POST
|
Sorry that might help! Have the latest version of ArcGIS Pro & Desktop, advanced + all extensions on Desktop only. Thank you so much for any help you can offer! Dan Patterson
... View more
08-05-2018
06:31 AM
|
0
|
1
|
495
|
POST
|
Have a shared key field between point and line feature, could also calculate start/stop x and y. Is it possible to batch move my lines?
... View more
08-04-2018
10:12 PM
|
0
|
3
|
596
|
POST
|
ArcMap 10.6 Trying to use the tool,add attachments, keep getting the Error "Cannot open File D:\Pictures_...\filename" Have generated match table The path name is correct, the match field is correct Have been at this for hours. Successfully used this tool last week, no problems. Any help is greatly appreciated!!
... View more
07-26-2018
01:03 PM
|
0
|
2
|
2285
|
POST
|
Cheryl thank you for the response! I have seen the different options for subdivision. I drew up a quick paint sketch to better explain: It may be that what I am asking is not possible. From my understanding the streets (red) must close loop for blocks to be auto-generated. The drawing I've attached shows that I do not have a closed loop street. The issue I am having is that I want blocks to be created within the polygon (black) and have the street honored, so that when I choose skeleton geometry, all blocks will line up with the street. When trying this, blocks (blue) were splitting across the street (pink oval), instead of the full block being on one side of the street or the other. My polygon is a shape, and not part of the street network. I was also getting double blocks on the southern portion, where they would not have street access (yellow oval). If the polygon subdivision honored the streets, blocks should only show where street access is available (i.e. their fronts align with street). Lastly, I am trying to sort out how to assign an obstacle (green rectangle), so this portion would not be included in subdivision. Any suggestions in the right direction are very much appreciated! I know that's a lot, so definitely understand if it's just too much. I am very grateful for all your help!
... View more
07-23-2018
06:52 AM
|
0
|
1
|
1398
|
POST
|
Thank you! Missed that comment I may contact them if unable to sort it out for myself- very much new to CityEngine. Got time for one more question? I've been struggling with trying to figure out how to subdivide a polygon that includes some streets, but the streets do not go all the way around the polygon (not a closed loop). As in a way to link the polygon with the drawn streets, so that when subdivided, the streets are honored. Thanks again for all your help!! I will keep making my way through videos & tutorials
... View more
07-20-2018
08:54 AM
|
0
|
3
|
1398
|
POST
|
Thank you Cheryl! I have previously looked over the rules you mentioned. I am looking for something similar to what is mentioned in this video Webinar: 3D Planning with SketchUp and CityEngine - YouTube They implement a cga that uses block size to generate a building, along with landscaping too it appears.
... View more
07-19-2018
08:59 AM
|
0
|
6
|
1398
|
POST
|
Is there a location to find cga rules? Like those for generating buildings?
... View more
07-19-2018
06:56 AM
|
0
|
1
|
1857
|
POST
|
Have seen users with something similar in youtube videos, but unable to locate anything worthwhile. Looking mainly for residential. Finding it hard to locate cga rules altogether.
... View more
07-18-2018
08:12 PM
|
0
|
8
|
1689
|
DOC
|
Anthony, could you please share your full updated script? I would love to try it out!
... View more
07-16-2018
06:55 AM
|
0
|
0
|
3410
|
POST
|
Afternoon All- Trying to find a way to direct the crowdsource manager to use a related table of my choosing. I have one feature and three tables related to it. Ideally, I would like to be able to view all in the Crowdsource Manager. If that is not possible, I would like to be able to choose which of the three is consumed by the application. It appears to be using the last table within the feature service. I've tried creating a new map & removing all but the table I'd like to use, but no related records showed in this case. I've downloaded the source code from github, but cannot locate anything within the code that would control these features. Any and all help is greatly appreciated, thank you!!
... View more
07-10-2018
12:44 PM
|
0
|
2
|
833
|
DOC
|
I've created the group and shared as you asked. Thank you so much! I really appreciate the help
... View more
07-06-2018
09:33 AM
|
0
|
0
|
3410
|
DOC
|
Does this tool work for ArcMap 10.6? I am getting the error "line 661, in <module> if hasrow == True: NameError: name 'hasrow' is not defined"
... View more
07-05-2018
06:29 AM
|
0
|
0
|
3410
|
POST
|
Is there a way to configure the attachments to open a Google Drive, Dropbox, or One Drive file from within the Survey123 app, as in having a choice besides just the photos on the phone? Thank you!
... View more
06-19-2018
06:20 AM
|
1
|
1
|
375
|
POST
|
Found a workable one for replicas (although would still prefer one to overwrite existing if anyone has one): from __future__ import print_function
from arcrest.security import AGOLTokenSecurityHandler
from arcrest.agol import FeatureService
from arcrest.common.filters import LayerDefinitionFilter
if __name__ == "__main__":
username = "[username]"
password = "[passwprd]"
url = "[feature service url]"
proxy_port = None
proxy_url = None
agolSH = AGOLTokenSecurityHandler(username=username,
password=password)
fs = FeatureService(
url=url,
securityHandler=agolSH,
proxy_port=proxy_port,
proxy_url=proxy_url,
initialize=True)
result = fs.createReplica(replicaName='Demo',
layers=[0,1,2],
dataFormat="filegdb",
out_path='D:\\temp')
print( result) Then I am using this one to rename the attachments as something more meaningful, otherwise they come as Photo1.jpeg, Photo2.jpeg... import arcpy, os
from collections import defaultdict
inFC = r'D:\test.gdb\INLET' # Feature Class
inTable = r'D:\test.gdb\INLET__ATTACH' # Attachment table
fileLocation = r'D:\test\TestOutput' # Output location
# Get dictionary of ObjectID and associated field value
myFeatures = dict()
with arcpy.da.SearchCursor(inFC, ['GLOBALID', 'ID']) as cursor:
for row in cursor:
myFeatures[row[0]] = row[1]
# Create dictionary to count usage of the field value (to increment files)
valueUsage = defaultdict(int)
# Loop through attachments, incrementing field value usage, and using that
# increment value in the filename
with arcpy.da.SearchCursor(inTable, ['DATA', 'ATT_NAME', 'ATTACHMENTID', 'REL_GLOBALID']) as cursor:
for row in cursor:
if row[3] in myFeatures:
attachment = row[0]
fieldValue = myFeatures[row[3]] # Value of specified field in feature class
valueUsage[fieldValue] += 1 # Increment value
filename = "{0}_{1}.jpeg".format(fieldValue, valueUsage[fieldValue]) # filename = FieldValue_1
output = os.path.join(fileLocation, filename) # Create output ilepath
open(output, 'wb').write(attachment.tobytes()) # Output attachment to file Is there a way to link the two? I think I would need to do an unzip prior to the second.
... View more
06-13-2018
12:41 PM
|
0
|
3
|
936
|
Title | Kudos | Posted |
---|---|---|
1 | 06-19-2018 06:20 AM | |
6 | 03-06-2018 09:00 AM | |
1 | 01-09-2018 07:49 AM | |
3 | 03-23-2018 11:07 AM | |
2 | 01-29-2018 02:45 PM |
Online Status |
Offline
|
Date Last Visited |
11-11-2020
02:25 AM
|