Latest Contributions by LauraMawhinney

‎04-01-2021

My co-worker tried the address locator in the newly created .mxd copy and it is working for him. I think the issue was a corrupt .mxd. Thank you Joe for your responses.

‎04-01-2021

Today I tried opening the mxd that my co-worker is having issues with using the address locator. The address locator works on my computer. I created a mxd and he is now going to open it and test the address locator.

‎03-31-2021

Yes, that is a compliment and an accomplishment. You are correct that he has added the services to his new mxd. And yes the old mxd with the same services work. I'm not sure what would cause this.

‎03-31-2021

Hi Joe, When he types in either an address or an intersection he doesn't see a response. Typically you will see a message that says the location was found or not. We tested both locators and are not getting a message. He does have proper credentials to access the services. I hope that you can retire soon.

‎03-31-2021

My co-worker has older .mxds where the address locator will find intersections or addresses. We use the default ArcGIS World Geocoding Service and internal generated geocoding services. He created a new .mxd and the address locator will not find any address. We reset the geocoding toolbar to the default in case he made changes. We also opened a blank .mxd with no layers to test as well and wasn't successful. Others in our group have working address locators, so it is just him right now. Any suggestions are welcome.

‎09-17-2019

Hi Amber, My co-worker and I are very interested in getting a functionality such as what you mention in this previous post. i.e. We would like users to be able to copy and paste while editing. We tried following your instructions above, but couldn't see the select feature to copy option while editing in smart editor. Please see attached image. Any guesses as to what we didn't do?? This would totally make our week and month...

‎08-25-2019

Hi Lance, Thank you for looking at the data and providing feedback. I also found your journey to resolve issues with your collections effort informative and hopeful. It gives me hope I can do this too!

‎08-24-2019

Lance, Thank you for looking at the data I supplied. The surveyors use WKID 2223. Our GIS department uses WKID 2868. I reached out to my Trimble contact last Friday and asked about the offset issue. I am hoping to get a reply back this Monday. I will confirm the datum and units for altitude values. I am attaching another FGDB with more layers. I went out this morning and took points at the same locations, but with the NTRIP connection instead of the RTX. The are close to the survey pts again. Additionally, I included points from a loaner Leica and Trimble unit taken back in 2017 with a NTRIP connection. These also cluster all in the same areas. You mentioned that Trimble site indicates that ITRF2017 is used after March 23rd. 2017. I found this tidbit online here: Configuring the correct GNSS Receiver Coordinat... | Trimble There is an asterisk *ESRI Collector does not yet support ITRF2014(current) so this is the best approximation. I confirmed that data collector doesn't have an option for ITRF for 2014. The highest I see is 2008. I will try the EPSG 4326 and see what happens. Thank you for your interest. Laura

‎08-23-2019

Hi Lance, I appreciate your thoughts. Yes, dealing with coordinate systems and getting them correct is tricky and challenging. Here is some history. The surveyor provided the point information in degrees, minutes and seconds. I converted them to the NAD 1983 HARN StatePlane Arizona Central FIPS 0202 Feet Intl proj coordinate system (WKID 2868). I projected the points taken with with RTX using the project tool from WKID 3857 to 2868 with a geographic transormation of NAD_1983_HARN_To_WGS_1984_2. I am going to take you up on the offer of supplying data if you want to look at it. Attached is a zipped FGDB with three feature classes. SurveyPts_2868 is the survey points. RTX_testpts_3857 is the original "raw" data from the hosted feature service. RTX_testpt_2868 is the result of the projection. I am curious what you find.

‎08-23-2019

Hello, Our current process is to use high accuracy Trimble R2 GPS units with a NTRIP connection to local CORS stations here in Tucson, AZ. The horizontal accuracy is falling anywhere between 1 and 5 inches. We had our Survey team collect a set of data points so that we use this for comparison. When comparing the Trimble points to the survey points, they are within a range of 1 to 5 inches. Anything less than 6 inches is acceptable for us. However, we are also experience lost connections from time to time. So, I am testing out Trimble's RTX Field Point product as an alternative. The fix time is anywhere from 2 to 5 minutes. The horizontal accuracy reported back is generally 3.9 inches. The mobile device is a samsung galaxy S8. My web map layers have a WKID projection of 3857. So I set the collector for ArcGIS (classic) location profile as: GNSS Receiver Coordinate System: GCS ITRF 2008 Map Coordinate System: WGS 1984 Web Mercator Auxiliary Sphere Datum Transformation: itrf_2008_to_nad_1983_2011 + wgs_1984_(itrf08)_to_nad_1983-2011 When I bring the points collected while using Trimble's RTX field point product into ArcPro they (green pts) are all consistently shifted west and south to the survey points (yellow). This leads me to think that I am not doing something right rather than an issue with the unit or the RTX. Attached is a screen shot of the location profile and of the points compared to the surveyed location with a one foot buffer. I am thinking it may be the profile, but I am not sure what else to use. If anyone has an idea of what is going on, I would really appreciate your thoughts, ideas and suggestions.

‎06-13-2019

I really enjoy operation dashboard and providing this to others in our organization. If this can be implemented, it would provide a function that I think users would intuitively want. This would be really useful for operations dashboard users after they have filtered and/or query to immediately export to csv or excel. The experience of having to jump to another application and redo the filter and/or selection all over again is not optimal. So they would be less likely to do this.

‎08-01-2018

Hi Carmel, I received tried again and it worked. I am not sure what happened the first time, but it is working now. Thank you! Laura

‎07-20-2018

Hi Carmel, I tried your suggestion of renaming. It is still shows the sde name and user prefixed before the name in the table of contents. Laura

‎07-19-2018

Hi Carmel, Thank you for this information. Laura

‎07-18-2018

Hi Carmel, These are hosted feature services published from ArcGIS Pro to portal. It seems that part of the publishing process is adding the sde database name "dev" and my user name "lmawhin1" in front of the rest service name.. If I rename the layer in portal in the contents afterwards it doesn't carry over to the display in data collector. This information is not need for the user experience and makes it hard to read. I looked at the link and documentation, Although you can change field properties, domains and their values, template details and max record count, I didn't see anything about the name of the rest services itself. I wish that I could. Laura

Online Status	Offline
Date Last Visited	‎08-11-2022 08:40 AM

My Ideas

Latest Contributions by LauraMawhinney

Re: Address Locator is not finding address in ArcMap

Re: Address Locator is not finding address in ArcMap

Re: Address Locator is not finding address in ArcMap

Re: Address Locator is not finding address in ArcMap

Address Locator is not finding address in ArcMap

Re: Select, Copy, and Paste feature in WebApp Builder

Re: Why are my data collector points shifted southwest of my survey point?

Re: Why are my data collector points shifted southwest of my survey point?

Re: Why are my data collector points shifted southwest of my survey point?

Why are my data collector points shifted southwest of my survey point?

Re: Add reporting and ability to export to CSV

Re: Can't change name of rest service when creating a new record.

Re: Can't change name of rest service when creating a new record.

Re: Can't change name of rest service when creating a new record.

Re: Can't change name of rest service when creating a new record.

Re: ArcPro Legend will not resize symbols or label...

ArcPro Legend will not resize symbols or labels

Re: Address Locator is not finding address in ArcM...

Re: Address Locator is not finding address in ArcM...

Re: Add reporting and ability to export to CSV