I have a virtual directory set up to where my plats are. They are in .tif format but I do have one in .pdf format to use to test this widget. Use the identify tool to identify features on the map: Identify Clear Loading... Features Identified: Lot PLATLINK Not sure why this isn't working. I modified the identifywidget.xml, do I need to modify anything else to get this to work? Might be easier to just explain what to do and I will do it per the instructions and see if I missed anything.

nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

Identify widget wont show hyperlink

ShawnKraft1

I have a virtual directory set up to where my plats are. They are in .tif format but I do have one in .pdf format to use to test this widget.

                                <descriptionlabel>Use the identify tool to identify features on the map:</descriptionlabel>
<pointlabel>Identify</pointlabel>
<clearlabel>Clear</clearlabel>
<loadinglabel>Loading...</loadinglabel>
<selectionlabel>Features Identified:</selectionlabel>
</labels>
<layers>
<layer>
   <name>Lot</name>
   <linkfield>PLATLINK</linkfield>
</layer>
<layer>
   <name></name>
   <linkfield></linkfield>
</layer>
</layers>
</configuration>

Not sure why this isn't working. I modified the identifywidget.xml, do I need to modify anything else to get this to work? Might be easier to just explain what to do and I will do it per the instructions and see if I missed anything.

Encontre mais publicações marcadas com

Accepted answers

All comments

RobertScheitlin__GISP

All,

A new version of the identify widget is now available.

* 2.2.3 - Identify by point/line/extent/polygon are all now supported
- Info window will appear at the center of identified geometry now if returngeometryforzoom is set to true in xml file.
if returngeometryforzoom is true, when you mouse over a record the geometry for that particular record is drawn using the symbology defined in the xml
- The symbology used by the draw tools is now user defined in the xml
- Fixed an issues with link icon if prefix or suffix is supplied and a empty field.

PeterFerretti

Yes I can send it to you.

Shawn,
It seems the zip file you posted is corrupt (Identify Tool v1.3). Could you please repost? Thanks in advance.

RuthCostley

I have the same problem as stated above where the identify tool in the flexviewer folder returns Identify operation not supported on this service. What were the steps to fixing the problem?

ShawnKraft1

Here they are.

widgets.zip

topo6.jpg

ShawnKraft1

Yes I can send it to you.

NatashaManzuiga

LOL. Widget works great. Thanks Robert

Shawn, can u send here your identifywidget.mxml and identifywidget.xml?
I have the same problem :S
Naty

ShawnKraft1

LOL. Widget works great. Thanks Robert

RobertScheitlin__GISP

Shawn,

Good to hear it I was running out of suggestions...

ShawnKraft1

Actually it was the myIdentify v1.3 that worked.

ShawnKraft1

Okay I am a bonehead. I used your myIdentify_v1.2.02. It worked. All I had to do thru my iterations was remove and re-add the IdentifyWidget to the modules each time I did an iteration to test it.

ShawnKraft1

So when is ESRI gonna hire you for helping all the people you have helped lol.

ShawnKraft1

I am starting to think I should have replaced the IdentifyWidget.xml and mxml in the esa folder as well.

ShawnKraft1

Its probably important to note that I did not try to create a separate Identify tool to use in addition to the standard Identfiy tool that comes with the sample viewer. What I did was just replace the IdentifyWidget.xml and mxml in the flexviewer folder. Which, I thought would basically alter the standard Identify tool in the sample viewer.

ShawnKraft1

How about this, how would I go about installing the myIdentify_v1.2.02.zip version you created?

ShawnKraft1

-->
<configuration>
<securedlayer>http://cigtdc.esri.com</securedlayer>
<securedproxy>http://sabags/FlexProxy/proxy.ashx</securedproxy>
</configuration>

this is the gist of the IdentifyWidget.xml in the esa folder.

this is the IdentifyWidget.xml in the flexviewer folder

<configuration>
<identifylayeroption>visible</identifylayeroption>
<identifytolerance>5</identifytolerance>
<zoomscale>5000</zoomscale>
<labels>
<identifylabel>Identify</identifylabel>
<resultslabel>Results</resultslabel>
<descriptionlabel>Use the identify tool to identify features on the map:</descriptionlabel>
<pointlabel>Identify</pointlabel>
<clearlabel>Clear</clearlabel>
<loadinglabel>Loading...</loadinglabel>
<selectionlabel>Features Identified:</selectionlabel>
</labels>
<layers>
<layer>
   <name>Lot</name>
   <linkfield>PLATLINK</linkfield>
</layer>
<layer>
   <name>Layer2</name>
   <linkfield>URL</linkfield>
</layer>
</layers>
</configuration>

ShawnKraft1

What is interesting is if I have it in the config file to point at the IdentifyWidget in the esa folder, the tool will function properly, albeit it doesn't show the hyperlink that I am trying to accomplish. If I change it in the config to point to the IdentifyWidget in the flexviewer folder, the tool functions properly, it just give me that comment that says the tool does not support that service.

ShawnKraft1

Yep. I have an mxd set up with several layers in it. The mxd is running as a service called Streetstuff. Its my test as i am building in flex. Lot is the exact name of the layer in the mxd, and PLATLINK is the field alias with the http urls.

ShawnKraft1

Well I have the myIdentify_v1.2.02 that you created. I am gonna try that.

RobertScheitlin__GISP

Shawn,

Is "Lot" the exact name of the layer in a map service as it is listed in your REST service directory?

ShawnKraft1

Should I set up that virtual directory as a service in arcgis server manager?

ShawnKraft1

Yeah. I have something wrong somewhere. Implementing this tool should be easy. All I should have to do is replace the IdentifyWidget.xml/mxml files right? I changed the config to point to flexviewer folder instead of the esa folder but that just gives me a "identify operation not supported on this service" in the identify box.

RobertScheitlin__GISP

Shawn,

So you getting the same result?

ShawnKraft1

oh wait, that is supposed to be what it says. think i am just looking for anything at this point. lol

ShawnKraft1

<widget label="Identify" icon="com/esri/solutions/flexviewer/assets/images/icons/i_info.png" menu="menuWidgets" config="com/esri/solutions/flexviewer/widgets/IdentifyWidget.xml">com/esri/solutions/flexviewer/widgets/IdentifyWidget.swf</widget>

Okay, in config.xml I have it pointing to menuWidgets and it should not be pointing there. So I will change it.

RobertScheitlin__GISP

Shawn,

Try [HTML]<identifylayeroption>visible</identifylayeroption>[/HTML]

ShawnKraft1

When I built the virtual directory, I didn't set it to run scripts and executables. So I checked that on too and will try it again.

ShawnKraft1

It said, "Identify operations not supported on this service" when I click on a lot now. It does that when I change the config.xml to point to the flexviewer folder instead of the esa for the IdentifyWidget.swf file.

ShawnKraft1

Okay, yeah I was wondering about the config file pointing to the esa folder. Okay will change my slashes back.

RobertScheitlin__GISP

Shawn,

Sorry, I completely typed my slashes the wrong direction. As far as the esa one... Which one are you pointing to in your config.xml? If you are pointing to the esa one in the config.xml change it to point to the one in the flexviewer folder instead.

ShawnKraft1

I have spaces in my file names and I hope that isn't causing a problem. Like I will have Hodgemans 1870.jpg

Participe da Conversa

Membros conectados podem postar, seguir atualizações e mais. Novo aqui? Registre uma conta gratuita.

Links Rápidos

Community Help
Find useful guides, FAQs, and documents to help you navigate and make the most of Esri Community.