-
Como exibir linhas de energia elevadas
Use um MDE como superfície de elevação — como posso mostrar linhas de energia elevadas acima da superfície? A camada de linhas de energia tem um atributo de altura de 20 m. Embora eu consiga extrudar a linha — isto é, definir altura mínima, altura máxima e altura da base —, tudo mostra um perfil sombreado. Só quero mostrar…
-
Run flood simulation in web UI via Scene Viewer / widget
I understand that ArcGIS Pro supports exporting flood simulation results as cloud raster format (multidimensional rasters), which can be displayed using a time slider on the scene viewer. However, this is not the same as viewing the water flow using a 10-60 FPS playback. It is a step-based animation that is not the same.…
-
Configurar Pop-ups para Camadas de Cena de Edifícios no Scene Viewer
O ArcGIS Scene Viewer deve suportar configuração de pop-up para Camadas de Cena de Edifícios. Atualmente, pop-ups podem ser configurados para Camadas de Cena de Objetos 3D diretamente no Scene Viewer, enquanto a mesma opção não está disponível para Camadas de Cena de Edifícios. Especialmente para Camadas de Cena de…
-
Suporte à Transparência para Malhas Integradas
O ArcGIS Scene Viewer e o ArcGIS Pro devem suportar transparência para malhas integradas. Atualmente, a transparência não é suportada para malhas integradas, o que limita seu uso em cenas onde a malha precisa ser combinada com outros conteúdos 3D. A transparência ajustável possibilitaria visualizar e comparar dados…
-
Edição 3D Avançada para Malhas Integradas
O ArcGIS Scene Viewer ou outro aplicativo adequado no ArcGIS Online deve oferecer capacidades avançadas de edição 3D para malhas integradas. Atualmente, as modificações em malhas são principalmente limitadas a Operações de Recorte, Máscara e Substituição. Essas opções não são suficientes para casos onde partes de uma malha…
-
Dependências Configuráveis de Visibilidade de Camadas no Scene Viewer
O ArcGIS Map Viewer e o Scene Viewer devem permitir que os usuários definam dependências de visibilidade entre camadas específicas. Isso tornaria possível configurar relações entre quaisquer camadas, independentemente da posição delas na hierarquia de camadas. Por exemplo, mostrar a Camada A poderia automaticamente fazer…
-
Camadas de Grupo Aninhadas e Modos de Visibilidade no Scene Viewer
O ArcGIS Scene Viewer deve suportar camadas de grupo aninhadas, semelhante à organização de camadas mais flexível disponível no Map Viewer. Isso permitiria que Web Scenes mais complexas fossem estruturadas usando múltiplos níveis hierárquicos em vez de serem limitadas a um único nível de grupo. Além disso, cada nível de…
-
Publicando uma Web Scene no AGOL, a fonte é uma classe de feição multipatch com uma tabela relacionada, a tabela relacionada não é publicada no serviço de feição hospedado
Olá, Sou bastante novo em publicar dados de cena 3D, tenho um modelo BIM de uma ponte, convertido para camadas de feição Multipatch, uma tabela relacionada de avaliação de condição foi adicionada à estrutura de dados e está funcionando bem no FGB land, agora tentando publicar no AGOL. Criei uma web scene no Pro com a…
-
Show dynamic length label while sketching the profile line in Scene Viewer Elevation Profile
When sketching a line with the Elevation Profile tool in Scene Viewer, there is no distance feedback while drawing — the total distance is only visible on the chart after finishing. I would like a dynamic label at the cursor showing segment and total length while sketching, like the Measurement tool already has. Today,…
-
Importing XYZ map tiles to Scene Viewer
Hello, I'm currently building ExpBuilder dev edition app, which uses Scene Viewer for displaying old georeferenced maps on a globe. Main source of maps is the David Rumsey collection, which also provides IIIF manifest link. This way I can save both time and space, and instead of downloading maps, georeferencing them in Pro…
-
Labeling features in ArcScene
I used some DEMs I had to create an ArcScene 3D model of my parish. I also created contours from the DEMs and am trying to see if I could label the contours in the 3D model in ArcScene. I can see it's not straight forward using the Labeling feature as you can do in ArcGIS Pro. Can anybody point me in a direction to do this?
-
Oriented imagery error in 3D scene, but working in 2D map
I have a point oriented imagery dataset in ArcGIS Online. When I view the points in 2D, the oriented imagery viewer works perfectly. However, when adding the points into a 3D scene, the viewer gives this error message: Error occurred while loading the image. Cannot destructure property 'points' of '(intermediate value)' as…
-
Ability to adjust basemap visibility range in Scene Viewer
In map viewer, you can add multiple basemap and adjust them to appear dependent on map scale. I don't see this option available in scene viewer. Could we add this capability if it's not already? Thank you!
-
Google Photorealistic 3D Basemaps for ArcGIS Online and Trees
The Google Photorealistic 3D Basemaps are a great addition to the ArcGIS Online. I understand it is in Beta. I tried it in ArcGIS Pro and ArcGIS online has a similar negative outcome when adding vector lines as shown here. Attached are screenshots showing the vector line bouncing up and down with the trees with On the…
-
Re: Google Photorealistic 3D Basemaps for ArcGIS Online Personal Use Subscriptions?
Hi SoraKupiter , On the following page :https://www.esri.com/arcgis-blog/products/arcgis-online/3d-gis/experience-the-google-photorealistic-3d-basemap-in-arcgis-online it is stated that: sessions are not provided to students, Esri Nonprofits, or Esri Business Partner organizations. There will be options to buy…
-
Labelling in WebScene not available
Does anyone know the rules as to when the labelling option appears for a hosted feature service in ArcGIS OnLine? I have two feature services as line geometry, almost exactly the same except for some attributes and one allows me to switch on labels in the WebScene and the other has no labelling options at all. Both…
-
Reference Registered 3D Object. How to re-cache?
I created a 3D object scene layer. * Imported it into an Enterprise Geodatabase (SQL Server) * Shared it to ArcGIS Enterprise using Reference Registered Data option. Everything seems to be working ok. I can update the data in the Feature Layer, but how do I update the cache in the Scene Layer? It doesn't have the option to…
-
Scene 3D Slice tool showing height
Hello, When using the slice tool it is nice to see when certain features appear. It it possible to show at which height the horizontal/aligned slicer is based on the elevation layer/ coordinate system? This can help the user in an easy way to determine at which height assets are. It could be only one height for a…
-
Regarding Projection for Web Scene
Hello everyone, I was trying to import imagery layer to my scene but i could not do it due to different projected coordinate system: NZGD 2000 New Zealand Transverse Mercator but my base map is in web mercator. Also, I tried to add imagery layer by remobing my basemap. It didnot work. Can anyone help me to sort this out?…
-
How to add multiple elevation surfaces to Scene Viewer?
This is one of the many limitations of using Scene Viewer for subsurface geology where we often have many subsurface elevation surfaces for different formations. Since Scene Viewer essentially only allows a single Ground elevation layer, it does not allow other subsurface elevation surfaces. There are some work arounds but…
-
Scene Viewer Mesh Modifications Not Saved
Hello all, I have a simple thing. In ArcGIS Online when I: * create a new 3D scene * add a mesh (Scene Layer) * apply a custom polygonal modification to the mesh * save the scene * refresh the page * the mesh modification is no longer there, it disappears Bug? 🐞 Thank you! v.
-
Custom 3D basemap for my scenes
Hi, easy question. Is it possible to create a custom 3D basemap for my scenes in ArcGIS Online, thanks!
-
Scene Viewer cannot include features in spatial filter for a Scene Layer (it excludes them instead)
Hello, I am here to report a possible bug in ArcGIS Online Scene Viewer (as of today's version). To reproduce this bug, do the following: - Open an empty Scene Viewer - Add a Scene Layer - Click on the three dots in the list next to this layer --> Layer properties - Configure spatial filters - Select INCLUDE - Select…
-
Option for Eye-Dome Lighting in scene view online
I would like an option for Eye-Dome Lighting to improve visualization and depth perception in a point cloud. I know Modulate using intensity is an option, but that does not accomplish the same as Eye-Dome Lighting. Without Eye-Dome Lighting: With Eye-Dome Lighting:
-
Display edge dimension labels for 3D objects (buildings) in a 3D scene
Functionality to switch on and off edge dimension labels for selected 3D object models such as buildings and bridges in a 3d scene. See attached image. This will allow users to get a quick understanding of the size of a building for planning, design and regulartory purposes without needing to manually measure each edge one…
