nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

Os dados de Serviço LV e os dados de conectividade Set Edge não são rastreados

RomuldKiobya

Eu tive um problema quando rastreei os dados, alguns dos Serviços de Baixa Tensão receberam a cor de rastreamento totalmente delineada. Mas alguns rastreamentos não alcançam o serviço de Baixa Tensão. Eu capturei da aplicação Field Map, e quando processei os dados no ArcGIS Pro, enfrentei esse desafio. Mas quando modifiquei, separei o ponto e a linha, e conectando novamente, ele recebeu a cor de rastreamento completa, por quê?

Após selecionar a ferramenta set edge connectivity para permitir condutores de Baixa Tensão, e rastrear, nenhuma cor de rastreamento delineada aparece, por quê?

Anexei o documento abaixo para assistência

Encontre mais publicações marcadas com

Accepted answers

JohnAlsup

The Utility Network is 3D capable which means the coordinates in all three planes must match in order for two or more objects to connect. If the if the X and Y coordinates are the same, but the Z is not, then they are not the same point and will not connect.

All comments

JohnAlsup

Without having the actual data, I would guess that this may be a snapping issue. If the data was created using some automated migration tool, it may be that the line end point is not within the tolerance. By editing it and snapping the line, you then get correct connectivity, which is what I think you experienced.

BrianBerube_GIS

In addition to John's point above regarding snapping tolerances, I did notice that there were "pending edits" not saved in the screenshot provided. It's always important to save any edits made as well prior to initiating a trace for your network.

https://pro.arcgis.com/en/pro-app/latest/help/editing/edit-a-utility-network.htm

RomuldKiobya

We have used Geodatabase topology and Spatial filter transformer at the workbench to check if there is a gap between the LV service and the LV conductor.No gap but when tracing signal can't reach to LVservice.

But after disabling the Z value in the Electric Device feature class/making zero, the connected trace reaches LV service.

My question is what is the impact of Z coordinate value?

JohnAlsup

RomuldKiobya

Ask if there is no negative impact if I operate my Electric Utility Network in Disable Z or Z=0. While during Creation of Utility Network demand XYZ and M

Participe da Conversa

Membros conectados podem postar, seguir atualizações e mais. Novo aqui? Registre uma conta gratuita.

Links Rápidos

Community Help
Find useful guides, FAQs, and documents to help you navigate and make the most of Esri Community.