-
Catalog Layers: Add tool to recalculate extents.
Based on the discussion here: Catalog Layers: Updating Footprints? - Esri Community I would like a tool to recalculate the extent of catalog layer records. Per the documentation, that is not possible. That makes things awkward. For example, the Acme Corporation has a file showing all of their hazmat sites. When they add…
-
Recursive relationships
Hello, I am trying to create a spatial database for a cemetery and I would like to set up a relationship between records within the same table so that people searching for the grave of a person are also able to see records of the graves of the person's relatives. I understand that recursive relationships are not supported.…
-
Add Tab Folders for Maps and Layouts
It would be helpful to have the option to create collapsible folders in the tab bar to organize open maps and layouts. For larger projects with multiple maps and layouts, the tabs can quickly become crowded and difficult to navigate. This would be especially useful for larger projects that involve multiple maps and layouts…
-
Aerial Merge is not working
Hello, I am trying to merge multiple .tif aerials into a single source using the Mosaic to New Raster tool. However, I keep getting a blank output. Any ideas or suggestions to have them fuse together into one single aerial? Thanks George
-
Run flood simulation in web UI via Scene Viewer / widget
I understand that ArcGIS Pro supports exporting flood simulation results as cloud raster format (multidimensional rasters), which can be displayed using a time slider on the scene viewer. However, this is not the same as viewing the water flow using a 10-60 FPS playback. It is a step-based animation that is not the same.…
-
Free ArcGIS Pro toolbox for basin analysis — no Spatial Analyst licence, and it exports to Arc Hydro
I have published a free, MIT-licensed Python toolbox for ArcGIS Pro. One coordinate in, a full river-basin analysis out. Fourteen tools — one runs everything, the other thirteen do a single piece each, so they work in ModelBuilder. It delineates the basin, downloads elevation, land cover, soil, rainfall, surface water and…
-
Improve the messaging returned by the recalculate feature class extent tool
This idea is a minor change to nothing more than the messaging generated by the tool as it runs. It would be useful and informative that when the tool runs it states in the messaging what was the initial extent and what is the newly calculated extent. This of cause could be the same set of coordinates if there was no…
-
Using ArcGIS AllSource for Geospatial Intelligence Analysis - Class Resources
Mission support that uses the power of location. This course teaches geospatial concepts and recommended workflows that support the production of timely, accurate, and actionable intelligence. Using relevant scenarios and operational problems, you will learn how to manage, analyze, and visualize geospatial data, then share…
-
Hillshade Raster Function Output Results Look Strange
Hi all! I'm working with a larger DEM raster, and attempting to create a hillshade layer using the system raster functions Hillshade. It runs successfully, and from a zoomed out view, the hillshade seems to look correct. However, upon zooming in, the layer begins to look more like a contour map: How I had the tool set up…
-
Exact Match fails for "MUSCAT" (Oman) at Provinces level — works with fuzzy match, fails 1-of-6 with Exact Match on
Hello I'm using the native Power BI map visual with Represent location as: Boundaries, Region = Oman, Geographic areas = Provinces, bound to a text column containing standardized wilayat names (AS SEEB, BAWSHAR, MUSCAT, MUTTRAH, QURAYYAT, AL AMRAT). With Exact match OFF: all 6 features match and render correctly ("Features…
-
Generate Travel Areas caps Trucking Time at 5 hours, less than half the federal 11-hour driving limit
Esri ships a Trucking Time travel mode built specifically for commercial trucks. Yet Generate Travel Areas rejects any cutoff over 300 minutes (5 hours). So the truck-specific tool cannot model a legal truck day. Under FMCSA Hours of Service, a property-carrying CMV driver may drive up to 11 hours after 10 consecutive…
-
Spatial Join: is many-to-one possible?
I have a point layer and a streets layer that I want to do a spatial join on. Because the points can fall on street intersections, I want to join one-to-many such that I get a record for each street it touches. This works, but the output is a point layer, with one point for each street it touches. What I really want is…
-
Export Feature Bins?
I would like to be able to export feature bins created by binning to a separate file. Has anyone figured out a way to do this? I understand that the bins are dynamic and change depending on the size you set and the scale, etc., but it would be really helpful to export the bins as polygons with the feature count within them.
-
Enable the FeatureLayer.calculate() method in the ArcGIS API for Python to accept Arcade expressions for calculating attribute values.
Current limitation The FeatureLayer.calculate() method currently supports calculating field values using SQL expressions or scalar values. However, there is no direct way to apply an Arcade expression through this method. This creates a gap for workflows that rely on Arcade for attribute calculation logic, particularly…
-
Open-source Forestry Toolkit for ArcGIS Pro – fieldwork, drone mapping, fire hotspots, and forest analysis
Hi everyone, I’d like to share a small open-source project I’ve been working on called Forestry Toolkit, an ArcGIS Pro add-in built around practical forestry and fieldwork workflows. I originally started it to simplify some of the repetitive GIS tasks I encounter in forestry work, and it gradually grew into a collection of…
-
Define a minimum and maximum width of a route corridor after using the Least Cost Corridor tool
Hi all, Is there a way to constrain a route corridor to a set width? I've used the Least Cost Corridor tool and have symbolised it to show the lowest cost route. I'm planning to convert it to a polygon to output my final corridor, but I need my final corridor to be between 50 m and 1000 m, and it currently varies from 10m…
-
Raster To Polygon Parallel Processing
Raster To Polygon can really really benefit from Parallel Processing when the raster has a lot of pixels which means a lot of polygons that will bog down a single CPU core no matter how fast your CPU is. PS: Liking the new interface, reminds me of a little bit of Reddit lol. Anyways the interface the fast which is good.…
-
Join the USA Geodemographics Embeddings Early Adopter Community
Geodemographic embeddings are a new type of data that capture the geographic signature of locations. They can be used by analysts and data scientists for clustering, finding similar locations, enhancing predictions, and for intelligently filling in missing values. To make demographic insights more accessible for analysis,…
-
add support for WMTS for Deep Learning
Add support for WMTS as an input for Deep Learning. Most imagery companies provide imagery via WMTS. Currently, a user has to download the imagery. Which is also difficult in ArcGIS, as related to my other Idea / ENH: Add support to clip and download from WMTS service in ArcGIS Pro - Esri Community Even after users…
-
Geotech contractor data for 3d interpolation with Geostatistical Analyst
I'm an experienced ArcGIS Pro user, but completely new to geotech and the 'Geostatistical Analyst' toolbox (for which we have not yet purchased a license). I would like to use the 3d interpolation tools in the Geostatistical Analyst toolbox to generate 3d models from geotechnical works performed by contractors. The…
-
Create hosted imagery consistently fails
I am posting here, as it is a Pro issue. (ArcGIS Pro 3.7.1) I have created a mosaic dataset in Pro using the Weighted Raster Overlay toolbox (but also have tried the same using Python or Spatial Analyst). I want to use the Create Hosted Imagery wizard to upload the WRO to ArcGIS Online and use in the Suitability Modeler…
-
Suitability Modeler Export
I am using Suitability Modeler in ArcGIS Pro 3.7.1. I have created some composite rasters for various hazard and vulnerability variables, and then overlaid them with a vector layer, and summarised within by Sum Normalised by Area (mean). How do I export this as a vector layer, with the information from the model, other…
-
DA Search Cursor Ignoring sql_clause
A search curser was ignoring the ORDER BY command I had plugged in and I thought I'd enter a nonsense sql_clause just to see what error it threw. The uncommented one below is the cursor command with the nonsense sql_clause It ... runs fine. It doesn't do the ordering I want it to do, of course, but it runs. No error. When…
-
Transform Route Events tool fails with ERROR 999999 while transforming point events between route feature classes
Hi, I'm encountering an issue with the Transform Route Events (Linear Referencing Tools) tool in ArcGIS Pro. Environment * ArcGIS Pro Version: 3.6 Problem The Transform Route Events tool fails immediately with the following error: ERROR 999999: Something unexpected caused the tool to fail. Contact Esri Technical Support to…
-
Raster Cut & Fill Documentation Error?
I believe an adjustment (to show cut as negative and fill as positive) is made in the Attribute table.
