nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

zone aliases for locator widget results?

BenAller

We're using a local geocode service with municipal codes as the zones instead of zip codes. It would be helpful for our end-users to see the zone names (aka municipal names) in the results tab instead of the zone numbers. So for example, a locator result of "601 Westtown Rd, 52" would show up as "601 Westtown Rd, West Goshen Township". Is there a way to configure a list of aliases? Perhaps within the mxml?

Thanks,
Ben

Encontre mais publicações marcadas com

Accepted answers

RobertScheitlin__GISP

Ben,

I just tested the code with my locator and replaced my ", 36201" in the results with "West Goshen Township"

Original returned match:

1702 Noble St, Anniston, AL, 36201

modified result:

1702 Noble St, West Goshen Township

                            locateResult.title = addrCandidate.address ? replaceMuniCodes(String(addrCandidate.address)) : widgetTitle;                             function replaceMuniCodes(addStr:String):String                             {                                 var retVal:String = addStr;                                 var muniCodeArr:Array = addStr.split(", ");                                 if(muniCodeArr.length == 4){                                     retVal = muniCodeArr[0] + ", ";                                     switch(muniCodeArr[3])                                     {                                         case "36201":                                         {                                             retVal += "West Goshen Township";                                             break;                                         };                                         case "36203":                                         {                                             retVal += "East Goshen Township";                                             break;                                         };                                     }                                 }                                 return retVal;                             }

Try placing a break point in the replaceMuniCodes function and step through the code hovering you mouse over variable to see their values.

All comments

BenAller

Got it! Just had the wrong array item. Now reads: switch(muniCodeArr[1]). Robert, thanks a bunch. Really appreciate the help!

Ben

jcfranco

Anthony

It is just checking if addrCandidate.address is null or not

Adding to Robert's reply, since address is a String the condition will evaluate to false if it is null or an empty string and true otherwise (see AS3 Type Conversions).

RobertScheitlin__GISP

                            locateResult.title = addrCandidate.address ? replaceMuniCodes(String(addrCandidate.address)) : widgetTitle;                             function replaceMuniCodes(addStr:String):String                             {                                 var retVal:String = addStr;                                 var muniCodeArr:Array = addStr.split(", ");                                 if(muniCodeArr.length == 4){                                     retVal = muniCodeArr[0] + ", ";                                     switch(muniCodeArr[3])                                     {                                         case "36201":                                         {                                             retVal += "West Goshen Township";                                             break;                                         };                                         case "36203":                                         {                                             retVal += "East Goshen Township";                                             break;                                         };                                     }                                 }                                 return retVal;                             }

Try placing a break point in the replaceMuniCodes function and step through the code hovering you mouse over variable to see their values.

AntGiles

Thanks Robert

RobertScheitlin__GISP

Anthony

It is just checking if addrCandidate.address is null or not

AntGiles

Robert,

Sorry to jump in on this thread, but I would appreciate a little clarification on code syntax similar to what you have used in your example above:

locateResult.title = addrCandidate.address ? replaceMuniCodes(String(addrCandidate.address)) : widgetTitle;

I understand that the ? And : is shorthand for using an if else statement and locateResult.title will be set according to the statement being true or false, what I am unsure of is the addrCandidate.address as the condition, does this check if addrCandidate.address exists or if addrCandidate.address is empty.

Again sorry for hijacking the thread, i want to start writing neater code so a pointer would be appreciated

Regards

Anthony

BenAller

Here's the screenshot of the results page. I did modify the LocateWidge.xml to appear more like a single line geocode service by setting the visibility of the zone field to false. I also bumped down the minscore. I did try commenting out the zone field line in the xml below and re-ran, but it didn't seem to change anything.

<?xml version="1.0" ?>
<configuration label="World Geocoding">

<locator>http://dtarcgis10/arcgis/rest/services/Geocodeservices/Chesco_Address/GeocodeServer</locator>
<minscore>66</minscore>
<fields>
<field name="Zone" alias="Muni Code" visible="false"/>
</fields>
</configuration>

restFindAddressCandidatesResults.jpg

RobertScheitlin__GISP

Ben,

When you click find address candidates at the bottom of the rest service page and type in a valid address can you screenshot the result page for me?
Do you have anything in your LocateWidget.xml beside the <locator> tag? If so can you post your LocateWidget.xml?

BenAller

Robert,

1. Using Flex v3.2
2. The geocode service url is not public but attached is a screen shot. For what it's worth, it's a parcel locator that uses a relationship to our parcel address table.
3. Using Server 10.0

Thanks,
Ben

restURL.JPG

RobertScheitlin__GISP

Ben,

What version of the ArcGIS Viewer for Flex are you using?
What is the locator url that you have configured and is it public? If it is not public can you attach a screenshot of the rest service page for the locator
What is the version of ArcGIS Server you are using?

BenAller

Robert,

Thanks for the detailed response. I added the code you shared and I think I'm close but I'm hitting a snag somewhere. The locator still functions, though it's still displaying the municipal code. When I put a breakpoint at function replaceMuniCodes(addStr:String):String, the String returns something like "String = Object(@52b7a1)". Not sure if that's where the issue is, but I was thinking it would show something like "String = 601 Westtown Rd, 52". Also, when I step through, I get a "Source not found" related to the get address class (com.esri.ags.tasks.supportClasses::AddressCandidate/get address). Could that be the culprit? I'm somewhat new to working in this environment, so not really sure how to resolve. Any suggestions would be greatly appreciated.

Thanks again.
Ben

RobertScheitlin__GISP

Ben,

Sure in the LocateWidget.mxml find the createLocateResults function and add some logic to replace the ", 52" with the text you are looking for.

locateResult.title = addrCandidate.address ? replaceMuniCodes(String(addrCandidate.address)) : widgetTitle;
function replaceMuniCodes(addStr:String):String
                            {
                                var retVal:String = addStr;
                                var muniCodeArr:Array = addStr.split(", ");
                                if(muniCodeArr.length == 2){
                                    retVal = muniCodeArr[0] + ", ";
                                    switch(muniCodeArr[0])
                                    {
                                        case "52":
                                        {
                                            retVal += "West Goshen Township";
                                            break;
                                        };
                                        case "53":
                                        {
                                            retVal += "East Goshen Township";
                                            break;
                                        };
                                    }
                                }
                                return retVal;
                            }

Participe da Conversa

Membros conectados podem postar, seguir atualizações e mais. Novo aqui? Registre uma conta gratuita.

Links Rápidos

Community Help
Find useful guides, FAQs, and documents to help you navigate and make the most of Esri Community.