nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

Drone2Map-monsters worden niet verwerkt — nog niet beantwoord

SUSANMYERS

<\/HEAD>

Hallo—Ik heb de proefversie van Drone2Map gedownload, en terwijl ik een paar van de monsters uitprobeer, zodra ik op Start klik om een monster te verwerken, volgens de gegeven stappen, lijkt de onderste statusbalk een paar seconden te verwerken, en keert dan terug naar "Klaar Voltooid.", met 100% in de statusbalk, maar er worden geen 2D-producten en geen 3D-producten aan het project toegevoegd zoals vermeld in de monsterinstructies. Wat mis ik, of wordt er nog op de achtergrond verwerkt?<\/P>

Dank u.<\/P><\/BODY><\/HTML>

Vind meer berichten getagd met

Accepted answers

All comments

SebastienBLANC1

Hi everyone,

I made an ortho-image, but when I import the GPS coordinates via the GCP manager to link them, a 1m gap appears between the red crosses and the GCP.
I would like ton know why is there a gap and how to fix it ?

Thank you.

AndrewRMurray

Hey Claire, so I did finally get it working. I think it was the Microsoft Visual install. Once I installed that, I reinstalled drone2map, and rebooted everything it started working fine.

SUSANMYERS

Hi Claire Pook,

Anthony Mason identified that something in our server security settings was quarantining a Drone2Map executable and preventing the software from working properly. I am not sure what our network guys changed in our server's security settings, but they identified it quickly when I let them know and once that was done, Drone2Map was happy and began to work properly.

ClairePook

Hi Andrew,

I've just installed Drone2Map 1.0.1.498 and experiencing the same. I upload my images, and they appear in the Image Properties dialog, but not on my main map screen. The only thing in my Contents Pane is the base map layers.

Have you had any luck resolving this?

Thanks,

Claire

AndrewRMurray

I'm having similar issues but initially when I load the 3D project, the image points don't show up, and there is nothing in my contents pane with the exception of the basemap layers. If I click image properties, all of my sample images appear (I'm using the ESRI tutorial data) but nothing in the actual application. If I process, I get results in my folders but no visualization in D2M. I installed Visual C++ 2008 redistributable x64 and reinstalled D2M with no affect. I can even open a 3d pdf and seean interactive 3d model through the 3D builder app that I guess comes with windows 10, but nothing in arcgis. I tried pulling the .spk file into pro but nothing worked there either. Any suggestions?

DonSolleder1

Hi Sara, that is exactly when mine will crash is when I try to pan or zoom. It seems to help if you turn off the basemap layer. I have tried Drone2Map on both my laptop and desktop machines and the crashing only happens on my laptop. However it is a new laptop with plenty of processor and memory so I don’t know why it would keep crashing like that. Have you installed the latest version of D2M? (version 1.01). Do you have a desktop workstation that you can try it on?

SaraAmundson

Thank you for this tip. I uninstalled and re-installed the Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.6161 and ran a repair on Drone2Map and I was also able to acquire the finished products. The program crashed as soon as they were loaded, but at least they are now there in the folders.

As for the crashing problems, I also have mine crash a lot when I pan and zoom. I marked it up to my laptop being hardly able to handle the program. My processor screams at me every time I use Drone2Map or ArcGIS for Desktop. I knew it would happen and I've just dealt with it because I do not have the option of using a better computer at this point in time. However, maybe some of the crashes are due to bugs in the newness of Drone2Map. I wouldn't be surprised if it were fixed in the near future for those who's computers are actually built to handle these programs.

DonSolleder1

Update on my situation: I uninstalled and then re-installed the Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.6161. Upgraded Drone2Map to version 1.01. Did a windows update and included all of he .NET framework stuff. Now I do NOT get the completed message problem anymore. Instead i get a message that says "preparing data for visualization" and 95% appears on the right side for a few minutes and then viola! it is working!!!

However now I have a new problem. Each time I change the view by panning or changing basemap then Drone2 Map crashes!

Anyone have any ideas what is happening there?

SaraAmundson

What is the next step after making sure this is installed? I have the same problem as above, and if I then try and process another set of pictures, or the same set, the processing goes right to completed. I have the trial and I need to know if this is something that could be proposed to the company I work for, but I need to be able to see results and be able to manipulate results. When the processing goes right to completed, I have to run a repair and then I can process another set of pictures before the same things happen once again.

DonSolleder1

I also experienced the same problem using new imagery taken from a DJI Phantom 4. It gets all the way to the end and says it is complete 100%. It does create a gdb with photo locations and flight path. The 2D folder is populated with a DSM that I can view in Arccatalog but it is NOT added to the Drone2Map project. No full mosaic orthophoto is created or added to project. If I attempt to view any products in windows they appear as a large blank (white) area surrounded by a black border. Also I do have the Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.6161 installed. Any ideas??

SUSANMYERS

Hi Tony,

Yes, Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.6161 is installed. See screen shot below.

Thank you very much,

Susan

image001.jpg

AnthonyMason

We are actively working on this issue. Could you please check to see if you have the following installed on your machine?

Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.6161

If you do not have this installed, please install and try to process the sample data again.

Thanks

Tony

SUSANMYERS

Hi Gerald,

Thanks for your comment. When you say, the files are out there, are you actually able to get the image points, flight lines, ortho, etc? When I run initialization and orthomosaic and DSM processes according to the tutorial using the provided Rapid tutorial data, the project folders get set up, but 2D and 3D folders are empty, and the GDB has empty datasets for flight lines and image points. No data is created when I process it.

Thank you.

SUSANMYERS

Hi Jacob, does Drone2Map actually produce datasets in your project folder for flight lines, image points, orthomosaic, etc? Or does the program just tell you the processing is complete? My says it completes 100%, but this is after just seconds, and in truth, the datasets are either not populated or not produced.

GeraldLester

I am having the same issue also. I have tried all of the ESRI provided data and some imagery that we acquired. It processes and says its completed but none of the imagery shows. The files are out there, I can bring them into ArcGIS and view them but they don't show in the Drone2map application.

DanPatterson_Retired

Linked to this thread as well... Drone2map Samples Not Processing

JacobHechter

Hi. I have had the same problem using the samples provided by ESRI. Everything processes but nothing is added to the map.

Doe mee aan het gesprek

Aangemelde leden kunnen berichten plaatsen, updates volgen en meer. Nieuw hier? Registreer een gratis account.

Snelle Links

Community Help
Find useful guides, FAQs, and documents to help you navigate and make the most of Esri Community.