Latest Contributions by WilliamCole

‎01-27-2024

I tested the file:\\\ method with a local C: drive file and was able to open the file from the Pop-up. I then tested this again with a file from a networked device and was not able to open the file from the Pop-up. I'm guessing this is telling me that I have a network permissions problem somewhere. Where, though, is the question.

‎01-26-2024

Thanks for this information. Learn somethings didn't know. When I applied the technique shown in your response, I did not get a clickable Pop-up entry. The screen shot below lays out how I assembled this. Entered the UNC in the Attribute Table's WriteUp column. Then in the Configure Pop-ups pane using the Hyperlink button entered as shown. Finally, the Pop-up itself shows the correct UNC but it is not clickable. Just to be sure that I had this right I copied the UNC from the Pop-up and then pasted into the address bar of my browser. I was able to open the file. I am stumped.

‎01-25-2024

Running ArcGIS Pro v 3.2.1 under Windows 10 22H2.

‎01-25-2024

I have a field in the Attribute Table for a Feature Class [FC] that contains a UNC value that points to a word processed file. The field is called WriteUp and is a text field with a length of 100. Taking instruction from this ESRI web page I entered the UNC for the word processed file into that field. The UNC points to a locally networked NAS box. To make sure that I had permission to access this I entered the UNC into Windows File Explorer and was able to properly access the file. In the ArcGIS Pro pane Configure Pop-ups for this FC I entered a Text element, edited that element using the Hyperlink dialog and entered {WriteUp}, where WriteUp is the name of the field that I want to access in the Attribute Table. On opening the Pop-up the hyperlinked text field displayed the correct UNC but was unable to open the link by clicking on it. When mousing-over the field, the absence of the hand cursor seems to indicate that the link is not available. I have another field in the same Attribute Table called Content which contains a URL for a web site. I built its Pop-up text entry in exactly the same way as the WriteUp Pop-up entry. This works just fine. Here's a screen shot of the Pop-up. Clues would be very welcome. Thank you.

‎10-17-2023

by WilliamCole Wednesday This environment is Windows 10 22H2, Desktop ArcMap 10.8.1 and ArcGIS Pro 3.x. I have imported an.mxd map along with its .gdb geodatabase from ArcMap into ArcGIS Pro. The import brought the Table of Contents from ArcMap into ArcGIS Pro and placed all of the layers as they were in ArcMap. The ArcMap ToC has two groups of layers: the first contains all of the project's individual maps with symbology. The second group contains all of the georeferenced historical "base" maps which are attached to the underlying base via their control tables. In ArcMap, georeferencing an historic map created a control table used to attach that map to the base map. Repeating this process for each of the 30-some historic maps in my project created a "mosaic" of historic maps attached to the base map. [This is not a mosaic created with the ArcMap Mosaic tool. I was learning ArcGIS and didn't know about mosaics until after I had done the georeferencing work.] While this method worked for ArcMap it clearly doesn't for ArcGIS Pro. In ArcGIS Pro I am able to attach one georeferenced .jpg file to my base topographic layer and to import the control table for that raster which places it properly on the base map. However, if I try to add a subsequent georeferenced image with its control table -as I was able to do in ArcMap- ArcGIS Pro asks "Do you want to erase the existing control points?" Answering Yes replaces the existing control points associated with the first raster with the control points for the second raster, thereby placing the first raster image at the location for the second. Answering No appends the second set of control points to the existing control points for the first raster image ... making a mess. What am I doing wrong and what do I need to know to fix this, please? Thank you so much.

‎10-11-2023

I have imported an.mxd map from ArcMap into ArcGIS Pro. The import brought the Table of Contents from ArcMap into ArcGIS Pro and placed all of the elements as they were in ArcMap. The ToC has two groups of layers: the first contains all of the project's individual maps with symbology. The second group contains all of the georeferenced historical "base" maps which are attached to the underlying base via their control tables. In ArcMap, georeferencing an historic map created a control table used to attach that map to the base map. Repeating this process for each of the 30-some historic maps in my project created a "mosaic" of historic maps attached to the base map. [This is not a mosaic created with the ArcMap Mosaic tool. I was learning ArcGIS and didn't know about mosaics until after I had done the georeferencing work.] While this method worked for ArcMap it clearly doesn't for ArcGIS Pro. In ArcGIS Pro I am able to attach one georeferenced .jpg file to my base topographic layer and to import the control table for that raster placing it properly on the base map. However, if I try to add a subsequent georeferenced image with its control table -as I was able to do in ArcMap- ArcGIS Pro asks "Do you want to erase the existing control points?" Answering Yes replaces the existing control points associated with the first raster with the control points for the second raster, thereby placing the first raster image at the location for the second. Answering No appends the second set of control points to the existing control points for the first raster image ... making a mess. What am I doing wrong and what do I need to know to fix this, please. Thank you so much. [The one-year delay from the last post is due to unhappy reasons.]

‎02-03-2023

I made a mistake saying that the Edenton raster was properly placed. In reality the raster was placed based on the control points for the Beckford raster. My apologies.

‎02-02-2023

Thank you for your reply. I have followed your suggestion but have not gotten what I had hoped for. Here is a screen shot of the situation: The first control table import I did was for Edenton which is reflected in the control table tab at 1. Then I highlighted the Beckford raster at 2, clicked on the Import Control Table icon, selected the control table for Beckford and clicked OK. Pro asked "Do you want to delete the existing control points?" so I selected Yes. [The choices are: Yes, No, Cancel] Pro then added the new control points for Beckford, at 3, but didn't assign those points to the Beckford raster so it was not properly placed on the the base map. I was expecting a second tab to show that had Beckford in its title but that didn't happen. The Edenton raster, however, remained properly placed and its control points in place, though now I'm not sure where to find its control point table. I'm not sure what to make of this. Clearly still I'm doing something incorrectly. Thanks, Bill Cole

‎01-26-2023

I am working on converting one of my ArcMap geodatabases [with associated maps] to run on ArcGIS Pro. In a Windows 10 22H2 environment. My ArcMap gdb for one of my maps includes about 30 historic map raster files each of which has its own control point table [CPT] attached. When I open this gdb in ArcGIS Pro I see each of those raster files in the Contents panel under the Base Map heading. Highlighting a single raster and then in the Imagery ribbon selecting the Georeference icon displays the Import Control Point Table icon. Selecting that and then selecting the ArcMap-created CPT associated with that raster brings those settings into the ArcGIS Pro CPT properly placing the raster on the base map. So far so good. However when doing this for a second raster, the CPT entries are added to the same ArcGIS Pro CPT as for the first raster creating an erroneously referenced image. How can I assign each raster its own CPT so that the CPT entries do not combine with a previous CPT. Or am I going about this entirely wrong? Clearly I'm in learning mode. Thanks very much.

‎11-07-2022

I sorted it out. After carefully reading the little information tag next to the "Authorize ..." checkbox I discovered I had logged on with the wrong account. Changed accounts and all is well. Pro is now happily living on its new quarters.

‎11-07-2022

Should have added: ArcGIS Pro is living on the same machine as my ArcGIS Desktop single-user installation. I have deauthorized that license already and have moved it to the new machine. Relationship between the two?

‎11-07-2022

Robert, thank so much. Unfortunately the "Authorize ArcGIS Pro to workoffline" checkbox is grayed out. I am unable to change it.

‎11-07-2022

I found the document about how to deauthorize an ArcGIS Pro single-use license here. [I'm moving to a new computer.] However the instructions do not include version 3.0. When I open my ArcGIS Pro settings page per the instructions, instead of seeing what's in these instructions I see: ArcGIS Pro 3.0 Settings Help please. Thank you very much. Bill Cole

‎11-07-2022

Apologize for the delayed response. Thank you all very much for the information. I have been able to import the mxd files without issue. The georeferenced files - which are historic maps - are the part that I'm trying to understand how to import. These files are stored as jpg files. The georeference Link Table [which is opened from the Link Table icon on the Georeferencing tool bar] text files which contain the reference link number, x, y coordinates and some other data also, I think, need to be included. These files represent a lot of work which I really don't want to have to repeat. Thanks again for the input.

‎11-03-2022

Am running ArcMap 10.8 under Windows 10. I have imported a number of ArcMap .mxd files into ArcGIS Pro. Several of these maps have georeferenced maps attached. How do I import those as well to ArcGIS Pro? Thanks very much.

Online Status	Offline
Date Last Visited	yesterday

My Ideas

Latest Contributions by WilliamCole

Re: Pop-up UNC Link Not Working

Re: Pop-up UNC Link Not Working

Re: Pop-up UNC Link Not Working

Pop-up UNC Link Not Working

ArcMap to ArcPro: Georeferenced Rasters

Re: Import ArcMap Georeferenced Files into ArcGIS Pro

Re: Multiple Rasters Multiple CPTs

Re: Multiple Rasters Multiple CPTs

Multiple Rasters Multiple CPTs

Re: Deauthorize an ArcGIS Pro 3.0 License

Re: Deauthorize an ArcGIS Pro 3.0 License

Re: Deauthorize an ArcGIS Pro 3.0 License

Deauthorize an ArcGIS Pro 3.0 License

Re: Import ArcMap Georeferenced Files into ArcGIS Pro

Import ArcMap Georeferenced Files into ArcGIS Pro

Re: Write Multiple Attribute Tables to Single CSV ...

Re: Write Multiple Attribute Tables to Single CSV ...

Re: Iterate Through Attribute Tables to Create Con...

Re: Moving ArcGIS Data To New Computer

Re: identify panel fills whole screen