POST
|
Hi guys, I am deploying ArcGIS Enterprise 10.2 on Azure Kubernetes (v1.28.3) using Helm Charts v1.2.0. If i unpack the chart (*.tgz), set the variables in configure.yaml and values.yaml files, and then run it directly using helm everything works fine. However, this does not work sometimes, when using the Terraform Helm Provider. I have it pointing directly to the *.tgz chart file and setting the variables dynamically. I know the variables are properly set and this in fact works sometimes. Error: helm_release.arcgis: Creating... helm_release.arcgis: Still creating... [10s elapsed] helm_release.arcgis: Still creating... [20s elapsed] helm_release.arcgis: Still creating... [30s elapsed] helm_release.arcgis: Still creating... [40s elapsed] helm_release.arcgis: Still creating... [50s elapsed] ╷ │ Warning: Helm release "arcgis" was created but has a failed status. Use the `helm` command to investigate the error, correct it, then run Terraform again. │ │ with helm_release.arcgis, │ on helm-arcgis.tf line 1, in resource "helm_release" "arcgis": │ 1: resource "helm_release" "arcgis" { │ │ Error: failed pre-install: 1 error occurred: │ * job failed: BackoffLimitExceeded │ with helm_release.arcgis, Details: I can see that the pod that fails e.g. arcgis-pre-install-hook-job-xss8n with the following details: ...
Waiting for pods to startup...
POD STATUS
arcgis-ingress-controller-9cb458d7-spkgk Running
arcgis-help-557765bcc5-kdh4s Running
arcgis-rest-administrator-api-84cc8d9b86-mmqk4 Running
arcgis-enterprise-manager-6c67864b47-hgbh9 Running
Waiting for site availability..............................Ready
-------------------------------------------------------------------------------
S U C C E S S !
-------------------------------------------------------------------------------
ArcGIS Enterprise 11.2 on Kubernetes 11.2.0.5207 has been successfully deployed.
Create the ingress or OpenShift route resource now, if you have not done so yet.
The secure route should direct traffic to the arcgis-ingress-nginx service
using either re-encrypt or passthrough for TLS termination.
If using a DNS alias, you should create a CNAME record that resolves
the DNS alias to the canonical router hostname for the cluster.
Use the following URL to access the ArcGIS Enterprise 11.2 on Kubernetes
Setup Wizard and configure your organization:
https://myapp.cloud.mywebsite.co.nz/arcgis/manager
Use this URL to access ArcGIS Enterprise 11.2 on Kubernetes help:
https://myapp.cloud.mywebsite.co.nz/arcgis/help/en/
------------------------------------------
Waiting for enterprise URL...
------------------------------------------
Waiting 900 seconds for https://myapp.cloud.mywebsite.co.nz/arcgis/admin...
Connection successful.
HELM_CONFIGURE=true
------------------------------------------
Running configure...
------------------------------------------
Properties for /tmp/decoded-configure.properties:
HELM_DEPLOY=true
K8S_NAMESPACE="arcgis"
ARCGIS_SITENAME="arcgis"
ARCGIS_ENTERPRISE_FQDN="myapp.cloud.mywebsite.co.nz"
CONTEXT="arcgis"
ROOT_ORG_BASE_URL="https://${ARCGIS_ENTERPRISE_FQDN}/${CONTEXT}/"
SYSTEM_ARCH_PROFILE="development"
# Hard-coded
LICENSE_FILE="/tmp/license.file.json"
LICENSE_TYPE_ID="creatorUT"
ENCRYPTION_KEYFILE=""
ADMIN_USERNAME="portaladmin"
ADMIN_PASSWORD="somepassword"
ADMIN_EMAIL="my_email@org.co.nz"
ADMIN_FIRST_NAME="Jose"
ADMIN_LAST_NAME="De Sousa"
SECURITY_QUESTION_INDEX=1
SECURITY_QUESTION_ANSWER="Esri"
# Hard-coded
CLOUD_CONFIG_JSON_FILENAME=""
LOG_SETTING=""
LOG_RETENTION_MAX_DAYS=""
RELATIONAL_STORAGE_TYPE="DYNAMIC"
RELATIONAL_STORAGE_SIZE="16Gi"
RELATIONAL_STORAGE_CLASS="arcgis-managed-premium-delete"
RELATIONAL_STORAGE_LABEL_1=""
RELATIONAL_STORAGE_LABEL_2=""
OBJECT_STORAGE_TYPE="DYNAMIC"
OBJECT_STORAGE_SIZE="32Gi"
OBJECT_STORAGE_CLASS="arcgis-managed-premium-delete"
OBJECT_STORAGE_LABEL_1=""
OBJECT_STORAGE_LABEL_2=""
MEMORY_STORAGE_TYPE="DYNAMIC"
MEMORY_STORAGE_SIZE="16Gi"
MEMORY_STORAGE_CLASS="arcgis-managed-premium-delete"
MEMORY_STORAGE_LABEL_1=""
MEMORY_STORAGE_LABEL_2=""
QUEUE_STORAGE_TYPE="DYNAMIC"
QUEUE_STORAGE_SIZE="16Gi"
QUEUE_STORAGE_CLASS="arcgis-managed-premium-delete"
QUEUE_STORAGE_LABEL_1=""
QUEUE_STORAGE_LABEL_2=""
INDEXER_STORAGE_TYPE="DYNAMIC"
INDEXER_STORAGE_SIZE="16Gi"
INDEXER_STORAGE_CLASS="arcgis-managed-premium-delete"
INDEXER_STORAGE_LABEL_1=""
INDEXER_STORAGE_LABEL_2=""
SHARING_STORAGE_TYPE="DYNAMIC"
SHARING_STORAGE_SIZE="16Gi"
SHARING_STORAGE_CLASS="arcgis-managed-premium-delete"
SHARING_STORAGE_LABEL_1=""
SHARING_STORAGE_LABEL_2=""
PROMETHEUS_STORAGE_TYPE="DYNAMIC"
PROMETHEUS_STORAGE_SIZE="30Gi"
PROMETHEUS_STORAGE_CLASS="arcgis-managed-premium-delete"
PROMETHEUS_STORAGE_LABEL_1=""
PROMETHEUS_STORAGE_LABEL_2=""
-------------------------------------------------------------------------------
Running Validation Checks...
-------------------------------------------------------------------------------
Checking operating system...
Checking property values...
Checking architecture profile...
Checking organization URL...
Error validating organization URL: https://myapp.cloud.mywebsite.co.nz/arcgis/admin
Error code from server: 502
Check your properties file for valid CONTEXT and ARCGIS_ENTERPRISE_FQDN.
ERROR: Failed to validate organization URL.
ERROR: Configure from helm failed Note that when the configuration starts it knows it is meant to wait for 15 minutes (900 seconds) in case the admin URL is not yet available. As you can see from above, the admin URL is available (it becomes available in few seconds) and the code proceeds. Later on, it runs the validation checks and the same admin URL somehow now fails to validate? I have also set these two variables just in case, originally I had only configureWaitTimeMin as per the documentation, but this never worked. "install.configureWaitTimeMin" = "15" "install.validationTimeout" = "900" Adding the second line makes it work but is still random. Sometimes it works sometimes it doesn't. Any ideas about what is happening? Thanks, Jose (Esri NZ)
... View more
02-11-2024
10:43 PM
|
0
|
3
|
351
|
POST
|
Hi guys, We are using the ArcGIS Javascript API 4.x Sketch control and we have noticed that it is built using the new Esri calcite design style. Questions: 1. How can we change the buttons of each tool to be rounded on your default sketch sample? https://developers.arcgis.com/javascript/latest/sample-code/sandbox/?sample=sketch-geometries 2. Is this the style pattern that all widget controls will follow going forward or is this just an exception? We have noticed that all other controls don't follow the same approach. Cheers, Jose
... View more
10-18-2021
09:07 PM
|
0
|
2
|
604
|
POST
|
Hi Rene, I don't have fonts on my server, and I do not control some of the web apps deployed which all point to the same web map. We'll remove tahoma from the web map and I'll mark this post as answered (though extended to all feature services not just hosted), but again, it would be nice if Pro would block maps from being published with unsupported font types. Thanks for taking the time to reply. Cheers, Jose
... View more
09-12-2020
04:50 PM
|
0
|
1
|
1873
|
POST
|
Hi Rene, The service is not from a hosted feature service it is a full blown feature service and it does include a layer which is using Tahoma. The design team has published the web map this way from Pro. For consistency purposes, if Tahoma is not supported for feature services, the validation tool in Pro should clearly state this and not let the map get published. It just confuses everyone. Thanks for replying to the post. Cheers, Jose
... View more
09-08-2020
08:07 PM
|
0
|
4
|
1873
|
POST
|
Hi guys, When consuming a web map with few feature services there, i keep getting this error in all our web apps which includes a range of both the ArcGIS JS 3.x API and the 4x API. Can you have a look and fix this? It should be a quick fix. https://static.arcgis.com/fonts/tahoma-regular/0-255.pbf This URL does not seem to be available ... and the JS API keeps logging this error. So you either make it available or handle it better in the JS API. Cheers, Jose
... View more
09-06-2020
03:52 PM
|
0
|
6
|
2359
|
POST
|
Hi, When will Esri release a beta for the ArcGIS Quartz for UWP? When is this expected to be completed? In addition, I really enjoyed the ArcGIS Portal Viewer for the Windows Store that has been made available in GitHub. I am also very happy that the source code was made available to us. However, I was wondering if Esri plans to upgrade this viewer for the UWP and if this will come with the release of the Quartz for UWP. I would be very happy if Esri decided to port the existing viewer to UWP and that more functionality was added into the builder. Having the viewer available in github is great as we would be able to fork, clone and leverage the application. We could then re-deploy in the Windows Store to suit our own requirements. In time, we could also contribute with more controls to the platform. Please update the Viewer for UWP it is a really great addition. Many thanks, Jose Sousa
... View more
03-08-2016
02:05 AM
|
0
|
2
|
5566
|
Online Status |
Offline
|
Date Last Visited |
a week ago
|