Latest Contributions by ToddUlery

‎05-13-2019

Just my 2 cents after my troubles: VIA ESRI: I did want to provide you with the workflow to get around the Altitude Too Low error we saw in Pro, however, we will still run into the above mentioned defect due to the camera type. To get past the Altitude Issue: Open an ArcGIS Pro Project Imagery > Workspace > New Workspace Define Your Name, Description and Type Next Add Images > Click Set Elevation Source in Lower Right Corner of Ortho Mapping Pane Elevation Source Dropdown Select Constant Elevation Set your elevation value (roughly between 50 and 60 m) This will adjust the images accordingly I apologize for the inconvenience with this issue. I did want to include the orthomapping workflow for ArcMap for reference in case that is something you would want to look at, if not though I understand. That resource can be found here: https://desktop.arcgis.com/en/arcmap/latest/manage-data/raster-and-images/ortho-mapping-overview.htm A bug was logged and fixed in 2.4 when it arrives.

‎10-26-2018

This is a dated response, but did you ever get a resolution to the Altitude issue when making a workspace with Drone imagery? I have the same model and errors as you do.

‎10-11-2018

Ortho Mapping - Drone Image Example: Image DJI_0069.JPG Latitude 38° 38' 53.01" N Longitude 85° 46' 17.19" W Altitude 173.86 DateTaken 9/26/2018 1:09:23 PM Camera FC6310S There appears to be an issue with the Altitude: 2018-10-11T19:12:28.196: Error: 80004005: Creation of frame camera model failed. 2018-10-11T19:12:28.212: Error: 80004005: The altitude is too low at: 3.115658 meter. 2018-10-11T19:12:28.223: Error: 8004206c: Failures reported while processing specified command item. [303] 2018-10-11T19:12:28.226: Error: 80042019: Chained Error ID: 0X80042019 2018-10-11T19:12:28.230: Error: 80042019: Could not build mosaic dataset item. Another error: 018-10-11T19:12:28.132: Error: 8004206c: Failures reported while processing specified command item. [301] 2018-10-11T19:12:28.134: Error: 80042019: Chained Error ID: 0X80042019 2018-10-11T19:12:28.147: Error: 80042019: Could not build mosaic dataset item. Trying to figure out what may be bad. There are 319 files, but not all produce errors. Locations are all produced correctly. But a mosaic is never built.

‎08-14-2018

Thanks, this clears it up for me. Thanks for the link also

‎08-14-2018

Thanks for the response, but I am just speaking about the migration of MXD to PRO - the GDB sourced in MXD and how this might be apart of the import workflow in PRO. Importing MXD to Pro does not migrate GDB, so I am trying to understand ESRI's workflow with this part of the migration process. If they are just expecting us to use TOOLS to move the data and then manually resource the layers in the imported map.

‎08-14-2018

When you import Map from mxd - to Pro Project: The sources are still connected to the previous. Is there a workflow for migrating the GDB's that are sources from the original to the Pro Project. I understand the copy tools, but wondering if ESRI had a different workflow for this, with some other methods to ease the migration process? #arcgis pro 2.x‌

‎07-16-2018

Working with REVIT - the Draw time can be very time consuming, is this expected in all cases of Revit model size/data? Are the additional tips for Optimizing Pro 2.2 environment. I have already gone through the ONLINE Docs. on display changes. The Time is still very long, and how is caching working, bc It seems very negligible after a full load. Nothing seems to improve the time. I realize the size of my models may have a lot, it is an entire building model, but just want to make sure I get all things that can be done to optimize the Environment. arcgispro #revit‌

‎11-22-2017

I am very interested in this progression. I am eager to see what might be available with regards to Beta's or Test projects.

‎06-27-2017

Hi Robert Scheitlin, GISP, I have also been looking into a buffer on features. I am trying to use a selection as the starting point for Geometry, and based on user input for distance and color scheme/Line type will generate a buffer as an operational layer. I have been looking into you Identify and your eSearch widgets. And trying to get the parts of what I want from it, but of course, it is becoming quite a barbaric task that I might be losing at. So given the specs: - user selected color and line type for buffer - feature selection on the map (point/polygon type graphic) - text-based distance input Do you have any advice to get this going? I have spent a few days so far on my mentioned method and feel lost in the progress. The eSearch accomplished almost all of what I need; just missing the color scheme for buffer graphic. Thanks for any help you might be able to offer.

‎06-26-2017

Hi rscheitlin, I have also been looking into a buffer on features. I am trying to use a selection as the starting point for Geometry, and based on user input for distance and color scheme/Line type will generate a buffer as an operational layer. I have been looking into you Identify and your eSearch widgets. And trying to get the parts of what I want from it, but of course, it is becoming quite a barbaric task that I might be losing at. So given the specs: - user selected color and line type for buffer - feature selection on the map (point/polygon type graphic) - text-based distance input Do you have any advice to get this going? I have spent a few days so far on my mentioned method and feel lost in the progress.

‎06-14-2017

I have it figured out now, Thanks, Robert.

‎06-14-2017

I see this example. I have it setup very similar but instead of image would rather use text. But even with just trying to use an image it still doesnt show up. All link options are set in the json.

‎06-14-2017

Hey, Robert, I have been using the identity widget for a while now, but never figured out how to get links to work. I have just added my own method to accomplish this. But would like to revisit the link concept in this widget, and see what I might be missing.

‎05-08-2017

Thanks, Robert Schmidley‌ and rastrauch‌ ---- It is a bit more complicated than I thought for the timeframe I have and would better serve to just wait on it. On another objective; would you suggest a best practice when altering the WAB structure (regarding CSS on Theme based Elements) to place these style updates in a separate CSS file and just @import or load this in separate. Or just tack them on to already existing CSS files where the original exists. ???

‎04-25-2017

Yeah that was the thought, but then i started getting in the weeds, and then they started to grow higher. Just not a JSON master. But i am sure i am just over thinking it.

Online Status	Offline
Date Last Visited	3 weeks ago

My Ideas

Latest Contributions by ToddUlery

Re: Ortho Mapping - errors when creating workspace

Re: Ortho Mapping - errors when creating workspace

Ortho Mapping - Error Troubleshooting a solution

Re: Migration from ArcMap to ArcGIS Pro - Databases

Re: Migration from ArcMap to ArcGIS Pro - Databases

Migration from ArcMap to ArcGIS Pro - Databases

ArcGIS Pro 2.2 - Optimization for REVIT MODELS

Re: Esri and Autodesk are now partnering to combine the power of BIM and GIS

Re: Enhanced Search Widget Version 2.13 - 09/25/19

Re: Web AppBuilder buffer widget

Re: Identify Widget Version 2.15 - 6/16/2020

Re: Identify Widget Version 2.15 - 6/16/2020

Re: Identify Widget Version 2.15 - 6/16/2020

Re: Updating config.json for Application - with Javascript

Re: Updating config.json for Application - with Javascript

Ortho Mapping - Error Troubleshooting a solution

Re: Ortho Mapping - errors when creating workspace

Re: Open, Refresh Connections, Save, and Close Exc...

Re: Python: retrieving from list & adding autoincr...