POST
|
Hi, I have a issue, where my graphics in graphics overlay are blinking at random intervals. say in graphics i am using picture marker symbol. and the images of those picture marker symbols will get updated for every second. say i have 5 graphics with different images and these graphics will be updated every second(all 5) with same images as assigned. then after some time like 10 seconds. one graphic will blink and after some time other will blink randomly. There will be a gap of around 4 to 8 seconds for blinking randomly, so till that 4 to 8 seconds no symbol/ graphic will blink. then afterwards it will blink for once and it will be fine after some time and it happens randomly. Arcgisruntime .net is being used. tested in i7 gtx 1080 16GB RAM, i9 rtx 2060 32GB RAM - both are Dell .
... View more
10-20-2020
01:45 AM
|
0
|
1
|
603
|
POST
|
How to create a view shed geopackage from arcgis Pro 2.4, that supports arcgis runtime(by package Result). The o/p of the package should be in the feature set but not the raster layer. I would like to have the step by step guide if possible for creation of viewshed At earlier i have created a package where it takes only input points and doesnot take any elevation source, the o/p is feature set but when i convert it in to geopackage it is around 60kb and when implementing in runtime it gives error {"Failed to create service viewshed457 GPServer. Worker process 'viewshed457_host' exited while attempting to service request (attempt 1 of 1): endpoint='admin' headers={} params={filePath=d:\\viewshed457.gpkx, jobDir=C:\\Users\\sharansai.g\\AppData\\Local\\Temp\\arcgisruntime_16592\\viewshed457\\jobs, maxRecords=1000, name=viewshed457, outputDir=C:\\Users\\sharansai.g\\AppData\\Local\\Temp\\arcgisruntime_16592\\viewshed457, type=GPServer, virtualDir=http://127.0.0.1:50000/pK5bKP/outputdir/viewshed457} res='create' post=0 Crash dump path=C:\\Users\\sharansai.g\\AppData\\Local\\Temp\\ArcGISRuntimeErrorReports\\arcgisruntime_100.5.0.2381_service_20191121_050027.dmp"} Regards G N Sharan Sai
... View more
11-20-2019
08:58 PM
|
0
|
0
|
305
|
POST
|
Hi, I have created a geopackage using Military tools in arcgis, the geopackage i have created is RLOS(Radial Line of sight). I would like to get this package and perform operation in arcgis runtime. when i converted the package to support arcgis runtime and run it. i was facing the following error "Job failed. Job error 22 User defined failure. Error while handling execute geoprocessing task. Job error 400 Unable to complete operation. Error executing tool. Radial Line Of Sight : ERROR 000816: The tool is not valid." Is there any way so that i can add the Military Tools in arcgis pro to the runtime local server. I have added military tool for arcgis, addin in the arcgis pro
... View more
11-20-2019
02:13 AM
|
0
|
0
|
421
|
POST
|
Hi Mike, I have just tried Every Possible way and got struck with placing the input parameters INPUT PARAMETERS DEM (RASTER IMAGE)->Has ELEVATION DATA Points-> AS A FEATURE Output MAP IMAGE LAYER or Feature Set Is there any sample example with software using ArcGIS PRO 2.4 and creating Package for ArcGIS RUNTIME for ViewShed On 2D Maps Thanks and Regards G N Sharan Sai
... View more
11-19-2019
10:29 PM
|
0
|
0
|
717
|
POST
|
Hi, I just Resolved the Issue, The problem is i have mentioned the service type as GeoprocessingServiceType.AsynchronousSubmitWithMapServiceResult But it should be GeoprocessingServiceType.AsynchronousSubmit Thanks for the documentation Regards G N Sharan Sai
... View more
11-19-2019
10:20 PM
|
0
|
0
|
668
|
POST
|
Hi, I was able to create a geopackage of Observer Points and provide arcgis runtime support. While creating in ArcGIS Pro i have provided the inputs a raster image and Feature Points. Now i am trying to run this package with arcgis runtime localserver, it has asking the Observer Point Features in GPString. // Create a new feature collection table based upon point geometries using the current map view spatial reference FeatureCollectionTable myInputFeatures = new FeatureCollectionTable(new List<Field>(), GeometryType.Point, MyMapView.SpatialReference); // Create a new feature from the feature collection table. It will not have a coordinate location (x,y) yet Feature myInputFeature = myInputFeatures.CreateFeature(); // Assign a physical location to the new point feature based upon where the user clicked in the map view myInputFeature.Geometry = location; // Add the new feature with (x,y) location to the feature collection table await myInputFeatures.AddFeatureAsync(myInputFeature); // Create the parameters that are passed to the used geoprocessing task GeoprocessingParameters myViewshedParameters = new GeoprocessingParameters(GeoprocessingExecutionType.SynchronousExecute) { // Request the output features to use the same SpatialReference as the map view OutputSpatialReference = MyMapView.SpatialReference }; // Add an input location to the geoprocessing parameters myViewshedParameters.Inputs.Add("in_observer_point_features", new GeoprocessingFeatures(myInputFeatures)); myViewshedParameters.Inputs.Add("in_raster", new GeoprocessingString(@"D:\ArcGISPro\ArcGISPro\Documentation\Files\Maps\IndiaMap\gt30e060n40.tif")); The above code is where i have creating the feature points from the mouse tap event. and storing it in a feature class. Please provide a way where i can transfer these Features as a string as the Geopackage input type is GPString. Regards G N Sharan Sai
... View more
11-19-2019
10:12 PM
|
0
|
1
|
941
|
POST
|
Hi, Thanks I will be looking into it. Regards G N Sharan SAI Get Outlook for Android<https://aka.ms/ghei36>
... View more
11-19-2019
08:01 AM
|
0
|
0
|
656
|
POST
|
Hi, I would like to have Viewshed analysis to be performed offline. As the example provided in the Guide is online Analyze viewshed (geoprocessing) | ArcGIS for Developers The link above gives the online interaction and it works fine when i have started using it. But when i have created a geopackage of viewshed and added in place of it, i was facing the error. {"Failed to create service viewsheddata GPServer. Worker process 'viewsheddata_host' exited while attempting to service request (attempt 1 of 1): endpoint='admin' headers={} params={filePath=d:\\viewsheddata.gpkx, jobDir=C:\\Users\\sharansai.g\\AppData\\Local\\Temp\\arcgisruntime_17272\\viewsheddata\\jobs, maxRecords=1000, name=viewsheddata, outputDir=C:\\Users\\sharansai.g\\AppData\\Local\\Temp\\arcgisruntime_17272\\viewsheddata, type=GPServer, virtualDir=http://127.0.0.1:50000/YBVrZ6/outputdir/viewsheddata} res='create' post=0 Crash dump path=C:\\Users\\sharansai.g\\AppData\\Local\\Temp\\ArcGISRuntimeErrorReports\\arcgisruntime_100.5.0.2381_service_20191119_115042.dmp"} This was the Error. Please solve the issue Thanks and Regards G N Sharan Sai
... View more
11-19-2019
03:54 AM
|
0
|
2
|
760
|
POST
|
Hi, I was able to get the data from the localserver in the form of featureset, but i need to display it on the map view. The data result is in the form of featureset. Pls do provide me help in displaying featureset data onto the mapview
... View more
11-19-2019
01:35 AM
|
0
|
2
|
706
|
POST
|
Hi, + $exception {"Failed to create service rajasthan GPServer. Service failed to initialize: GPMapServerObject IObjectConstruct::Construct hr=0x80004005 The system cannot locate the resource specified.\r\n\n The system cannot locate the resource specified.\r\n"} Esri.ArcGISRuntime.Http.ArcGISWebException I was unable to run the geopackage created using arcgis pro 2.4, The following was the error. In arcgis pro it was made sure that arcgis runtime support is checked. If i run a sample package of contour.gpk it is quite good.
... View more
11-18-2019
10:32 PM
|
0
|
2
|
719
|
POST
|
Hi Charles I have opened the meta data but in that table "readonly" is not available. Please provide me any suggestion to resolve the issue. I dont even have dictionary configuration and dictionary script. Regards G N Sharan Sai
... View more
11-18-2019
08:15 PM
|
0
|
1
|
1679
|
POST
|
Hi Uma Harano I was struck with the problem, I don't know how to change the editable property from readonly value to false as mentioned in this below mentioned article. https://github.com/Esri/dictionary-renderer-toolkit/blob/master/docs/add-a-new-identity-to-MIL-STD-2525C.md Esri/dictionary-renderer-toolkit The Dictionary Renderer Toolkit provides documentation and tools for the creation of custom dictionary styles for use with the dictionary renderer. - Esri/dictionary-renderer-toolkit github.com The point is mentioned in the Create a custom dictionary point no 4. Software using DB browser for SQLite Thanks and Regards G N Sharan Sai
... View more
11-17-2019
10:14 PM
|
0
|
4
|
1679
|
POST
|
Hi, As I mentioned the earlier example, i just used the complete code and replaced tpk with mmpk G N sharan SAI Get Outlook for Android<https://aka.ms/ghei36>
... View more
11-14-2019
07:55 AM
|
0
|
1
|
862
|
POST
|
Hi, Yes instead of using rasterhillshade.tpk I am using india.mmpk Is there any other example on geoprocessing with complete file. Hoping for solution Regards G N Sharan SAI Get Outlook for Android<https://aka.ms/ghei36>
... View more
11-14-2019
07:15 AM
|
0
|
3
|
862
|
POST
|
After start of geprocessing service, I was facing this type of error. The example of code is taken from Local server geoprocessing | ArcGIS for Developers in .xaml.cs file // Create a map image layer to show the results ArcGISMapImageLayer myMapImageLayer = new ArcGISMapImageLayer(new Uri(gpServiceResultUrl)); // Load the layer await myMapImageLayer.LoadAsync(); at await myMapImageLayer.LoadAsync(); it was getting load error "unknown operation:Get Mapserver/jobs/j89.... please resolve the issue Michael Branscomb
... View more
11-14-2019
04:03 AM
|
0
|
5
|
896
|
Online Status |
Offline
|
Date Last Visited |
11-11-2020
02:24 AM
|