Latest Contributions by Katie_Clark

‎02-07-2019

Hello Geonet! Has anyone else had issues with georeferencing images in ArcGIS Pro? It's something I do on an almost daily basis in ArcMap, and I keep attempting to switch my workflow to ArcGIS Pro to practice using the software since I know Esri is planning on transitioning completely to Pro. However, I find the experience to be so buggy that I can't even complete this simple task. After fitting an image to display, I try to pan around and my cursor is stuck on the rotate function, no matter which button on my mouse I click. If I change the transparency of the layer with the ribbon and then use the L keyboard shortcut to turn the layer off/on, the transparency doesn't save and it always goes back to 0%. However, if I turn the layer off/on in the TOC it seems to stick. The biggest offender is that when I try to set a control point, once again my cursor is stuck on the rotate function. This has happened so often that I frequently can't georeference the image at all. On my most recent attempt, after several minutes somehow it seemed to change (though I have no idea what caused that to happen) and I was able to set a few control points, but then I opened the control point table and once again the pan function didn't seem to work using either my mouse or the C keyboard shortcut. After enough frustration I went back to ArcMap for a completely smooth process and had several images georeferenced in less than five minutes. Just want to know if I'm alone in this experience or if there are others who share my frustration? I am eager to embrace ArcGIS Pro and the changes that Esri is promoting, but I can't do this if I can't even complete simple workflows such as this. Thanks for any thoughts or input! Best, Katherine

‎12-26-2018

Thanks so much for your response, Phil! I look forward to seeing what functionality gets added to Survey123 in the future.

‎12-10-2018

Hello, I have a request from a client to include a summary field in a Survey that would summarize the entries from a certain field from all previous survey entries so that they can have a quick reference to know which stations have already been monitored. Is this possible with Survey123 Smart Forms? And if not, does anyone have any ideas of an approach to get a similar functionality? Thanks! K

‎12-04-2018

Had this issue today - tried a bunch of different things to troubleshoot, but finally found out that the issue was that the data was PolylineZM instead of just Polyline. I thought I had taken care of that because I disabled M and Z values in my environment settings, but I ended up using the Feature Class to Feature Class tool on all of my layers to turn them into simple Polylines and then I was able to publish. Found that suggestion from this blog: Anna's Hydrology Blog: Get rid of Polyline ZM Hopefully this can help someone, it's interesting to see so many different solutions in this thread! I agree that a more specific error message would be more helpful

‎11-21-2018

I had the same problem with some of my layers, it was extremely frustrating for our field crew who had to keep re-entering their field notes! It's interesting that you're running into this problem now. I logged a bug with Esri that is documented as being fixed as of version 6.2. For me, since the issue seemed to be caused on the initial opening of the widget, I had to tell my field crew to open the edit window, close it, and then reopen it again before entering any edits. This resulted in a much higher success rate of the edits "sticking". Still extremely frustrating though! Maybe your issue will have a more straight forward fix - I'd be interested to hear if anyone else has any ideas!

‎11-14-2018

Hmmm....it seems like that could be caused by several things. Is it an extremely large data set? It could also be an issue with the geometry, in which case you would need to run the "repair geometry" tool in ArcMap and then republish. You could also try rebuilding the spatial indexes through the feature layer settings tab, that's helped me a few times in the past, when point feature layers weren't drawing even though there were only a few points in them. You might also have better luck calling Esri support so you can do a screenshare session and show them exactly what's going on. Best of luck!

‎11-13-2018

Survey creators should be able to configure 'time' and 'dateTime' questions so end users can enter this information following a specified time format. For example, I would like to configure a date time question so the time is entered always following military (24-hour time) format. Currently, the datetime and time questions get the time format from the locale of the device. This is not ideal. I want to control the time format for data entry. As an idea of what the XLSForm syntax could look like: New syntax for the body::esri:style or appearance columns.

‎11-13-2018

Marisa, Thank you so much for your response! I did look at that blog post, but I hadn't tried using the dateTime field type since I only wanted to time to post in that field. However, I'll look into that a bit more and play around with it, thanks for the suggestion! Best, Katherine

‎11-13-2018

What error message are you getting, specifically? Are you able to share the data you're working with?

‎11-12-2018

Hello, Did the OP find a way to change the display? I feel like this is closely related to my question and I am trying to get some answers. Change military time display in record table Thanks! James Tedrick‌ Jordan Miller‌

‎11-08-2018

Hmmm...my first thought would be to create a new field in the feature layer and use the field calculator to do something like assign a value of 1 if avg_daily_boardings = 0, a value of 2 if avg_daily_boardings between 0.01 and 4.99, etc. Then create the pie chart based on this new field and change the labels under the "Slices" tab when configuring the dashboard to make the pie chart look like how you want the end users to see it. I'm new to Ops Dashboard as well, so maybe someone else has a more efficient approach?

‎11-08-2018

Hello, I am building my first survey with Survey123 Connect for ArcGIS. I want a "Crew Start Time" and "Crew End Time" field, which I have successfully added to the survey. It looks like when the data is displayed in the data table, it is automatically entered in military time. Is there a way to change this format so that it says AM or PM? Thanks for any help!

‎11-07-2018

Are you wanting to do this with code using ArcGIS API for Javascript? Have you looked through Esri's training resources in the course catalog? It also looks like there are a lot of good tutorial videos on youtube and other articles from Esri that describe certain examples, which could either help you directly or point you in the direction of other resources. For example, "Creating 3-D Web Apps in ArcGIS Online - Tracking Hurricane Irma" - https://www.esri.com/arcgis-blog/products/arcgis-enterprise/3d-gis/creating-3d-web-apps-in-arcgis-online-tracking-hurric… The article also directs you to the Esri help page for creating 3-D apps from scenes. It is unclear specifically what you need help with other than general guidance that you could find in tutorial videos. If you have a more specific question perhaps we could be of more help?

‎11-06-2018

First off, are you the owner of the group? If so... From the group page -> Members Tab: When you click "Invite Users", have you unchecked "Only search for members in [organization name]"?

‎11-06-2018

Nicole, I get the same results when I open your map, so it's not just your machine/internet connection, etc. I also had this same issue working with a large parcel layer. I tried the same things you did, optimizing the layer, rebuilding spatial index, etc but it didn't help much. What I did was rather than have the default view of the map zoomed out to view the entire county, I zoomed in to a section of it so it didn't have to draw as many parcels on start up. Then I just instructed people who were using the app that they probably would not see all of the parcels if they zoomed out too far. Not the best workaround, but I was not able to find any other solution. The only way I could get all of the parcels to render was in ArcMap, or if we downloaded the map for offline use in Collector. I had some people suggest creating a tile layer from the feature layer to help with faster rendering, but that didn't work for me because I needed the layer to be a hosted feature layer with querying and editing capabilities. However, if you only need it to be "view only", this option could possibly help you. Anyway, not much help, I know, but just wanted to say that you're not alone. I'd be curious to see what other suggestions people have. Best of luck! -Katherine

Online Status	Offline
Date Last Visited	a week ago

My Ideas

Latest Contributions by Katie_Clark

Georeferencing bugs in ArcGIS Pro

Re: Referencing other Survey entries in a Smart Form

Referencing other Survey entries in a Smart Form

Re: ERROR 001270: Consolidating the data failed.

Re: Edits not saving in Hosted Feature Layer

Re: "Layer not drawing in AGOL"

Different formats for time field in Survey123

Re: Change military time display in record table

Re: "Layer not drawing in AGOL"

Re: Survey123 - Time isn't displaying in EST after submitting

Re: Pie Chart Operations Dashboard

Change military time display in record table

Re: Steps to configuring and extending a webapp using Web AppBuilder.

Re: How to add user outside my organization?

Re: AGOL layer does not draw

Re: Create Features Template Visible on Attribute ...

Re: Alphabetically sort domain lists when over 500...

Re: Add GUID field to existing AGOL Survey123 feat...

Re: Auto-populate unique ID field in hosted featur...

Re: Deleting Fields on a Hosted Feature Layer (AGO...

GIS Jobs