How to add a street shape file to cityengine?

Question

Hi again guys.

So i'm been buying working in my 3d city but now i'm stuck again.

Buildings shapes and height,  tree and vegetation shapes already working and ortophotomap everything ok.

So the problema is when i try do add the street shape (see the attach n1 - blue lines) the CE thinks that i'm adding multiple roads (see the attach n2) since i dont have a center line but only the road perimeter.

So what can i do to tell CE that the road is inside the lines not on the top of the lines?

Already tried to found any info regarding this in the FAQ's and in the Help file and didnt found anything.

Attach n3 is the street shape file info in arcgis.

Thanks once again

Best regards

JM

3.jpg

1.jpg

2.jpg

RaajRaaj_1-1779829571203.png

AmyRoustCoL_0-1779826613896.png

2026-Q2-events-1200x1200.jpg

Joao_PedroMarques · Answer

LR thanks for that ''little'' tip maybe be useful later for another shape for now i downloaded the shape from OSM and already readjusted to my ortophotomap. Its perfect!

Gonna try to reuse the old shape file (streets) for the sidewalk at least.

Thank you guys for the tips and the quick replies.

JM

LR · Answer

If you have ArcMap ArcGIS for Desktop 
, you could try this*, however I only had decent success with very simple stuff, and even that required manual cleanup. You could also buffer the lines by 0.5*street width, then convert the buffers to lines, then cut the lines.. or get the streets elsewhere like Micah Taylor suggested..

* Collapse Dual Lines To Centerline—Help | ArcGIS for Desktop

MicahTaylor · Answer

Your welcome.

Yes, if you want to use a single segment as a sidewalk....you could make one sidewalk width = 0, the street width = 0, and the other sidewalk = *however wide*...But again, I think your best option is to clean up the data before importing to CityEngine.

The streets only 'perfectly' match the buildings if the buildings were created from the blocks in the street network, but it is pretty easy to line the street shapes up along the buildings once you have them generated.  Just play with SidewalkWidthLeft, SidewalkWidthRight, and StreetWidth in the inspector window.

Good luck.