Captured electronic signature, will not print

Question

I have a survey123 connect form with a "Signature" field.   I have the XLSX spreadsheet listed in a repeat section.   I have the "type" as image,  Name: Signature,  Label; Signature,  Appearance as Signature.  In my docx template I have ${Signature}.   The signature does not print?   I do have  the bind::esri:field type listed as: esriFieldTypeString?  not sure if this will cause the problem?

I have tried several variations of the Signature syntax which does not pass the spars test when uploaded in survey123 report templates?  I have checked the feature layer and attachments are selected.

I have tried ${Signature_image},   ${Signature | Size:300:30}  I have not found any further documention on how to print the signature on the report.

TylerGraham2 · Answer

I've got good news and bad news.

The good news is that I got it to work fairly easily.

The bad news is the reason it didn't work is because the xlsx file has the bind::esri:fieldType column set to esriFieldTypeString for the signature image. It forces the field to be string even though you set it as an image for the question type, and you can't pull an image from a string field. It looks like you're using an existing service for the form, so you will need to check that feature service schema and see if the signature field is a string. I suspect it is, since when you create a form from an existing service it usually populates those. You will need to modify the feature service to include an attachment table for the signatures, which, if you're already collecting data in the feature service with other forms, will be inconvenient.

JanellaFlook · Answer

I'm not doing something correct,  In the report template I placed the above suggestion.   It did not work?

In the survey123 connect spreadsheet the repeat is named "inspection"  I have the following;

Begin Repeat                 Inspection                 Inspection Report

At the bottom of the form,  before closing the repeat I have

Image         Signature                    Signature        (appearance is Signature)

Date           Signature_Date_1       Signature Date

text              GlobalID                       Globalid

Image         Inspection_image         Image

End Repeat                                        Inspection

At the beginning of the report I open the repeat with ${#inspection}  At the end of my report template I have

Signature:    ${Signature}                                      Date: $Signature_Date_1}

${/}

What am I missing.

MDE Inspection Coded.docx

Form 5.xlsx

BARANGAY 1 (TEAM 3 AND 4) Processing Report.pdf

Barangay 1 (team 3) - part 2 Processing Report.pdf

TylerGraham2 · Answer

For your signature field named ${Signature} calling it in the template as ${Signature} or ${Signature | Size:300:30} should be valid.  However, since it is in a repeat you will need to open and close the repeat in the report template to access the signature image.

You would need to format it something like this:

${#Signature_Repeat} <-Needs to be the name of your repeat table make sure to include the #

${Signature} <-Calls the field named "Signature" from the repeat table

${/} <-Closes the repeat

https://doc.arcgis.com/en/survey123/browser/analyze-results/featurereport-repeats.htm