POST
|
Hey Ramon- Yes, it has been a while! That's a pretty neat idea for a wall mural. I have a contact at ARC Document Solutions and I bet he would have a pretty good idea as to what's possible on the equipment they have. If you have my contact information, just shoot me an e-mail and I'll send it your way.
... View more
04-26-2023
02:57 PM
|
0
|
0
|
533
|
POST
|
We've created wall mural maps a few times here but only at 59" x 59" and 66" x 66". I'm not sure about printing on a decal or why that would be useful, but we just generated the PDF at the desired size at around 300 dpi, then sent it off to the reprographics place. We chose to print on photo satin paper and then have it mounted on 1/2" black gator board with an attached wood hanging block mounted to the back. I think we ordered around 20 units and they all just ended up as wall art scattered across City Hall. For our particular job and printing on photo satin media, the max size available was 60" wide and anything above that size required stitching the prints together as two separate jobs and then after mounting there was a visible seam running down the middle of the mural. I'm sure there's equipment out there that prints at 8' x 8', but maybe the limitations are the available printing media that you can choose from? I would think a decal would be difficult to attach to a wall without air bubbles, but maybe this is something people do all the time. Good luck!
... View more
04-26-2023
02:29 PM
|
1
|
0
|
545
|
POST
|
After uploading an item and going to the detail page (where you can edit the thumbnail, summary and description) there is the "Terms of Use" section. A long time ago I found that you could just input the abbreviation for the license "PDDL" and when you visited the item on the Open Data / Hub page the PDDL would be a link to the terms of the license on the https://www.opendatacommons.org/ website. At some point, the Open Data Commons website updated their site structure and the ArcGIS Hub link no longer works. This page: AnnexationHistory Has PDDL link to this page: https://opendatacommons.org/licenses/pddl/summary <Error> <Code>NoSuchKey</Code> <Message>The specified key does not exist.</Message> <Details> No such object: opendatacommons.org/licenses/pddl/summary </Details> </Error> But it should be linking to https://opendatacommons.org/licenses/pddl/summary/index.html That link is automatically created just by typing in PDDL. Hopefully the right person will see this and update the backend to point to the correct page. Thanks- Trevor
... View more
05-14-2020
02:17 PM
|
0
|
0
|
269
|
POST
|
Our network guys took a look and "did something (below)". Downloading is working now, albeit somewhat slowly. Thanks Kaitlyn! We are publishing Cityworks and GIS to internet through our Load Balancer which only allows people access to these sites on port 443. One of the feature on this load balancer is called SSL off loading where processing of SSL (encrypting/decrypting of data) is handled at the load balancer to lessen the load on the web server. When we first published Cityworks and GIS to internet, we enabled SSL offloading on both Cityworks and GIS but Cityworks didn’t like SSL offloading at the load balancer so we disabled this for Cityworks. However, GIS was working fine with SSL offloading so we left that enabled at the load balancer. It looks like GIS never worked properly since we published this out to internet because SSL offloading was always on GIS. I just disabled SSL offloading on GIS.
... View more
05-14-2020
10:47 AM
|
1
|
0
|
797
|
POST
|
Hi Kaitlyn- Thanks for the response! - We're going to investigate this with our Network guys. I'll post an update when we find out more. Thanks- Trevor
... View more
05-14-2020
09:15 AM
|
0
|
1
|
797
|
POST
|
We've been using the Open Data / Hub for a while and for the last few months we are unable to get any features to actually download. Site here: City of Santa Ana - GIS Open Data We host the data on our own ArcGIS Server (ver. 6.1) here: https://gis.santa-ana.org/server/rest/services/Public In the past we were able to add these external services and the Open Data site would index them and allow people to download the features to Shapefile or File Geodatabase. This no longer works, the download button animates and acts like something is happening, but nothing ever downloads. Test layer here: Council Wards When this error was called into support, the response we received was - "This is a bug. If enough people call in about it, we might fix it." So hopefully more people will see this and notify support so they will take action. Thanks- Trevor
... View more
05-14-2020
08:03 AM
|
1
|
3
|
908
|
POST
|
I'm using the Data Interoperability extension and I'm attempting to read in a csv file that has a column with a string of coordinates in it. I've tried loading it into the Spatial ETL Tool CSV reader, using the coordinate concatenator and then the area builder. I get a rejected feature warning when I try running the tool. Can anyone offer some pointers for this?
... View more
04-08-2019
09:37 AM
|
0
|
0
|
341
|
POST
|
This was just what I was looking for. Well commented too. Great work!
... View more
11-13-2018
03:30 PM
|
0
|
0
|
318
|
POST
|
Yep, this was exactly my problem too. I would never of guessed that the images in the Layout window would cause this!
... View more
06-24-2015
10:04 AM
|
0
|
0
|
1489
|
POST
|
I built a model that does some basic selection by attributes and then refines that selection by adding other points within 500ft and then removing the originally selected point from the selection set and then it outputs everything to visible layers in the session. It works great! I get one selected point as the “lottery selection” and then I get a bunch of other points within 500ft of that are now “Invalid Selections”. I can open that layer as a table and it’s exactly what I need. Now I want to feed it MULTIPLE values for the “SQL Expression” and have it reiterate through those values one at a time and output the results of the "invalid selections" individually to an excel file. I've tried a bunch of thing but either I get ALL the records in the layer output to the individual excel files or ONLY the last result in the list over and over again in the excel files. I tried using the multivalue SQL iteration (above image) and I just couldn't get it to work. I tried switching the expression to a “list” of values and it didn't work either. Suggestions welcome!
... View more
01-21-2015
04:46 PM
|
0
|
1
|
3962
|
Title | Kudos | Posted |
---|---|---|
1 | 04-26-2023 02:29 PM | |
1 | 05-14-2020 08:03 AM | |
1 | 05-14-2020 10:47 AM |
Online Status |
Offline
|
Date Last Visited |
3 weeks ago
|