Latest Contributions by Gerald_ZBray

‎11-05-2020

Mine was cleared by a reboot of the Windows server.

‎11-05-2020

I am getting the same log message. It seems to have appeared after adding a Field Mapper. Did you ever resolve your issue? Would you be willing to share your solution?

‎08-31-2020

Jacob, You can email at [email protected] to discuss this further. This setup has been running without any real issues for some time now. I will have to try and dig up the details. Zach Bray

‎09-05-2019

We were able to get this working. However, it did require us to do some development. This did prove to be fairly simple. We are a member of Multispeak as a cooperative, so we had access to the programming templates. A developer from our state wide organization NCEMC was able to take that and create a simple client application that we could use to call a stored procedure, I wrote, in our GeoDatabase to get the list of truck and send it to the server side of the interface on our Milsoft server. We fire the client side application from a SQL Agent job on our database server every 15 seconds. We had to use the SQL Agent as I could not figure out how to get Microsoft Task Scheduler to fire that often. If you would like to discuss this further off line please reply back and we can figure out how to reach each other. Please wait until next week as we are looking at Hurricane Dorian at the moment. Thanks, Zach Bray

‎05-09-2018

We are a small Electric Distribution cooperative. We have the ESRI Small Utility ELA. We have an enterprise geodatabase running on SQL server. We are running the ESRI GeoEvent Processor to create a simple AVL by processing GPS data from cellular routers in our trucks. What we would like to be able to do is via a MultiSpeak interface pass the Vehicle Location information to different systems. My question is, Is it possible to implement a MultiSpeak interface with ESRI products without having to do a lot of development? Any thoughts welcome. Thanks in advance.

‎06-16-2016

All, I am wanting to reconfigure the Water Utility Isolation Trace Widget to work on my Electric Distribution utility network. Here is a link to the example Utility Isolation Trace | ArcGIS for Water . I have downloaded the example but the geoprocessing model was beyond my current level of knowledge. I am hoping to be able to configure something that would allow my users to select a starting point, possibly add barriers and then request a trace. The results would then be offered up for the user to review, print or possibly export. I realize that sounds like a lot but it is a normal workflow for us. I have seen all the different parts as examples, just not all put together. Can anyone offer me assistance?

‎03-15-2016

I have attached a small sample of my data that you could use to test with. My workflow is to create a version to edit against, make my edits, save, reconcile and post, then delete the working version. I do the same workflow multiple times. I believe that after 3 or 4 edits that create new features, then this problem appears. It does seem that if you just edit the related tables this problem does not appear. If this sample does not produce the problem would it be possible to do a screen share to see what is happening? thanks Zach

‎03-15-2016

Yes I do have domains set on the fields in question. I have domains set in both my PoleAssembly and AssmblyUnit tables on my AssemblyCode, Category and SubCategory fields. I am trying to do a look up into my AssemblyUnit table from my PoleAssembly table to populate the Category and SubCategory fields. The AssemblyCode in both tables is configured the same way with a domain set on it to help get the correct AssemblyCode. When I change my AssemblyCode in my PoleAssembly table I am trying to use the Copy_Linked_Record method to look up the Assembly code in my AssemblyUnit table to populate my Category and SubCategory fields in my PoleAssembly Table. I am including screen shots of the fields properties on both my AssemblyUnit and my PoleAssembly tables as well as a screen shot of the relationship class configuration. Does that get you the "data row" you requested or are you looking for something else?

‎03-14-2016

I having an intermittent problem with the Copy_Linked_Record method of the Attribute Assistant. My configuration will work fine for a while but then start to fail with : ERROR: COPY_LINKED_RECORD Value does not fall within the expected range. Then just a mysteriously it will begin to work again. I have attached a copy of my AALogFile and a copy of my DynamicValue table for the part in question. I am trying to copy values from one table to the another table. they are related on the proper fields. If anyone can suggest something that might correct this issue it would be appreciated. Zach Bray

‎02-23-2016

Michael, I had added the |P prompt option to all of my Intersecting Feature rules and that caused the rule to not prompt and not fill in any of my values. I do not know if this makes a difference but I am using this on a Windows 10 machine. This behavior started BEFORE I upgraded to Windows 10. Can you provide me a link to the most recent copy of the Attribute Assistant addin? I would like to try re-installing everything to see if that helps. Thanks zach

‎02-21-2016

I am still have issues with the Intersecting_Features. I use a similar logic across several FeatureClasses. In this example it is my Primary UG Line Section FeatureClass that is giving me problems. In the attached AALogFile you can see where one attempt failed and then the next worked, both from the same edit session. I marked them with a &&-Failed and &&-Worked. I have also attached my DynamicValue table as a File GeoDatabase is the zip file AEMCDynamicValue.zip for review. I have tried cross check my DynamicValue table field names and data types but am unable to find that listed anywhere. Does anyone know where I could find a support tech that could look at my setup and watch an edit session to help me diagnose the problem? As I stated earlier, this worked for me in the 10.0 version. I do not know what has changed that might be giving me problems.

‎02-10-2016

Michael, My field name is RUNWEIGHT. I will change it to RUN_WEIGHT and see how that works. That would explain my odd results Thanks Zach

‎02-02-2016

Michael, I made your suggested change to include the "|P" onto my Intersecting_Feature method. I noticed that my RunWeight was not honored. I thought AA would step down from highest to lowest. What I saw was no special order. I have attached another AALogFile and an export from my DynamicValue table. Both are specific to my SecondaryUGLineSection FeatureClass. May be this will shed some light. Thanks Zach Bray

‎02-02-2016

Michael, I will give this a try. What I am trying to accomplish here is get an inheritance try rule in place to pass down certain pieces of information. Often times I am inheriting from the same FeatureCLass just not the same record or feature. I did have this working well for me in ArcMap 10.0. Is there another way to get the same result? the LastValue does not work because I use the same field names across FeatureClasses and the values I want are dependant on what other FeatureClasses the new feature intersects. Thanks Zach

‎02-01-2016

Michael, I had an example of a failed/stopped working, see the attached file. I marked my examples with "&&&" and then a comment. It starts about half way down with a "Secondary UG Line Section - ON_CREATE". Any help will be appreciated this problem is becoming a headache. Thank You Zach Bray, Albemarle EMC

Online Status	Offline
Date Last Visited	‎11-17-2020 08:28 AM

My Ideas

Latest Contributions by Gerald_ZBray

Re: GeoEvent no track id troubleshooting

Re: GeoEvent no track id troubleshooting

Re: How to implement a MultiSpeak interface?

Re: How to implement a MultiSpeak interface?

How to implement a MultiSpeak interface?

How to reconfigure Water Isolation Trace Web AppBuilder Widget

Re: Attribute Assistant Copy Linked Record intermittent

Re: Attribute Assistant Copy Linked Record intermittent

Attribute Assistant Copy Linked Record intermittent

Re: Attribute Assistant stops working after multiple edit sessions, multiple versions

Re: Attribute Assistant stops working after multiple edit sessions, multiple versions

Re: Attribute Assistant stops working after multiple edit sessions, multiple versions

Re: Attribute Assistant stops working after multiple edit sessions, multiple versions

Re: Attribute Assistant stops working after multiple edit sessions, multiple versions

Re: Attribute Assistant stops working after multiple edit sessions, multiple versions