Latest Contributions by JaySandhu

Ok. What you want is the connectivity matrix of the network graph and the edge costs. You can generate that by using some VBA that I list below. To use this, add the network dataset to ArcMap. Make sure to change the name of the attribute name (in this case I have it as meters) to the one that is in your data. The run it in the VBA. The immedate window will show the results. You can re-format the debug.print lines (change them to write to a file) as needed. The output will currently look like this: Junction: 1 is adjacent to: 1 junctions. Adjacent Junction: 2 Length 235.7 Junction: 2 is adjacent to: 3 junctions. Adjacent Junction: 1 Length 235.7 Adjacent Junction: 4 Length 470 Adjacent Junction: 6287 Length 287.8 Regards, Jay Sandhu Public Sub List_Adjacent_Junctions() On Error GoTo eh   Dim pMxDoc As IMxDocument   Set pMxDoc = ThisDocument     Dim pNLayer As INetworkLayer   Set pNLayer = pMxDoc.FocusMap.Layer(0)     Dim pND As INetworkDataset   Set pND = pNLayer.NetworkDataset     Dim pNQ As INetworkQuery   Set pNQ = pND       Dim pEnumNE As IEnumNetworkElement   Set pEnumNE = pNQ.Elements(esriNETJunction)       Dim pNEdge As INetworkEdge   Set pNEdge = pNQ.CreateNetworkElement(esriNETEdge)   Dim pNEFromJunc As INetworkJunction   Set pNEFromJunc = pNQ.CreateNetworkElement(esriNETJunction)   Dim pNEToJunc As INetworkJunction   Set pNEToJunc = pNQ.CreateNetworkElement(esriNETJunction)     Dim pNE As INetworkElement   Set pNE = pEnumNE.Next   Dim pNEJunc As INetworkJunction   Set pNEJunc = pNE     Dim i As Integer   Do Until pNE Is Nothing     Debug.Print "Junction: " & pNEJunc.EID & " is adjacent to: " & pNEJunc.EdgeCount & " junctions."     For i = 0 To pNEJunc.EdgeCount - 1  'For each connected edge...       pNEJunc.QueryEdge i, True, pNEdge   'Get that connected edge       pNEdge.QueryJunctions pNEFromJunc, pNEToJunc  'Get To junction of current edge       Debug.Print " Adjacent Junction: " & pNEToJunc.EID & " Length " & pNEdge.AttributeValueByName("Meters") 'List the adjacency     Next     Set pNE = pEnumNE.Next   Loop   Exit Sub eh:   MsgBox "Error: " & Err.Description End Sub ... View more

You start of by saying that you want the distance between two cities and then it is not clear from your post what you need to generate. Can you elaborate on what is "link length" as opposed to "shortest distance" that the OD Cost Matrix generates? OD Cost matrix generates the shortest path distance (route over the network) between the sets of origins and destinations. Not sure what other distance you need. Please elaborate. Jay Sandhu ... View more

Take a look at this resource to add the traversal result (every edge that makes up the path) and then use it to select the source edges you want. http://help.arcgis.com/en/sdk/10.0/arcobjects_net/conceptualhelp/index.html#//000100000245000000 Jay Sandhu ... View more

Your attached zip file cannot be downloaded as it says it's corrupt. If the Stop properties are null, then you need re-load your Stops. But when you do that, on the Load Locations dialog, make sure to map the time window fields and then open the Stops attribute table to see that the values have been set. Jay Sandhu ... View more

Your screen shots for the attribute tables for bb show the TWStart1 and TWEnd1 are on the point feature class. BUT, do you load these values to the Stops when you do Load Locations? That is, open the attribute table for Stops and see if these values are set on the Stops TimeWindowsStart and TimeWindowsEnd columns. If they are not set then you need to reload your stops by maping these fields when you do load locations so that the values load in. Regards, Jay Sandhu ... View more

Given your setup, the path should start at 8:00 AM, get to the middle stop a short while later and then depart at 9:00 AM and end the path at the third stop around 9:03 AM. So can you double check that the ending time on the third stop is 9:03 and not 8:03 Also, can you bring up the properties of the middle stop and check that the time windows start and end are set to 9:00 AM and 10:00 AM? Jay Sandhu ... View more

Did you bring up the properties of the Route layer and turn on the "Use Start Time" and set a start time as well as turn on the "Use Time Windows" option? Jay Sandhu ... View more

Well, the service area solver starts from a point location. But you could turn your line into points, i.e., either by selecting all the junctions that lie under the line and also add the line end points and then run a service area from multiple points but with the option to "Merge by break value". This will generate multiple service area polygons and then merge them together. Jay Sandhu ... View more

Have you used the Service Area solver in Network Analyst? If you have and are not happy with the polygons it generated, you can bring up the properties of the service area layer and on the Line Generation tab, turn on the Generate Lines option and you will get the road lines that make up the service area from which the polygon is derived. Jay Sandhu ... View more

You do need a time attribute for using VRP. The formual you used is fine but you need to qualify it for the various types of road times (not just use 25 MPH for all roads). But let me ask you a question: any reason why you are using Tiger data? Why not use the streetmap data that comes with ArcGIS on the data and maps dvd. It will be better than Tiger and has a time attribute built in. Regards, Jay Sandhu ... View more

From your description it sounds like the orders are not located where they should be. This can happen if you had previously located them on another network and saved them and re-loaded to a new network. That is, network location fields get populated and used next time when you use Load Locations (you can choose use geometry option to avoid this problem). The way to fix this is to right-click the orders in the NA Window and choose "Recalculate Location Fields" All option. You can do the same with the Depot and then re-solve. Regards, Jay Sandhu ... View more

On the network locations tab, you can un-check the sources that you do not want to locate on. By default they are all checked on (except for the system junctions). Jay Sandhu ... View more

You will have to do three solves with each solve setting the impedance attribute as you need and then sum up the distances from the three solves. One route solve can only honor one setting. As far as loading locations, you have a lot more control besides the first and closest by using he build query option (right-click on one of the sources in the network locations tab to bring this up). You can read more about it here: http://help.arcgis.com/en/arcgisdesktop/10.0/help/index.html#/What_are_network_analysis_objects/00470000003n000000/GUID-9722833A-C61D-4E66-87CD-796A8A7231A1/ Jay Sandhu ... View more

Martin, You can get some more information on the algorithms from the online help: http://help.arcgis.com/en/arcgisdesktop/10.0/help/index.html#/Algorithms_used_by_Network_Analyst/004700000053000000/ Regards, Jay Sandhu ... View more

You can do this with the Network Analyst extension of ArcMap. The Route solver with the option to reorder stops to find the optimal order will give you the best way to visit the stops. Since you do not have a network and it is an open area, then you will have to create a network to make the Network Analyst work. Use the fishnet tool (in ArcToolbox) to create an appropriate sized grid feature class to cover the area and then create a network dataset on it to use for routing. I would suggest going through the Network Analyst Tutorials to get more familiar with these tools. Regards, Jay Sandhu ... View more