Latest Contributions by DEAF_PROBERT_68

Yes I am aware. it can be anything that you can use to georeference such as PDF, TIFF, JPEG, etc

I used a lot of PDF recently and add them to ArcGIS Pro 3.3.6 and it was fine for me... Once I save the control points, I then export to a new TIFF to a known project folder . I add them to my Map View and it overlay correct ... I do not know what you situation was but could you please show the screenshot and it will help us to see the problem...... BTW, When you save the control points, your world file may be saved somewhere in your folder... so if you forgot where they came from then that might be the reason why it disappears.

‎08-08-2025

Never mind. I post the same question on their FME Community forum and got an answer back; however, I had found that a transformer to make it work the line smoother and it worked.

‎08-06-2025

I am working on to getting my arc segments in FME to ArcGIS Pro but it is causing the segements to break up zigzag . The arc segments were done by a autocad user and they are in DWG.... Results after saved to a new DWG shows this : Has anyone had any luck using arc segements preserved to lines in ArcGIS Pro ? It is possible there are might others may have the same sitution.

‎08-04-2025

I have been really busy with other project but I do have a question for you . The dwg we have is from a Autocad person. So When I add this dwg to my Pro and it ends up in North Iowa. However, the Projection and the Extent do not make any sense to me The Problem it was assigned to : Projected Coordinate System NAD 1983 StatePlane Colorado Central FIPS 0502 (US Feet) Projection Lambert Conformal Conic WKID 2232 Previous WKID 102654 Authority EPSG My only simple question is how do I change the extent of the Top, Bottom, Left and Right to the Boundary Box of the Area of Interest rather than to have change or assigned to the Projection for that area ? The intend to the area of Area of Interest (Shown here in box ) Since it is in DWG file and there is no way to change the boundary to the Area of Interest ( black box), I am aware that I have to use the CAD Data menu and georeference it and assign a new world file..... Can you help me understand how it works ? I googld about DWG that has in the wrong location and how to assigned them... Also, I change the coordinate system in the Map Properties to Unknown and it ends up in near Mecca, Saudi Arabia . Thanks !

‎07-30-2025

Never mind ! Problem solved. I had to use FME Data Inspector to make it work ! Now all is good !

‎07-30-2025

Hi, Anyone out here that know how to force my CAD to assigned Coordinate System Name and Coordinate System Description in the Properties in the Drawing at the Content list ? Even though in the General and the Spatial Reference it says it is in NAD 1983 UTM Zone 13N fine. and the Validate Position is in corrected Assigned and Model Extent too

‎07-28-2025

Hello GIS friends whereever you are ! I have an issue with this DWG file that tells me it is in NAD_1983_StatePlane_Colorado_Central_FIPS_0502_Feet however, it is showing up in North Iowa . How can I change this projection back to NAD 1983 UTM Zone 13N (26913) What is the procedure for this since the State is actually in feets and our projection is in meters ? Thanks

‎07-21-2025

Hello ! Have a question . I have been doing a lot of CAD files that was done in 2023 and has a different projection. So I have to use FME Data Inspector and Workbench 2024.1.1 on some of the CAD files However, some of the CAD I worked on I had to change the projection to UTM 13N and took out the world file. I would Validate Position and the first part at the top of the Current Status that I have assigned coordinatate marked in blue color which means it is already assigned. Then Send the CAD files to the Map and test it to overlay with the polyline and save the world file. So when I went back to the Validate Position again and see it said No Project address found in this model ? Here it is a screenshot... Do I need to fix it or is it just good enough and move on ? Currently using ArcGIS Pro 3.3.6

‎07-17-2025

Hey I have not heard anything from you guys ? And oh They are at ESRI UC !!!! ha ha

‎07-08-2025

So I am experiment and write a step by step for a co-worker and here I have a problem with layer that has the wrong projection.... So, basically what I am trying to do here is to a copy and paste the gegoraphic coordinates Look at the screenshot ... Open the Layer's Properties Click on the source and to the far right there is a Copy button that you want to copy the extent of the geographic coordinates Closed the Layer Properties Then go back to the layer and right click to Export the Data Features At the top of the Export Features. Double Click on the Environments Go down to the Processing Extent . Click on the Copy/Paste Button and then choose "Paste Extent" So what I see here is it did not copy and paste to this Hmmmmmm..... So my question is Why did it not copy and then paste into the X and Y ? I am using ArcGIS Pro 3.3.6 and Has it been update to correct this problem to the new version 3.5 ? Thanks !

‎07-02-2025

Hey... See if you can recover it through your Windows Exploerer either in 10 or 11 and find the geodatabase where it was located. In that folder, right click there and in the Properties see if you have Previous Versions ?

‎07-01-2025

ESRI has their own ArcGIS Code Sharing on their online Here is the link : https://codesharing.arcgis.com// I wonder if this site will be maintanince as we move on from the old ArcMap and past version. I wonder if this will be closed and move to a new website for the ArcGIS Pro ? With so many old ones that no longer working , obsolete , deprecated and some tools, addin, or python may work ... I would like to know curious will there be a update or migrate some to the new website ? Thanks !

‎06-25-2025

Ahhhhh, I am in 3.3.6 version . Thanks @JonM32 !!!!

‎06-25-2025

May I throw an idea for the future in ArcGIS Pro new version . When you are working in Pro, and I am not sure if others have suggest an idea or not but here am I. In the Map tab and when you have a symbology that you want to turn off or on and see what you are working or not whatever.. I have an idea that can I suggest you to add. Highlight a layer and then in the Drawing section and click on Symbology. Problem when you open it and I see no way around to turn it off or on .

Online Status	Offline
Date Last Visited	Tuesday

My Ideas

Latest Contributions by DEAF_PROBERT_68

Re: Pro 3.3 georeferenced image disappears

Re: Pro 3.3 georeferenced image disappears

Re: Using FME to save selected layer cause zigzag in ArcGIS Pro ?

Using FME to save selected layer cause zigzag in ArcGIS Pro ?

Re: From State Plane projection to UTM Zone 13N Question

Re: File Properties for CAD Question

File Properties for CAD Question

From State Plane projection to UTM Zone 13N Question

Validate Position in CAD Question ?

Re: Copy and Paste Button in between Dialog Boxes Question ?

Copy and Paste Button in between Dialog Boxes Question ?

Re: Deleted files from my geodatabase. Is there a way to recover them?

Coding Share Update Question.

Re: Drawing Symbology turn on or off in ArcGIS Pro Symbology Pane ?

Drawing Symbology turn on or off in ArcGIS Pro Symbology Pane ?

Re: File Properties for CAD Question

Re: Export PDF failed in the Layout issue

Re: Simple Line for Label is showing up ?

Add coordinate sytems Listing on the Table of Cont...

Learning ArcGIS in the "Get started with Python in...

Cartography and Maps

Drones, UAVs, UAS, and RPAs