Latest Contributions by LachlanWainwright

‎01-24-2024

Hi I am experiencing the same issue where IWA is enabled and anon disabled. A potential workaround is the bypass the Web Adaptor and shoot straight to the portal server via port 7443 e.g. https://FQDN:7443/arcgis If the portal server Fully Qualified Domain Name is myserver.domain.com, then https://myserver.domain.com:7443/arcgis make sure you swap out the default /portal in the fme dialog for the /arcgis If you are running a HA portal environment then just hope the server you select is always up...... hope this helps 🙂

‎02-28-2023

Hi Thanks for the response @Felipe_Costa I checked event viewer and manually uninstalled it too. In the end I found it was my inability to search the internet properly. As I was using DSC to do the install there's a crafty little setting I have never set which basically stop DSC from trying to reinstall and reinstall. This is covered in https://github.com/Esri/arcgis-powershell-dsc/issues/394 which one of the ESRI DSC legends pointed me to (thanks Cameron K.). I made the setting change in Powershell and bingo, all is sweet, it does not keep installing. Information on the LCM setting is here V4. Getting Started · Esri/arcgis-powershell-dsc Wiki · GitHub, Dot point 1 😁 Thanks Felipe and Cameron K.

‎02-24-2023

Hi A fresh install of 10.9.1 Enterprise on Azure hosted Windows 2019 servers(3) using Powershell DSC. After it was installed, licensed and configured I ran the install option again to patch all the machines. This appeared to work without issue. But...it appears the log4j patch is in a continuous install loop. Every 15mins its installs again and restarts AGS. I uninstalled the patch via control panel and it ran again and it installed itself again. Server has been restarted etc. Does anyone know how to stop this? Thanks Lachlan

‎12-13-2022

Hi I also posted this on the poweshell dsc github and Cameron gave us instructions on what to do in our case. 2 simple steps, un-federate the AGS site and add the InternalLoadBalancer setting to the config file and run. We now have a access to Organization, Settings Thanks DSC crew and Jonathan

‎12-13-2022

Hi @JonathanQuinn We are getting the same issue with a non-ha 10.9.1 environment on AZURE that we just built with powershell dsc (no errors returned with the install, all prefect, love DSC!!). 3-machines: m1 Portal & portal/server wa's; m2 Server and m3 datastore. Instead of a LB we are using a DNS entry for prettyname.com and both the webcontexturl and privateportalurl use this (automatically setup by dsc as we set the externalloadbalancer tag to prettname.com for both portal and server blocks. When we turn on IWA via IIS the settings the same as above happens, cannot get to settings and when we try to connect to AGS manager we are prompted for siteadmin uname/pw. We have a dev setup in the same way but was done manually and the privalportalurl is not set. Switching on IWA works perfectly. I also noticed that federation uses 7443 on this setup whereas the DSC has the prettyname.com. Any ideas on what we can check/do? Thanks Lachlan W

‎06-03-2020

Greate script Jeff, you just saved me so so much pain. Slotted it in and bang, rolled it. thanks mate!

‎09-25-2016

Hi Matt Did you obtain a solution to this? We are wanting to do the same. Cheers Lachlan

‎04-07-2016

Hi Everyone I have not placed a ticket with ESRI Australia yet.......just seeing if anyone has had the same problem. We have ArcGIS Portal for ArcGIS 10.3.1 using AD authentication and federated with ArcGIS Server. Both on same server (Windows 2012) and fully patched. Portal/AGS, each with their own web adapter. I am getting issues with tokens when displaying or querying a featureserver. Essentially I cannot see a features when using the map viewer in Portal or performing a query from the rest endpoint of AGS for the FeatureServer. The message from AGS rest once pressing Query (Get) is: Unable to complete operation. Unable to perform query operation. We can query the same MapServer without problem. Has anyone else had this problem?? It seemed to start once the patching had been completed. The messages from AGS log is: Token is not a valid Admin token. Trying portal token next. Token = BaM6fpKag78K2HqpfjTit3cvUcuhmAVWyZ_dh08h6fQ7UgVmep0P8K7AO8XyQhCRajbIK8rgUA5p5ZwWvaZcbH7n_tqs1wuUjyemMVMmA6giOq2lY7qmY1Wr2dLVYQyfXTh275uBRCUcSmBYsFNueDHQwMoKv42ucHABg_pjH5uNARiK01-3-C4PNEMgv-LJtDNZfqFVrgEB4U9A1vngw9ZLTaZWk5D0Sa4uXpMwgY8h-KKlfRS_NPXOThe17UUu, referrer = https://XXXXXXX/arcgisserver/manager/log.html#lgf=type%2Ctime%2Cmessage%2Csource&lqlf=DEBUG&lqa=last%20hour&lqs=ALL&lqm=ALLCould not decrypt token. Token may not be valid. Thanks Lachlan

Online Status	Offline
Date Last Visited	‎01-25-2024 02:08 AM

My Ideas

Latest Contributions by LachlanWainwright

Re: Unauthorized - FME Web Connection Failure

Re: Arcgis server patch keeps installing

Arcgis server patch keeps installing

Re: ArcGIS Enterprise HA Portal configured to use IWA having issues loading Organization/Settings

Re: ArcGIS Enterprise HA Portal configured to use IWA having issues loading Organization/Settings

Re: Updating connection info via python from SDE to File geodb - with a feature dataset

Re: Linking to a local folder in Portal for ArcGIS

Portal token issues with FeatureServer

Re: Arcgis server patch keeps installing

Re: ArcGIS Enterprise HA Portal configured to use ...

Portal token issues with FeatureServer