Latest Contributions by DavidBrooks5

‎11-09-2020

I have an editable hosted feature layer that is shared with a closed group. I also have a non-editable view layer that's visible to the public, and this is the layer that's in a view only web app. When I update the editable layer with ArcGIS Collector (or through any standard web map edit), the edit doesn't appear in the web app unless i refresh the web page. It doesn't appear just by panning the map. This refresh behaviour is unusual, and I would expect the edit to appear just by panning the map. Any thoughts people?

‎10-01-2020

Im hoping someone can verify if I need to modify my collector web map or if it's fine as it is. I have a Trimble Catalyst with the following GNSS profile: Frame - ETRF2000(R05) Geoid - EGM96 (Global) I have set up a GNSS profile in Collector as follows: GNSS Coordinate System - GCS ETRS 1989 (4258) Map coordinate system - WGS 1984 Web Merc Aux Sphere (3857) Transformation - ETRS_1989_To_WGS_1984 My collector web map has a basemap in Web Mercator Aux Sphere, but the point file im collecting my GNSS points in is a feature service in British National Grid (OSGB) (27700). Should I have changed my feature service to a web mercator one, or will the coordinates transform correctly into BNG via the Web Maps on-the-fly transformation?

‎09-21-2020

Thanks for the reply, but I was hinting at whether arcade could perform some of the functionality in the absence of attirbute rules. I.E. if attribute rules aren't yet supported on AGOL, could Arcade code be embedded somehow in a service or web map to perform simple field calculations?

‎09-21-2020

It would be useful to know if the basic functionality in attribute rules (ie multiplying 2 fields together to calculate another field) is possible with Arcade? Would you need some type of trigger to fire off the field calculation, and can Arcade achieve this within a web map and a subsequent offline collector session?

‎09-08-2020

Interestingly I'm having the exact same issue with the Trimble Catalyst. I have my Samsung galaxy s20 set for mock GPS and using TMM to send the location data to Collector, but when collecting points in Collector, it's not populating all the esrignss fields and it's identifying the GPS receiver as the Samsung internal GPS. Also, I've experience similar behaviour as another person on this thread, whereby I can see an RTK fix in TMM, but as soon as i open collector, the fix is lost and TMM refreshes it's satellite list. The only workaround was to have both apps open in split screen mode, which prevented TMM from refreshing. Not ideal. Also, after a random spell on site where collector refused to receive TMM positioning, I restarted all apps and my device, and then subsequently, all the points I collected were logging catalyst as the receiver in the metadata, and it was logging all the ancillary attributes as well. I'm praying that this functionality will continue when I'm next out on site!!

‎09-08-2020

I have a similar query, but wasn't sure of the best place to post my issue, so will reply to this to see if like minded users have experienced the same problem. I've been using the catalyst for a few hours of collection now using the latest version of Collector, and have noticed that on some occasions it collects gnss metadata as a Samsung internal GPS, and other times it collects as Catalyst RTK. On both occasions, the TMM has achieved RTK lock and on both occasions the accuracy is 1-2cm. The only difference is that when it records the collected point with the "Samsung" attribute, it's missing a load of other ESRI gnss attributes such as no. satellites or direction of travel etc. Anyone else noticed this? Obviously, I've followed all the recommended developer settings and have set up a GPS profile in Collector.

‎09-06-2020

I know this has been asked before, but does anyone in the Inc camp know if Attribute Rules are coming to ArcGIS Online in the near future for hosted feature services? And whether these will be planned to work offline in Collector? There are a few business opportunities hinging on this functionality!!

‎09-01-2020

Any thoughts on the best way to GeoCode the Ordnance Survey benchmark data? All I've found online is a CSV of the data: https://www.ordnancesurvey.co.uk/legacy/docs/gps/CompleteBenchMarkArchive-NoFBMs.zip In there is the ordnance survey grid code across 3 columns (100km tile code, plus eastings and northings of limited precision). Im looking for a way to either geocode OS grid, or programmatically convert these into standard E/N.

‎08-02-2020

Can anyone from INC update us on when / if attribute Rules will be implemented on AGOL soon? Would be great to plan some of my key business capability for 2020/21 which is reliant on this.

‎05-27-2020

I work with SLPKs created from both Drone2Map and from Pix4D. I also receive these from other customers. If the elevation offset isn't correct when generated in Pix4D, i can easily rectify this by modifying the json file contained inside the SLPK by editing this archive using 7zip: "drawingInfo":"", "elevationInfo":{ "mode": "absoluteHeight", "offset": 1000 }, "heightModelInfo":"" } HOWEVER, if i try this method with an SLPK created in D2M I get an error when saving the archive edit. Any ideas on this one?

‎03-16-2020

Yes, it's making a https capabilities request even though i initiate the call as a http request

‎03-13-2020

Hi Jacob, Thanks for the tip, but because my organisation has been working in HTTPS since it's conception, I don't have the option to accept HTTP sources. Not a problem, will just have to look into hiding my MapProxy behind a HTTPS reverse proxy.

‎03-10-2020

I have a WMS that I'm serving on an AWS instance that works in ArcMap and ArcGIS Pro, but when I try and add to an AGOL web map, it successfully adds to the map with user credentials, but AGOL sends encrypted SSL get requests to the server (which is running over HTTP :8080) and fails to return tiles back to AGOL. What's interesting is that the initial get capabilities request goes over in plain text (hence why my wms can be populated and added to the map with service credentials in the bottom right corner), but then AGOL switches to making HTTPS requests for the tile (it seems). Running developer tools in chrome yields the following error message: Failed to load resource: net::ERR_SSL_PROTOCOL_ERROR I can provide a link to the WMS if anyone would like to test this themselves. The coordinate system is WMAS (3857) and I've tried adding as a layer, and as a basemap. I've also tried specifying parameters in the wms wizard. For anyone with MapProxy experience, the CMD console returns the following during the SSL tile requests from AGOL: [error] 195.143.10.203 - - [10/Mar/2020 08:16:00] code 400, message Bad HTTP/0.9 request type ('\x16\x03\x01\x02\x00\x01\x00\x01\xfc\x03\x03)\x85\xdb{\x99\xd1.i\x13\x96\xc2Es\x82o\x1c[8F\xef/*\\\x1amM\x04\x98g\xa61\x1d') [info] 195.143.10.203 - - [10/Mar/2020 08:16:00] " ⁿ )à█{Ö╤.i û┬Eséo [8F∩/*\ mM ÿgª1 ± ¡í?Å▀Pù Aé:¡┬?σ8IdÖa ≡ uX╩σ;▀É "JJ └+└/└,└0╠⌐╠¿└ └ £ ¥ / 5 " 400 - [error] 195.143.10.203 - - [10/Mar/2020 08:16:00] code 400, message Bad request syntax ('\x16\x03\x01\x02\x00\x01\x00\x01\xfc\x03\x03\x02\x14\x02Y\xdc`\xdaC\xa6') [info] 195.143.10.203 - - [10/Mar/2020 08:16:00] " ⁿ Y▄`┌Cª" 400 - [error] 195.143.10.203 - - [10/Mar/2020 08:17:25] code 400, message Bad request syntax ('\x16\x03\x01\x02\x00\x01\x00\x01\xfc\x03\x03\x18\xfa\x11RB') [info] 195.143.10.203 - - [10/Mar/2020 08:17:25] " ⁿ · RB" 400 - But the following during tile requests from ArcMap: [info] 195.143.10.203 - - [10/Mar/2020 08:21:32] "GET /service?SERVICE=WMS&VERSION=1.3.0&REQUEST=GetMap&CRS=EPSG:3857&BBOX=-8670903.73129359260201454,-10566598.1958502009510994,8225625.76812049094587564,10566598.1958502046763897&WIDTH=674&HEIGHT=843&LAYERS=BING_Hybrid&STYLES=&EXCEPTIONS=XML&FORMAT=image/png&BGCOLOR=0xFEFFFF&TRANSPARENT=TRUE& HTTP/1.1" 200 - Im wandering if AGOL forces HTTPS, due to it's security policies. I'll need to change the MapProxy configuration to serve over HTTPS if that's required for troubleshooting.

‎02-16-2020

This worked for me after I created SLPKS of all my 3d data.

‎02-16-2020

Thank you for all your excellent comments and solutions. I can confirm that the above approach works a treat. And I'm glad I wasn't going made when trying to filter the data. In the end, I ran the Create Bounding Volume tool on the highly complex models, to made crude versions, and then swapped out the mulipatch before generating the SLPK building package. My next challenge is that some of the model elements from Revit appear to be offset in the x y and z from the main bulk of the model (up to kilometres away in some cases. This potentially implies that they aren't referencing the base/survey points correctly somewhere between Revit and Pro.

Online Status	Offline
Date Last Visited	‎11-11-2020 02:25 AM

My Ideas

Latest Contributions by DavidBrooks5

Auto refresh for Hosted Feature Layer Views?

Collector with Trimble Catalyst - Datum problem?

Re: Welcome to the Attribute Rules Community!

Re: Welcome to the Attribute Rules Community!

Re: Collector with Trimble R2- record correct GNSS Receiver name to metadata?

Re: Why can't Collector 20.1.0 connect to Catalyst antenna?

When are attribute rules coming to ArcGIS Online?

GeoCoding the OS Benchmark Data

Re: Support for Attribute rules in ArcGIS Online

Can anyone successfully modify an SLPK archive?

Re: MapProxy WMS works in ArcMap and ArcGIS Pro using HTTP, but ArcGIS Online fails. Can it work?

Re: MapProxy WMS works in ArcMap and ArcGIS Pro using HTTP, but ArcGIS Online fails. Can it work?

MapProxy WMS works in ArcMap and ArcGIS Pro using HTTP, but ArcGIS Online fails. Can it work?

Re: Can anyone publish a scene layer to ArcGIS Online witb ArcGIS Pro 2.5?

Re: Filter Building tool greyed out; layer missing statisical information

Can I add this Google XYZ Tile Service to AGOL?

Re: Import SketchUp file

Re: Revit 2020 Support Timeline?

When are attribute rules coming to ArcGIS Online?

Re: Support for Attribute rules in ArcGIS Online