nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

Especificaciones recomendadas para nueva estación de trabajo GIS

MichaelWoodward

<\/HEAD>

Actualmente tengo un Dell Optiplex 920 de 5 años con las siguientes especificaciones<\/P>

Intel4 Core217-4770<\/P>

16GB (4x4GB) 1600MHz DDR3 RAM<\/P>

GeForce GTX 1050 Ti<\/P>

Samsung 850 EVO 512 GB SSD Unidad de arranque<\/P>

Unidad de almacenamiento de 1TB 7200 rpm<\/P>

<\/P>

Me toca a mí obtener una nueva máquina este año y no estoy seguro si necesito construir un escritorio para juegos de gama alta, o conseguir una estación de trabajo real. Mantengo los mapas de agua, alcantarillado, drenaje y zonificación de nuestra Ciudad. Ahora mismo la máquina es bastante lenta usando ArcGIS Desktop 10.6. Al trabajar en ArcMap, experimento muchos congelamientos y mensajes de "No responde". También tengo varias imágenes aéreas de diferentes años en mi mapa, así como capas para agua, alcantarillado, drenaje, zonificación, etc. Las imágenes aéreas no están almacenadas en una máquina local, se accede a ellas a través del servidor NC OneMap. No estoy 100% seguro si las lentitudes son causadas por nuestra red o por mi hardware.<\/P>

<\/P>

¿Qué recomendarías como especificaciones para una nueva máquina? Puede que me vean obligado a elegir una máquina Dell por nuestro departamento "IT", pero podría intentar convencerlos si hay algo mejor.<\/P><\/BODY><\/HTML>

Encuentra más publicaciones etiquetadas con

Configuration & Integration

Operational Support

Workforce Development

Strategy & Planning

Architecture & Security

Geodata Engineering

Accepted answers

All comments

JoshuaBixby

Have you checked out ArcGIS Pro 2.2 system requirements—ArcGIS Pro | ArcGIS Desktop, Esri lists both supported and recommended.

JacobBoyleesri

Hey Michael,

I always recommend taking a look at the specs from the Esri Partner Network page for Dell.

I'm not advocating you purchase through Esri, but use the Specs as a starting point for discussions with IT: Dell

Let us know if you have further specific questions.

MichaelWoodward

I did see that. My current machine is rated as "recommended" or "optimal" according to their specs, but it is still slow. My municipality is new to GIS, so I don't have anyone to help me determine if my issues are hardware, software, or network related.

JoshuaBixby

Can you describe "slow?" ArcGIS Desktop does lots of things, saying it is "slow" is like telling a doctor you hurt and asking him what is wrong without providing any specific information.

MichaelWoodward

I wrote a brief description of my issue in the original post, 2nd paragraph. I can try to go into more detail this afternoon

MichaelWoodward

Thanks for that info. We already have the software, but it is nice to see what Dell and ESRI recommend.

Is the cheapest Precision 7920 (here: Precision 7920 Powerful Desktop Tower Workstation | Dell United States ) really better than a high end gaming desktop? The $2049 model doesn't even come with a SSD, and has similar processor, ram and graphics memory as my 5 year old PC. Unless there's something that makes a workstation inherently better than a regular desktop PC.

MalcolmMeyer2

Don't fall for the GPU hype, buy as much CPU as you can afford. The new i9 processors from Intel look promising. I NEVER go over 20% GPU usage (though I don't do 3D work either), meaning I could have gotten away with the P2000 and gotten either a 1TB NVMe, a faster processor, or 32GB RAM.

My 2018 workstation is an HP Z4 Workstation with a mid-level Xeon (W-2133 @ 3.6GHZ), 16GB of RAM, a Samsung 512 NVMe drive for the OS and working data, a large spinning disk for data backup, and an NVIDIA Quadro P4000. I think the total cost was around $4K. The fans are silent. If you need to keep costs down go with a gaming GPU, 16GB ram and an i7, i9 or Ryzen instead of a Xeon.

My computer flies in ArcMap with data stored locally. In ArcPro, random things are slow and overall it feels like beta software with daily crashes, though I still plod along and am slowly converting my workflow to ArcPro, hoping for better results in the future.

That said, looking over your post I would guess that the network is your main issue. You can use CrystalDiskMark to check the speeds of your network drives and compare these with your local drives. Pulling a raster over the network will be a disaster unless you have an amazing IT team that keeps the server in good shape and GB LAN.

John_RMellor__GISP

Sometimes when I'm running slow I will remove any file from my Table of Contents I'm not using. If that doesn't isolate the issue, I will remove the Aerial imagery. If that doesn't speed things up, I will compress the sde.

If I am still not responding I will remove the files I am using, one at a time, from Table of Contents, again trying to isolate if I have a slow connection. If I am still freezing up, I will start a new MXD. My final test is to move (export) all files that I'm working with to my C drive and start another new MXD. This would be the extent of tests I can try that are at my disposal.

I'm new to ArcGIS Pro, but now I am adding this to the steps to isolate (ArcGIS Pro is 64 bit which can make the difference). I'm interested in your response to Joshua as to the version of ArcMap you are using.

MichaelWoodward

I've never tried crystaldiskmark, but I can tell you our network is terrible. Our utility billing and financial software is on our server and it takes forever for that to come up. I can guarantee our network is not GB.

The aerials I use are not on our server at all. They're on the NC Onemap server, in Raleigh, I guess. I guess everytime the image refreshes, it's downloading it over the internet.

We do at least have a 100Mbps internet connection now, it was 25 a year ago

John_RMellor__GISP

If your network is slow, speeding up your workstation may not make a difference - unless you move all your data back and forth between your workstation and your server (sde) for every project. Would you regret the workstation purchase if you were not able to gain any processing speed because your network is slow?

MichaelWoodward

I certainly would regret convincing my department to spend $4000 if there was no improvement in performance.

EricCollinsOVV

Similar to the comments already provided, sometimes an MXD becomes corrupted. WHen encountering issues, sometimes I'll open a blank MXD and copy the layers of interest to it so that I only have what I need to do a process. Also, ensure that things like all your layers are all using the same map projection; if you're not, transformaitons on the fly are occurring and can significantly impact your work. Try running analyze map to see if there are any efficiencies that can be gained through indexing data, etc.

HoratioMcDowney

Hi Michael,

At the agency I work for we have invested in the recommended Precisions. Based on my experience with them they are much more stable for high end processing (especially in 3D) than the gaming machines. Disclosure: I use my machine for CAD, BIM and GIS and have effectively crashed my gaming machines (I have an old Alienware M17 and an MSI) with large models but have yet to crash my Precision at these specifications (although, the year is still young 🙂

Model: Dell Precision 7530 XCTO Type C SC Base S (my national team didn't like the size of the 7700 series, so they opted for these)

Processor: Intel Core Xeon E-2186M, Six Core Xeon 2.90 GHz, 4.80GHz Turbo, 12MB 45W

OS: Win 10 Pro

GPU: NVIDIA Quadro P3200 w/6GB GDDR5 (I, personally, found the Quadros more stable than the GTXs, but we, as an agency, found that we don't need a super high end versions of them [in accord with someone's comments below])

Memory: 128 GB, 4x32GB, DDR4-2400MHz SDRAM, 4 DIMMS, ECC

Hard Drive: 512 GB M.2 NVMe PCIe SSD Class 40 (We don't need a lot of space as we have servers and whatnot)

I don't think the rest of the specs are relevant. Again, I'm using the box for CAD, BIM and GIS so sometimes I'm running Revit and Pro or ArcMap and Autodesk Map or other combinations that are unnatural and unearthly but the box hasn't slowed me down yet. (I can report back later if you want.)

Hope this helps and all the best,

-H

explore-an-urban-model-card.png

MichaelWoodward

The GIS training people did mention it's good to do a "save as" of the MXD instead of a regular save every once in a while if I started to have problems.

I did run the "analyze map" tool, I got 91 warnings. They are either for "Layer's data source has a different projection" or "Layer's data source doesn't have a spatial index"

The ones that have a different projection, the data frame has this projection: "NAD_1983_StatePlane_North_Carolina_FIPS_3200_Feet" and the layer's data has this: "NAD_1983_2011_StatePlane_North_Carolina_FIPS_3200_Ft_US"

Are those the type of things that can cause problems?

EricCollinsOVV

Having more than one projection in a layer will slow down the rendering as Arc needs to transform everything to the layer's projection. If everything is the same projection, then Arc renders much faster.

Not having a spatial index on a feature class with lots of elements will also impact the draw rate. Not a big deal for a few hundred elements, but if you are drawing thousands or millions of elements, you're going to be gnashing your teeth waiting for it to draw.

MichaelWoodward

Is there an easy way to change the projection of a feature class? It didn't look like I could change it anywhere in the layer properties, or in ArcCatalog.

The ones that don't have a spatial reference at all are CAD files that I have added to the drawing. Some were created in-house using our AutoCad LT software, some where created by outside engineering firms.

NathanBruce1

Michael

Michael,

I was just browsing your post, its been a while so things may have improved already. One option to speed up your imagery could be to post it to ArcGIS Online and call on it from there to use locally. We ended up doing this for some of our power users to avoid network issues. Just a suggestion. Nathan

Únete a la Conversación

Los miembros registrados pueden publicar, seguir actualizaciones y más. ¿Nuevo aquí? Regístrate gratis.

Enlaces Rápidos

Community Help
Find useful guides, FAQs, and documents to help you navigate and make the most of Esri Community.