nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

Když je záznam aktualizován, spouštěč nefunguje

KevinDohner

Snažím se nastavit flow tak, aby když změním stav na survey123 z "Needs Updates" na "Completed", odeslal notifikační e-mail. Používám spouštěč "When record is updated in feature layer" pro ArcGIS Enterprise a mám ho nasměrovaný na feature layer pro survey123, ale při změně atributu se flow nikdy nespustí.<\/P>

Zkoušel jsem upravovat vrstvu v záložce "Data" v Survey123 i ve webové mapě, ale ve flow se nic neděje. Také jsem zkoušel změnit vrstvu, na kterou je spouštěč nasměrovaný, na zdrojovou hosted feature layer i na 2 views (1 pro formulář a 1 pro výsledky), a stále se nic neděje.<\/P>

Máme jiný flow nastavený pro "When a survey response is submitted" a ten funguje dobře s tímto survey.<\/P>

Také je třeba poznamenat, že vlastně nemohu rozchodit spouštěč "When record is updated in feature layer" pro žádnou vrstvu, na které jsem to zkoušel. Takže problém může být v tom, že nechápu, jak ten spouštěč používat.<\/P>

Najděte více příspěvků označených jako

Accepted answers

All comments

GIS_kiwi4

Also going to leave this here if it might help with some troubleshooting.

https://community.esri.com/t5/arcgis-connectors-for-power-automate-questions/guide-troubleshooting-arcgis-and-arcgis-enterprise/m-p/1634995#M1058

Akshay Harshe

@KevinDohner

If you are using `When a record is updated in the feature layer ` trigger then you will need to follow that with `Fetch updates, changes, deletions...` action. There can be several reasons for webhooks to not work. See if you have following:

To create webhooks you must

Own a feature layer
Has editing enabled
has editor tracking enable `Keep record of changes, updates ...`
If admin has disabled the webhooks they must be enabled.
and your user type should also have ability to use the webhooks.

Check all the pre-requisites here Create webhooks—Portal for ArcGIS | Documentation for ArcGIS Enterprise

Follow this guide to troubleshoot webhooks: Guide: Troubleshooting ArcGIS and ArcGIS Enterpris... - Esri Community

KevinDohner

I will definitely take a look at this. If I understand you correctly, I would still use the "When a survey is submitted" trigger, but since the webhook for that trigger is set to existing record edited, it will actually trigger the flow when something is edited?

GIS_kiwi4

You can use the "survey is submitted" connector but in the webhook settings (within survey123) you can just have the webhook trigger on "Existing record edited" and leave the "New record submitted" ticked off.

The flow will only trigger when a record is edited and not when it's submitted for the first time.

KevinDohner

A webhook is not being created when using that trigger. If I switch it to the "When a survey response is submitted" trigger, a webhook gets created, but I assume I wouldn't be able to fetch updates based on that trigger and if I remove that trigger the webhook will also get removed.

GIS_kiwi4

@KevinDohner - The first thing to check is to see if a webhook has been created.
If you set up the flow in PowerAUtomate, check the survey123 settings.

The webhook is critical for the triggers to work.
If the webhook does exist, it's worth checking within the webhook to see if trigger options are set up correctly.

Are you using AGOL or Enterprise?

Připojte se k diskusi

Přihlášení členové mohou přispívat, sledovat aktualizace a další. Jste tu noví? Zaregistrujte si bezplatný účet.

Přihlásit se
Registrovat

Rychlé odkazy

Community Help
Find useful guides, FAQs, and documents to help you navigate and make the most of Esri Community.