customers Impacted By Tom Coolidge and Tom DeWitte News of a gas outage can arrive from various sources. It can come from a sensor indicating an abnormal condition. Maybe it comes from a customer calling into customer service. Or, a contractor calling operations after an excavation mishap. Another possibility is a citizen calling in to report gas odor at a location. Regardless of the source of the outage news, confirmation of an outage triggers one of a gas utility’s priority processes – restoring safe and reliable service to customers. As important and critical a task as gas outage management is to a gas organization and to the community it supports, this process has changed little over the last 100 years. For many gas organizations, it can take several hours to identify which customers have been impacted. Once the customers are identified, getting the list of impacted customers to the field gas operations staff is still primarily a paper process. Someone literally must get into a vehicle and drive the list of customers to the location of the gas outage event. As the field gas operations staff begins the gas relight process, they too still tend to use paper to document the status of each customer. This means that management will always have a delayed understanding of the progress of restoring gas service. When the mayor or governor calls asking for an update, gas executives are often get caught with little current information to pass on. There has got to be a better way. And, there is. In fact, most of the gas industry already possesses the software to resolve these issues and significantly improve a gas organization’s response to a gas outage event. The software I am referring to is the ArcGIS software currently widely used by gas organizations around the world. This blog is the first in a series of three blogs explaining how the standard capabilities of the ArcGIS software can be deployed to address these common gas outage management challenges. All functionality described in these blog articles are standard capabilities available today. No customization or coding is needed. This first blog addresses the issue of identifying the customers impacted by a gas outage event. This task often takes several hours when it needs to be accomplished in minutes. Additionally, the historical processes have had problems with accurately identifying the impacted customers and communicating precisely where those customer meters are located. The second blog will address the issue of communicating the list of impacted customers to the gas operations field staff. The typical paper process takes too much time, causing delayed field operations and lower customer satisfaction. The third blog will address the gas relight process. This process is also typically performed with paper. The use of paper to track and communicate progress adds difficulty and inefficiency to this process. The use of paper not only engrains a delay in relaying the update status to gas management and other interested parties, it also inputs a delay in relaying the status of individual meters between deployed field staff. Identifying Impacted Customers Current methods used by many gas organizations are lacking in accuracy and timeliness when identifying the customers impacted by a planned or unplanned gas outage. One common method is to use the Customer Information System (CIS) for identifying impacted customers. Since a CIS typically lacks an understanding of the connectivity of the pipe system, it is forced to rely on street address ranges. The use of address ranges is inaccurate. At every street intersection are four corner parcel lots. Whether they are included in the address range is dependent on what street the house is listed under. This inaccuracy often requires a time-consuming manual process of having someone review the list, identify all crossing streets within the address ranges, determine the address ranges of those crossing streets, identify the corner lot addresses, then determine for each corner lot, whether it gets its gas from the impacted line, or from the gas line running down the cross street. Another common method is to use flow analysis systems to perform an isolation trace to identify the impacted customers. This process is quicker, but it too is imprecise. The imprecision is due to the flow analysis software’s requirement to cluster groups of customers onto the gas pipe system at a singular location even though they each have individual service lines connecting to the gas main at discrete locations. In today’s gas pipe systems, the majority of gas mains are constructed of pinchable polyethylene plastic pipe. A gas event can be isolated or pinched at nearly any point along the plastic gas main. The clustering of customer locations along the pipe system creates an inherent conflict between where gas operations places a clamp to pinch the pipe, and where the flow modeling engineer chose to aggregate the cluster of customers. This conflict creates an inaccuracy in the identification of impacted customers. Accurately and quickly identifying impacted customers The solution to addressing this problem is to use a system that understands the connectivity of the entire pipe system from its source, such as a town border station, to its end destination at the customer meter. ArcGIS provides the ability to maintain a connected representation of the entire pipe system, and the ability to perform a gas isolation trace to identify the meter or meter sets impacted by a gas outage. To perform this trace, you will require the following software: ArcGIS 10.2.1 or higher, with a geometric network or ArcGIS Pro 2.3 or higher, ArcGIS Enterprise 10.7 or higher with a utility network Additionally, your ArcGIS representation of the gas pipe system will need to model the following gas system assets: mains services isolation valves regulator stations (if regulator station valves are not individually mapped) town border stations (if town border station valves are not individually mapped) meters or meter sets NOTE: If using meter sets you will need a link to a table identifying all meters contained within the meter set. This table is often an extraction of information from the Customer Information System Your mains and services will at a minimum need to include the material of the pipe, so pinchable pipe can be differentiated from non-pinchable pipe. The Gas Isolation Trace The gas isolation trace is a more complex trace algorithm than simply identifying those pipes connected to the location of the pipe system failure, which are also between isolating valves. With most gas pipe systems, the network is deliberately looped, to provide multiple sources of gas to any given location in the pipe system. If this were true for every location on the pipe system, a simple connected trace defined to stop at barriers such as isolating valves or pinch points would be all that is needed. But, there are portions of most gas systems where locations have only one source of gas. Think of a gas pipe running along a dead-end street or a cul-de-sac. If there is an isolating valve or pinch point at the location where the single feed pipe subsystem integrates with the larger looped pipe system, then the simple connected trace would ignore the customers on the downstream side of the barrier. A more intelligent trace algorithm is required. This more intelligent trace algorithm is generally referred to as the gas isolation trace. A gas isolation trace is a multi-trace trace. This means that the isolation trace runs a series of traces. The first trace is the connected trace to identify the barriers (isolating valves and specified pinch locations). Then a second round of traces is performed for each selected barrier. This second round of traces is checking to verify that there is a source of gas feeding the barrier from the opposing side of the barrier. This is to identify those dead-ends which do not have access to another source of gas. Those customers downstream of the barrier on the dead-end need to be included in the list of customers impacted by the outage. Gas Isolation Trace tools The ArcGIS gas user community is fortunate in that there are multiple options for tools which can perform this industry specific type of trace. One option is to download the free Gas utility editing tools provided by Esri. This ArcMap Add-In is available from the following Esri web site: http://solutions.arcgis.com/utilities/gas/help/as-built-editing/ Another option is to leverage ArcMap Add-In tools from one of our business partners, such as Schneider Electric or Magnolia River. For the ArcGIS Pro environment leveraging the utility network, this trace is a base capability as of the ArcGIS 10.7 release. Identifying Impacted Customers Operating the gas isolation trace tool is not complicated. Simply identify the estimated location of the pipe system failure on the map. In GIS speak this is called placing the flag to identify the start location of the trace. When the isolation trace is run it will select all customers within the impacted area. In my screen shot below you can see that this initial run selects over 100 impacted customers. Identifying the location of pinch points The prevalence of pinchable polyethylene plastic pipe enables the additional capability to reduce the number of impacted customers, by applying a gas clamp to pinch the pipe and stop the flow of gas to the location of the pipe system failure. To represent this field capability in the GIS system, place a barrier at the location being considered for the pipe clamp. With the proposed location(s) of the pipe clamp(s) now identified, the isolation trace is run a second time. This time the resultant list of impacted customers has been reduced to less than 20. The person running the analysis for both traces has so far only invested a few minutes of their time. In that short time an accurate list of impacted customers has been created. Defining the extent of the gas outage event In today’s always connected, smartphone world, gas executives and managers expect to be able to access critical information that is easy to understand. They generally do not need to see the list of individual customers impacted, often all they want to know is “where is the outage”, and “how many customers are impacted.” By identifying the list of impacted customers with the ArcGIS tools, it is very easy to run an additional step to generate a polygon to define the boundary of the event. In the GIS, a tool such as the Minimum Boundary Geometry geoprocessing tool will perform this task. The creation of an event area feature provides a clear visual understanding of where this outage is occurring. Having this singular feature representation also provides an intuitive means for managing event summary information, such as duration, and count of impacted customers. The Esri-provided gas isolation tools automatically generate this polygon as part of the operation of the isolation trace. In addition to the automatic generation of the polygon, a of every meter is generated and assigned an event ID to automatically relate the impacted customers to this specific event. With the list of impacted customers defined and created, as well as the event bounding polygon, this information is ready to be electronically shared to gas operations field staff. In the next blog, the 2 nd blog of this blog series, the issue of delivering this list of impacted customers will be addressed. Conclusion ArcGIS today is deployed worldwide at many gas organizations, providing the ability to replace and improve upon non-spatial legacy processes. Identifying impacted customers, whether they are connected by steel pipe or pinchable plastic pipe, can be accomplished in just a few minutes. Using the ArcGIS tools can provide a more accurate list of impacted customers than is available via legacy methods. This list not only identifies who has been impacted, it also clearly and accurately identifies where those impacted customers are located. PLEASE NOTE: The postings on this site are my own and don’t necessarily represent Esri’s position, strategies, or opinions.
... View more
03-22-2019
10:43 AM
|
1
|
0
|
1182
|
BLOG
|
Similarities and Dissimilarities Among Electric and Gas Outages By Tom Coolidge and Tom DeWitte After a storm with strong winds and rain heavy enough to cause flooding, one neighbor away at the time may ask another still there if there are any outages in the neighborhood. It’s understandable if the first response back is about whether the area’s electricity is still on or not. That’s because outage is a term more commonly associated with electricity than natural gas, for good reason. Electric outages are much more common. A survey by the American Gas Association, reported by the Natural Gas Council, revealed in one recent year that Americans experienced 8.1 million power outages and fewer than 100,000 natural gas outages! One obvious reason for that sizeable difference is that electric distribution networks predominantly are above ground, while gas pipe networks predominantly are underground, free from most hazards on and above the surface. That difference makes it rare for an event to be severe enough to impact the ability of a natural gas distribution network to safely deliver gas to customers. But events of a magnitude sufficient to cause many customer outages at one time do occur. For instance, entire areas of a gas utility service territory can be affected by flooding from a hurricane or pipe breaks from an earthquake. And, likewise, they can be affected by pipe dig-ins at a critical location during construction activities or failure of pipe metal due to corrosion or other cause. Beyond temporary inconvenience, gas outages caused by pipe damage releasing natural gas may be dangerous. The release of natural gas represents an imminent threat to people and property. That makes resolving this threat as rapidly as possible critical. A gas outage not only presents a threat to the safety of people and the preservation of property, it also presents a negative impact to the local economy. Restaurants that rely on gas to heat their grills and ovens, cannot operate. Hotels are unable offer their rooms when they are unable to heat their rooms or provide hot water for bathing. Manufacturers which rely on natural gas to run their operations must close and send their workers home. There is another significant difference between electric and gas service. Restoring gas service is more difficult than restoring electric service. That is because electric distribution systems are designed to be shut down under abnormal conditions and natural gas pipe networks aren’t. Restoring natural gas service following an event that causes many outages is a multi-step process involving multiple parties, many workers, and lots of time and effort. For this blog, I will combine the many steps into three groups. These groups are: identification of impacted customers, assignment and transmittal of impacted customers to field staff, restoring gas service to customers. These three primary steps are the same steps followed back in the horse and buggy days when gas distribution systems were initially implemented. Back then the best technology for enabling this process was paper. Building a gas outage process on paper is problematic. The process of identifying impacted customers is inaccurate and time consuming. It takes some gas organizations hours to generate the list of customers impacted by a gas outage. Having humans manually review lists of customer addresses to determine who is connected to the impacted portion of the pipe system is time consuming and inaccurate. No customer on a cold January day wants to be told that the gas utility is still reviewing customer lists to determine who is impacted. Using paper in the field to track the relight process for restoring gas service is inefficient. Field staff and office management are both blind to the progress of restoration until someone stops working and manually shares their information. These problems are not new, they have been around since the first gas distribution pipe systems were constructed in the early 1800s. Technology has changed dramatically since the early 1800s. Alexander Graham Bell invented the telephone in the 1870s, greatly improving the speed of communication. John Atanasoff, while teaching at Iowa State University in the 1930s, created the first electronic digital computer, setting the stage for advanced data storage and analytics. Frank Canova of IBM created the first smartphone in the early 1990s. Steve Jobs, of Apple, Inc, would later improve upon the idea of mobile communication and computing with the IPhone. Jack Dangermond, the founder of Esri, Inc., created ArcGIS providing the means to leverage these major technology advances with geography. Geography is core to understanding the connectivity of a pipe system and where along the pipe system impacted customers of a gas outage are located. With all these amazing advances in communication, digital computing, mobile computers, and Geographical Information Systems (GIS), why are some gas utilities still using a predominantly paper-based solution to gas outage? There may well be multiple reasons for that, but those possible reasons no longer include the unavailability of GIS capable of supporting a totally computer-based approach to supporting the gas outage restoration process. Today’s ArcGIS presents gas utilities with the opportunity to greatly improve on how they execute the gas outage restoration process. Modern gas service restoration at its best is an enterprise-wide activity with workers in the field and office working together collaboratively in real-time on one source of the truth. Next week we will release the first in a series of three blogs on modern gas service restoration. This first blog addresses the issue of identifying the customers impacted by a gas outage event. This task often takes several hours when it needs to be accomplished in minutes. Additionally, the historical processes have had problems with accurately identifying the impacted customers and communicating precisely where those customer meters are located. The second blog will address the issue of communicating the list of impacted customers to the gas operations field staff. The typical paper process takes too much time, causing delayed field operations and lower customer satisfaction. The third blog will address the gas relight process. This process is also typically performed with paper. The use of paper to track and communicate progress adds difficulty and inefficiency to this process. The use of paper not only engrains a delay in relaying the update status to gas management and other interested parties, it also inputs a delay in relaying the status of individual meters between deployed field staff. These three blogs together will describe how the core capabilities of the ArcGIS platform, enables a gas utility to implement a modern gas service restoration process. A process that is accurate, efficient and timely. A process that will provide customer service reps, gas operations supervisors, and gas management with the real-time clarity on the progress of each customer thru the gas service restoration. Dramatic enhancements in communication and computation have occurred since the first gas distribution systems were built in the early 1800’s. Industry pioneers such as Bell, Atanasoff, Canova, and Dangermond have given the world incredible enhancements. Isn’t it time these enhancements were put to use? PLEASE NOTE: The postings on this site are my own and don’t necessarily represent Esri’s position, strategies, or opinions.
... View more
03-15-2019
05:53 AM
|
2
|
0
|
2046
|
DOC
|
Hi Lee, The UPDM 2018 Edition already has an attribute named "COMMODITY" on the PIPELINELINES featureclass in the PipeSystem feature dataset. It has a subtype specific coded domain assigned to the Subtypes: Service Pipe, Distribution Pipe, Transmission Pipe, Gathering Pipe, Station Pipe, Customer Pipe, Riser Pipe. The values in the coded domain are: Natural Gas, Synthetic Gas, Hydrogen Gas, Propane Gas, Landfill Gas, Petroleum, Gasoline, Diesel, Water, Wastewater, Steam. Should this attribute be added to other assets, such as Devices or Junctions? Or is the pipe feature the only featureclass that needs this descriptor? When I compared your list in your message, I see you listed the following that I did not have in my list: Crude Oil, Natural Gas Liquids, Refined Products, Liquid Petroleum Gas, CO2, Highly Volatile Liquid, Other Gas, Other Liquid. Is this a complete list? Another question. Some of your items are generic classifications, should be list be restricted to specific types of gas and liquids? Appreciate hearing your thoughts and the thoughts of anyone else who wished to add input. Thanks Tom DeWitte Technical Lead - Natural Gas Industry Esri, Inc
... View more
12-13-2018
12:18 PM
|
0
|
0
|
20361
|
DOC
|
Hey Joe, You are correct, the DIAMETER2 and WALLTHICKNESS2 attributes for Devices and Junctions featureclasses was mistakenly left out of the UPDM 2018 model. It is scheduled to be added to the UPDM 2019 Edition, which is slated for release in Q1 of 2019. Thank you for pointing this out. Please let us know if you find any other items which will enhance or correct UPDM. Tom DeWitte Technical Lead - Natural Gas Industry Esri, Inc
... View more
12-13-2018
12:04 PM
|
0
|
0
|
20361
|
DOC
|
Good morning Jeanetta, Thank you for identifying the items you listed in your message. We are always looking for feedback to help us improve the data model and its documentation. We are about to begin the process of updating the data model for 2019. On the "fix it" list is the clean-up of the coded value domains and the addition of the ServiceTerritory featureclass to the Data Dictionary. We will also be looking at ways to further simplify the creation of UPDM and its modules, such as Darris pointed out in his message. Our goal is to have this update completed and posted by the end of March 2019. Thanks Tom DeWitte Esri Technical Lead - Natural Gas Industry tdewitte@esri.com
... View more
11-26-2018
06:23 AM
|
1
|
0
|
20361
|
DOC
|
Hi Brian, Yes, we have successfully prototyped the use of Arcade scripting and the new Attribute Rule capability to automatically decode the ASTM F2897 barcodes. There are a couple of minor issues with the scripts that we have not yet had a chance to address. Specifically; 1) The Error handling of the Manufacture Date is not consistently working correctly in all use cases. 2) For Diameter and Wallthickness the decoding of a 2 diameter fitting (i.e. reducer) is not processing correctly. Single diameter fittings and pipe are working correctly. These Attribute Rules will work with Collector, ArcGIS Pro, and web maps. They do not work within ArcMap. Additionally they require an Enterprise Geodatabase working with ArcGIS Enterprise 10.6.1 or higher. Until, there two known issues are resolved, I do not intend to post the arcade scripts. But, if you are interested in using them, please contact me directly and I will provide them to you. Tom DeWitte Technical Lead - Natural Gas Industry email: tdewitte@esri.com
... View more
11-13-2018
06:55 AM
|
0
|
0
|
3162
|
DOC
|
Hi Brian, Within the python script is a function called: AppendSelectedRecords. this function is where each featureclass of selected features is processed. The first part of this function runs a cursor to test individually each record in the featureclasses selected set. For each row it tests whether the BARCODE value is NULL. If it is NULL is skips the row and moves onto the next row in the selection set. If the BARCODE value is populated, it attempts to decode it. There is messaging built into the function to indicate for each ROW whether it thinks the BARCODE is NULL or whether it is processing the BARCODE. If you are not seeing either of these two messages, than the script is not seeing a selection set. When this occurs you should see a message stating: "No Selected Staging Features". This would happen if you did not run the tool interactively in ArcMap, and draw the polygon which is used to intersect (ie. Select by Location) the staging featureclasses. Hope this helps Tom DeWitte Technical Lead - Natural Gas Industry Esri, Inc
... View more
11-13-2018
06:46 AM
|
0
|
0
|
3162
|
DOC
|
Hi Darris, UPDM 2018 is a unique data model, in that it is the only data model in the industry that was designed to support the needs of gathering, storage, transmission, and distribution. Most gas companies will only utilize the portion of the data model which is specific to their needs and deployment pattern. In answer to your questions, for a distribution only gas utility: 1. Does this mean that going forward I need to purchase licenses(s) for the ArcGIS Pipeline Referencing extension? Esri Response: No. 2. If I implement the second pattern, Network Topoology with Utility Network Data Management, do I need to have the ArcGIS Pipeline Referencing extension to use the Assest Inspection module in the UPDM? Esri Response: No 3. If we don't have the ArcGIS Pipeline Reference extension, what are the limitations to using the UPDM? Esri Response: The ArcGIS Pipeline Referencing extension provides the capability to use linear referencing to place and locate your gas facilities. This is not a method typically used within gas distribution companies. If you have additional questions, please respond to this thread. thanks Tom DeWitte Esri Technical Lead - Natural Gas Industry tdewitte@esri.com
... View more
09-23-2018
12:36 PM
|
1
|
0
|
20361
|
POST
|
Good morning Mark, Here are a few suggestions that I hope will help you with your modeling of CP systems within the Utility Network and UPDM 2018. 1) Keep in mind that the Utility Network similar to the geometric network cannot have two assets occupy the same position in coordinate space. In the case of the Utility Network that means two assets with the same X, Y ,Z coordinate. If your Insulated Node feature is to locate the same location as a coupling, then you will have issues. 2) The UPDM model manages insulated fittings and insulated devices through attributes. Specifically on the PipelineJunction featureclass and the PipelineDevice featureclass there is an attribute called: InsulatorDevice. This Yes/No boolean field defines where the assets acts as a cathodically insulating device. 3) When modeling CP systems with subnetworks, you will want to create a separate Tier Group from the Pipe tiers. Then you will want to create a Tier under the new Tier group. I usually name my Tier group: Cathodic Protection, and then name my Tier as CP System. Hope that helps Tom DeWitte Technical Lead - Natural Gas Industry Esri, Inc
... View more
08-13-2018
05:58 AM
|
1
|
0
|
797
|
BLOG
|
Finding those key buried devices and paths By Tom Coolidge and Tom DeWitte A gas utility or pipeline typically transports natural gas or hazardous liquids to customers through a large and complex network of interconnected pipes. In addition to pipe, these networks are comprised of an even larger number of other components, including fittings, valves, regulators and many more, some of which can affect the flow of the fluid through the pipes. Modeled properly, ArcGIS enables you to create a “digital twin” of all this complexity. This is key as many solutions require that you be able to determine a path directionally from a location in your connected network to a separator or separators that bound it. The utility network provides this capability. It all starts with location. I find that as I get older, I am more frequently asking myself questions such as; where did I leave my glasses, or where is my phone. Resolving these questions usually entails me wandering about the house until I find those misplaced glasses or phone. Finding these items is not that difficult because I can see my glasses sitting on a table or I can see my phone as it sits on the kitchen counter where I left it. Now imagine you work for a natural gas or hazardous liquids pipe organization, and all of the assets you are looking for are buried three or more feet below the surface. How do you go about finding a specific valve, fitting or cathodic protection anode? The short answer is maps. But, maps like traditional paper maps have their limitations in that when looking for a specific valve you must have a pretty good idea of where the valve is located in order to know what map sheet to look at, and where on that busy map sheet to look. Digital maps are better, in that they allow you to search for a characteristic of the valve such as its assetID, manufacturer, size or type. But, a digital map also assumes you have some knowledge already about the valve you are looking for. So, what do you do when your question is about the pipe network, and how a specific asset participates in the pipe network? This is where tools which understand how the assets connect to form the pipe network are required. This is where you need tracing tools to know your pipe system. What type of questions can be answered with a trace? When managing a pipe system there are many questions that get asked everyday which require an understanding of how the pipe system works. During an emergency, a very common and important question is: what valves do I need to close to isolate a section of the pipe network where damage or a leak has occurred? A common question asked by cathodic protection technicians is where is the nearest CP test point from my current location on the pipe system? Gas engineers who are evaluating a pressure zone ask the question; what are the regulator stations providing gas to this location? What do I need to do to configure my gas system for tracing? For a software system to be able to answer these common types of pipe system questions, an understanding of how the components of a pipe system connect is required. It is not enough to simply draw a digital representation of the asset on a map, such as is commonly done with CAD software. In addition to drawing the digital representation of the asset on a map, there also needs to be an understanding that the two polyethylene pipe segments which have been butt fusioned together are connected. This software understanding of connectivity is network topology. Within the Esri ArcGIS platform, our latest version of network topology for utility systems is what we call the utility network. Can I perform a trace in ArcGIS Pro? Yes. Tracing your network can be performed within ArcGIS Pro version 2.1 or later. Additionally, with the utility network being a service based solution, tracing can also be done with web applications, and eventually will be able to be performed by mobile applications. Within ArcGIS Pro, the options for configuring a trace have been significantly enhanced when compared to the ArcMap geometric network tools. It is now possible to dynamically answer questions by simple configuration of the properties of the trace tool. For example, if you are trying to determine the amount of gas or liquid lost due to a break in the pipe, you need to know the volume of the portion of the pipe network which was isolated. There is now a function property to the trace tool to allow you to summarize the total pipe volume of the trace selected pipe segments. If you need to ask the question, what portion of my pipe system is upstream of a specified location, but only trace on those assets which are in production, and are open to allow the gas or liquid to pass through. The ArcGIS Pro trace tool now supports the ability to use designated asset attributes such as LifeCycleStatus, DeviceStatus, Pincheable, and Insulator Device to dynamically constrain which assets the trace can traverse. This, too, is a simple configuration of the tools parameters. Since the trace tool is a geoprocessing tool, your preferred configuration properties can be saved as a model and shared across the organization. How do I configure a trace to find the nearest asset? Being able to find the nearest type of asset such as a regulator, valve, or CP test point, is another useful new addition to the capability of the trace tool. Simply checking a box within the filter options will constrain the trace output to the specified features which are closest based on the distance traversed across the pipe network. How do I configure the trace tool to find the sources feeding a gas subsystem? The new trace tool within ArcGIS Pro contains some new trace options, such as subnetwork, subnetwork controller, shortest path, and loops. When a planner or engineer needs to find the regulators feeding a specified location, the subnetwork controller option makes this an easy question to ask of the pipe network. Tracing with the new utility network solution provided by Esri, is unique in its ability to allow gas and hazardous liquids pipe companies to easily ask questions of their pipe networks. Databases alone cannot answer these questions. CAD systems cannot answer these questions. Even GIS systems which do not include network topology cannot answer these questions. Only a complete GIS system which includes network topology can answer these everyday questions about your pipe network. Only a network topology specifically built for management of utility systems such as a gas or hazardous liquids pipe network can provide the intelligent tools to help you know your system. PLEASE NOTE: The postings on this site are my own and don’t necessarily represent Esri’s position, strategies, or opinions.
... View more
06-11-2018
09:37 AM
|
4
|
0
|
2651
|
DOC
|
Erica, The type-o on the Structure Junction attribute field LocationDescription has been corrected and an revised zip file has been reposted. Tom DeWitte Esri Technical Lead - Natural Gas Industry
... View more
03-26-2018
07:06 AM
|
0
|
0
|
20361
|
DOC
|
Thank you Jake! This site is monitored by Esri staff. We will get this identified type-o to the correct folks for correction. Thank you Tom DeWitte Esri Technical Lead - Natural Gas Industry
... View more
03-14-2018
04:19 PM
|
0
|
0
|
20361
|
DOC
|
Mark, In early April the current Gas Asset Package will be updated with the asset package that was included in the UPDM 2018 zip file. The Esri solution site has a set update release schedule, that is why the updated package will not be available on the Esri solution site until April. Tom DeWitte Esri Technical Lead - Natural Gas Industry
... View more
03-14-2018
04:17 PM
|
0
|
0
|
20361
|
DOC
|
UPDM 2018 Edition has been reposted to geonet. Thanks Tom DeWitte Esri Technical Lead - Natural Gas Industry
... View more
03-13-2018
04:56 PM
|
1
|
0
|
20361
|
Title | Kudos | Posted |
---|---|---|
1 | 3 weeks ago | |
2 | 03-04-2024 11:43 AM | |
4 | 02-13-2024 12:08 PM | |
1 | 02-06-2024 05:58 AM | |
5 | 11-20-2023 02:10 PM |
Online Status |
Offline
|
Date Last Visited |
3 weeks ago
|