nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

New password for Arc Hydro ftp site - October 1st 2013

ChristineDartiguenave

New password for Arc Hydro ftp site
Note that the password has changed as of 10/1/2013 (will be reset every 6 months). The new password is:
ADSRiver.2013b

Christine Dartiguenave
Esri Water Resources Team

******************

https://mft.esri.com

Login: ADSRiverHydraulics
Password: ADSRiver.2013b

To access, select a FTP client:

1. Web Client
Site link: https://mft.esri.com
(Video tutorials available on the main page, prior to log in)

2. Third party SFTP client
** Download a preconfigured client
https://mft.esri.com/EFTClient/Account/mft.zip **

3. FTP address to configure a third party SFTP client of your choice:
Site address: mft.esri.com
Port: 22

Encontre mais publicações marcadas com

Arc Hydro

Accepted answers

All comments

JasonUlrich

Hello --

It appears the username/password is not working. Please advise. Thanks!

UN: ADSRiverHydraulics
PW: ADSRiver.2013b

Jason Ulrich

MarkBoucher

It just worked for me.

JasonUlrich

Mark -- thanks. I did get the SFTP client to work; never got the browser (IE or chrome) to work for some reason.

Jason

It just worked for me.

RoxanaRodriguez

I do not know why I cannot open the site. I can't log In, please help me.

Roxana

V_StuartFoote

Roxana,

I do not know why I cannot open the site. I can't log In, please help me.

You can NOT use a web browser to connect to a SSH encrypted sftp site. You must use a secure ftp client.

I prefer Filezilla ( https://filezilla-project.org/download.php ), but there are others. Or Esri provides Martin Prikryl's Prinki WinSCP client ( http://winscp.net/eng/index.php ) "preconfigured" to use with the Water Resources site.

Give one of those a try--not your web browser--and let us know how you make out.

Stuart

TrevorHume

Hi All. Tried to login using filezilla and WinSCP with the user and pass in this thread and it does not work for me. I get this from filezilla (similar message in WinSCP):

Status: Connecting to mft.esri.com...
Response: fzSftp started
Command: open "ADSRiverHydraulics@mft.esri.com" 22
Command: Pass: **************
Error: Disconnected: No supported authentication methods available (server sent: )
Error: Could not connect to server

Any thoughts...?

Thanks,
Trevor

V_StuartFoote

Trevor,

Have another go and double check password entered.

I just ran a session from scratch using name and password as listed (rather than from Site Manager) and connected without issue:

Status: Connecting to mft.esri.com...
Response: fzSftp started
Command: open "ADSRiverHydraulics@mft.esri.com" 22
Command: Pass: **************
Status: Connected to mft.esri.com
Status: Retrieving directory listing...
Command: pwd

[ATTACH=CONFIG]28130[/ATTACH]

Stuart

ArcHydro_Login_sftp.PNG

TrevorHume

Thanks Stuart.

I just tried to get in now, and was successful. I used my site manager settings, and made no changes and it works fine! Server issue? Very strange.

In any event, thanks again,
Trevor

RoxanaRodriguez

Thanks it works perfectly 🙂

Avrikadmon

Hi
I used the usernsme and the password ADSRiverHydraulics ADSRiver.2013b, but it doesn't open.
Is the password replaced ?
Thanks for help
Avri

AdrianneBlack

I can't seem to log on today either. This is the message I get from FileZilla:
[INDENT]Status: Connecting to mft.esri.com...
Response: fzSftp started
Command: open "ADSRiverHydraulics@mft.esri.com" 22
Command: Pass: *************
Error: Authentication failed.
Error: Critical error
Error: Could not connect to server[/INDENT]
This is the message I get through MFTAccount/WinSCP:
[INDENT]Disconnected: No supported authentication methods available (server sent: )
Authentication log (see session log for details):
Using username "ADSRiverHydraulics".
Access denied.

Authentication failed.[/INDENT]

V_StuartFoote

Please have another go, accessed minutes ago without issue with credentials as listed in OP.

Stuart

Avrikadmon

Hi Stuart
I did as you said.
Looks very nice both Hydro Tools and GeoHMS.
Thanks
Avri

RichardStevens1

I have been trying for two days to connect with multiple clients with no luck. As far as I can tell my settings are correct. I repeatedly get this error:

Status: Connecting to mft.esri.com...
Response: fzSftp started
Command: open "ADSRiverHydraulics@mft.esri.com" 22
Error: Server unexpectedly closed network connection
Error: Could not connect to server

I'm currently trying with Firezilla and am using these settings:

Host: mft.esri.com
Port: 22
Protocol: SFTP
User: ADSRiverHydraulics
Pass: ADSRiver.2013b

I'm in desperate need of this new version. Any suggestions or another source for the MSI. I'd be willing to pay someone to email it to me at this point. Laugh!

RichardStevens1

I have up and spoke to one of our IT guys and he connected and downloaded it without issue. Laugh.

zachswander

Alright, so I am having a similar yet different problem, which I posted on the v 2.0 release blog. Every time I try to connect using FileZilla, it is replying that the "connection refused" and "could not connect to server". I have tried using the settings manager and the quick connect lines, but no luck. Is there some sort of maintenance going on?

MarkBoucher

Every time I try to connect using FileZilla, it is replying that the "connection refused" and "could not connect to server". I have tried using the settings manager and the quick connect lines, but no luck.

I tried it and had the same error, but then took out the "http://" part of "https://mft.esri.com" and FileZilla worked fine. FileZilla did add the "sftp://" text in front of mtf.esri.com. I also put in Port 22, but FileZilla erased that even though it used it.

[ATTACH=CONFIG]30831[/ATTACH]

FileZilla.jpg

Janezg

I am looking version for ArcGIS 9.3

ftp folder /incoming/arcHydro/Setup9.3_9.3.1/1.4.0.258 is unfortunately empty.

ChristineDartiguenave

The setup should be there now.

Christine

SumitJain

Heres the error message in filezilla.. i am entering the new password ADSRiver.2013b... can somebody help

Status: Connecting to mft.esri.com...
Response: fzSftp started
Command: open "ADSRiverHydraulics@mft.esri.com" 22
Command: Pass: **************
Error: Disconnected: No supported authentication methods available (server sent: )
Error: Could not connect to server
Status: Connecting to mft.esri.com...
Response: fzSftp started
Command: open "ADSRiverHydraulics@mft.esri.com" 22
Command: Pass: **************
Error: Disconnected: No supported authentication methods available (server sent: )
Error: Could not connect to server
Status: Waiting to retry...
Status: Connecting to mft.esri.com...
Response: fzSftp started
Command: open "ADSRiverHydraulics@mft.esri.com" 22
Command: Pass: **************
Error: Disconnected: No supported authentication methods available (server sent: )
Error: Could not connect to server

V_StuartFoote

No change, just verified the posted remains viable. Try it again.

Stuart

liulang7106liulang7106

I tried it and had the same error, but then took out the "http://" part of "https://mft.esri.com" and FileZilla worked fine. FileZilla did add the "sftp://" text in front of mtf.esri.com. I also put in Port 22, but FileZilla erased that even though it used it.

[ATTACH=CONFIG]30831[/ATTACH]

same question as me, Can anybody post the install-file link to me? Thanks in advance

VikramSinha

Hi,

I am getting a 'authentication failed' error for last 3 days or so.

**
Status: Connecting to mft.esri.com...
Response: fzSftp started
Command: open "ADSRiverHydraulics@mft.esri.com" 22
Command: Pass: **************
Error: Authentication failed.
Error: Critical error
Error: Could not connect to server
**

Is there a new password, or am I missing something while trying to connect? These parameters worked just fine for me last week.

Thanks.
-
Sinha

MarkBoucher

I just tried with Filezilla and got in:
Echo from FileZilla

Status:    Connecting to mft.esri.com...
Response:    fzSftp started
Command:    open "ADSRiverHydraulics@mft.esri.com" 22
Command:    Pass: *************
Status:    Connected to mft.esri.com
Status:    Retrieving directory listing...
Command:    cd "/incoming/arcHydro"
Response:    New directory is: "/incoming/arcHydro"
Command:    ls
Status:    Listing directory /incoming/arcHydro
Status:    Calculating timezone offset of server...
Command:    mtime "Data"
Response:    1391610761
Status:    Timezone offsets: Server: -25200 seconds. Local: -25200 seconds. Difference: 0 seconds.
Status:    Directory listing successful

The basic protocols I use are posted here http://forums.arcgis.com/threads/48100-ArcHydro-Problem-Solvers?p=372960&viewfull=1#post372960

Make sure the protocol type is SFTP - SSH File Transfer Protocol. This is an option in FileZilla "File>Site Manager..." dialogue window. Messed me once.

BenjaminMittler

When i put in the password it is telling me that further authentication is required. Did the password change or am i just doing something wrong?

MarkBoucher

See http://forums.arcgis.com/threads/104391-New-password-for-Arc-Hydro-ftp-site-March-11-2014?p=376913&viewfull=1#post376913

Participe da Conversa

Membros conectados podem postar, seguir atualizações e mais. Novo aqui? Registre uma conta gratuita.

Links Rápidos

Community Help
Find useful guides, FAQs, and documents to help you navigate and make the most of Esri Community.