nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

CityEngine 2012 Trial on Linux RHEL 6.4 - Authorization Software Error

DerekAdams

I'm trying to authorize my trial of CityEngine 2012 which I downloaded via the sticky post here in the forums. I specifically got the Linux version and I'm attempting to run it on RHEL 6.4 (Santiago). The installation seems to proceed fine until I get to the point where I have to specify the license information.

I run the following command from the installation directory: ./bin/ArcGISAdmin

That brings up a screen with a tree structure. I select the CityEngine option, then click the button "Authorize Now..."

A new window appears titled "Software Authorization Wizard". I select the following options:

1. "I have installed my software..."
2. "Authorize with ESRI now using the internet."
3. I fill in all my personal information
4. On the next screen, I fill in my industry/job etc.

Then... When I click "Next >" on this job information screen, the wizard program just quits and gives me the main screen of ArcGISAdmin again. I get no prompt asking for an authorization code, etc.

Does anyone have any help on this?

P.S. I was curious about why it was just quitting, so I ran a debugger on it and receive the following message:

Program received signal SIGSEGV, Segmentation fault.
0x0000000000883089 in pFlxActHandleResetError ()

Thanks,

-Derek

Vind meer berichten getagd met

Accepted answers

DerekAdams

I figured out my problem. It turns out that the licensing service (install_fnp.sh) wasn't properly executed. We walked through the install and did the installation properly and once we did, I was able to get to the next screen.

Thanks for your help!

-Derek

All comments

DerekAdams

Here is also the 'ldd' output to ensure I'm using the correct Qt libraries:

 linux-vdso.so.1 =>  (0x00007ffff7da6000)
 libQtGui.so.4 => /home/dpadams/Esri_CityEngine_2012/bin/libQtGui.so.4 (0x00007f177ac18000)
 libQtNetwork.so.4 => /home/dpadams/Esri_CityEngine_2012/bin/libQtNetwork.so.4 (0x00007f177a8d1000)
 libQtCore.so.4 => /home/dpadams/Esri_CityEngine_2012/bin/libQtCore.so.4 (0x00007f177a411000)
 libpthread.so.0 => /lib64/libpthread.so.0 (0x00000038a7000000)
 libstdc++.so.6 => /usr/lib64/libstdc++.so.6 (0x00000038ad400000)
 libm.so.6 => /lib64/libm.so.6 (0x00000038a6c00000)
 libgcc_s.so.1 => /lib64/libgcc_s.so.1 (0x00000038acc00000)
 libc.so.6 => /lib64/libc.so.6 (0x00000038a6400000)
 libdl.so.2 => /lib64/libdl.so.2 (0x00000038a6800000)
 libgthread-2.0.so.0 => /lib64/libgthread-2.0.so.0 (0x0000003605a00000)
 libglib-2.0.so.0 => /lib64/libglib-2.0.so.0 (0x0000003605e00000)
 libpng12.so.0 => /usr/lib64/libpng12.so.0 (0x00000038ab000000)
 libz.so.1 => /lib64/libz.so.1 (0x00000038a7400000)
 libfreetype.so.6 => /usr/lib64/libfreetype.so.6 (0x00000038aa400000)
 libgobject-2.0.so.0 => /lib64/libgobject-2.0.so.0 (0x0000003611600000)
 libSM.so.6 => /usr/lib64/libSM.so.6 (0x00000038b0400000)
 libICE.so.6 => /usr/lib64/libICE.so.6 (0x00000038b0000000)
 libXrender.so.1 => /usr/lib64/libXrender.so.1 (0x00000038ab400000)
 libfontconfig.so.1 => /usr/lib64/libfontconfig.so.1 (0x00000038aac00000)
 libXext.so.6 => /usr/lib64/libXext.so.6 (0x00000038a9c00000)
 libX11.so.6 => /usr/lib64/libX11.so.6 (0x00000038a8c00000)
 librt.so.1 => /lib64/librt.so.1 (0x00000038a7800000)
 /lib64/ld-linux-x86-64.so.2 (0x00000038a6000000)
 libuuid.so.1 => /lib64/libuuid.so.1 (0x00000038ae000000)
 libexpat.so.1 => /lib64/libexpat.so.1 (0x00000038aa000000)
 libxcb.so.1 => /usr/lib64/libxcb.so.1 (0x00000038a9000000)
 libXau.so.6 => /usr/lib64/libXau.so.6 (0x00000038a9400000)

DerekAdams

Hi !

Can you provide the full stack trace at the time of the crash ?

Let me know ..

matt

Program received signal SIGSEGV, Segmentation fault.
0x0000000000883089 in pFlxActHandleResetError ()
(gdb) bt
#0  0x0000000000883089 in pFlxActHandleResetError ()
#1  0x000000000087d683 in flxActCommonLicSpcGetNumberProducts ()
#2  0x0000000000458e9c in CDirectConnect::IsActivated(QString) ()
#3  0x00000000004ef1f7 in CRegistrationNumber::initializePage() ()
#4  0x00007f3b9a005fed in ?? ()
   from /home/dpadams/Esri_CityEngine_2012/bin/libQtGui.so.4
#5  0x00007f3b9a00625f in QWizard::next() ()
   from /home/dpadams/Esri_CityEngine_2012/bin/libQtGui.so.4
#6  0x00007f3b9a00704e in QWizard::qt_metacall(QMetaObject::Call, int, void**)
    () from /home/dpadams/Esri_CityEngine_2012/bin/libQtGui.so.4
#7  0x00000000006d93dd in CMainDlg::qt_metacall(QMetaObject::Call, int, void**)
    ()
#8  0x00007f3b99258d09 in QMetaObject::activate(QObject*, QMetaObject const*, int, void**) () from /home/dpadams/Esri_CityEngine_2012/bin/libQtCore.so.4
#9  0x00007f3b9a19b562 in QAbstractButton::clicked(bool) ()
   from /home/dpadams/Esri_CityEngine_2012/bin/libQtGui.so.4
#10 0x00007f3b99ea5cbb in ?? ()
   from /home/dpadams/Esri_CityEngine_2012/bin/libQtGui.so.4
#11 0x00007f3b99ea7625 in ?? ()
   from /home/dpadams/Esri_CityEngine_2012/bin/libQtGui.so.4
#12 0x00007f3b99ea787b in QAbstractButton::mouseReleaseEvent(QMouseEvent*) ()
   from /home/dpadams/Esri_CityEngine_2012/bin/libQtGui.so.4
#13 0x00007f3b99b19531 in QWidget::event(QEvent*) ()
---Type <return> to continue, or q <return> to quit---
   from /home/dpadams/Esri_CityEngine_2012/bin/libQtGui.so.4
#14 0x00007f3b99ea646f in QAbstractButton::event(QEvent*) ()
   from /home/dpadams/Esri_CityEngine_2012/bin/libQtGui.so.4
#15 0x00007f3b99f448fe in QPushButton::event(QEvent*) ()
   from /home/dpadams/Esri_CityEngine_2012/bin/libQtGui.so.4
#16 0x00007f3b99abd84f in QApplicationPrivate::notify_helper(QObject*, QEvent*)
    () from /home/dpadams/Esri_CityEngine_2012/bin/libQtGui.so.4
#17 0x00007f3b99ac4fd7 in QApplication::notify(QObject*, QEvent*) ()
   from /home/dpadams/Esri_CityEngine_2012/bin/libQtGui.so.4
#18 0x00007f3b99242b54 in QCoreApplication::notifyInternal(QObject*, QEvent*)
    () from /home/dpadams/Esri_CityEngine_2012/bin/libQtCore.so.4
#19 0x00007f3b99ac0ad6 in QApplicationPrivate::sendMouseEvent(QWidget*, QMouseEvent*, QWidget*, QWidget*, QWidget**, QPointer<QWidget>&, bool) ()
   from /home/dpadams/Esri_CityEngine_2012/bin/libQtGui.so.4
#20 0x00007f3b99b44bc9 in ?? ()
   from /home/dpadams/Esri_CityEngine_2012/bin/libQtGui.so.4
#21 0x00007f3b99b438e3 in QApplication::x11ProcessEvent(_XEvent*) ()
   from /home/dpadams/Esri_CityEngine_2012/bin/libQtGui.so.4
#22 0x00007f3b99b6e2f2 in ?? ()
   from /home/dpadams/Esri_CityEngine_2012/bin/libQtGui.so.4
#23 0x0000003605e38f0e in g_main_context_dispatch ()
   from /lib64/libglib-2.0.so.0
#24 0x0000003605e3c938 in ?? () from /lib64/libglib-2.0.so.0
---Type <return> to continue, or q <return> to quit---
#25 0x0000003605e3ca3a in g_main_context_iteration ()
   from /lib64/libglib-2.0.so.0
#26 0x00007f3b9926fb35 in QEventDispatcherGlib::processEvents(QFlags<QEventLoop::ProcessEventsFlag>) ()
   from /home/dpadams/Esri_CityEngine_2012/bin/libQtCore.so.4
#27 0x00007f3b99b6de3f in ?? ()
   from /home/dpadams/Esri_CityEngine_2012/bin/libQtGui.so.4
#28 0x00007f3b99241ef5 in QEventLoop::processEvents(QFlags<QEventLoop::ProcessEventsFlag>) () from /home/dpadams/Esri_CityEngine_2012/bin/libQtCore.so.4
#29 0x00007f3b9924215d in QEventLoop::exec(QFlags<QEventLoop::ProcessEventsFlag>) () from /home/dpadams/Esri_CityEngine_2012/bin/libQtCore.so.4
#30 0x00007f3b99243f04 in QCoreApplication::exec() ()
   from /home/dpadams/Esri_CityEngine_2012/bin/libQtCore.so.4
#31 0x0000000000420f1d in main ()
(gdb)

MatthiasBuehler1

Hi !

Can you provide the full stack trace at the time of the crash ?

Let me know ..

matt

MatthiasBuehler1

Hey Derek,

waiting on some feedback..

matt

DerekAdams

Hi Derek,

Sorry for the inconvenience ..

Can you please write to support@esri.com ?

Thanks & good luck !

I have but I don't get connected with the right people. Do you have a software engineering team I can speak with? This is a software error and I need to speak with someone who actually writes the ArcGISAdmin program. I believe it's a bug in their code.

-Derek

MatthiasBuehler1

Hi Derek,

Sorry for the inconvenience ..

Can you please write to support@esri.com ?

Thanks & good luck !

Doe mee aan het gesprek

Aangemelde leden kunnen berichten plaatsen, updates volgen en meer. Nieuw hier? Registreer een gratis account.

Snelle Links

Community Help
Find useful guides, FAQs, and documents to help you navigate and make the most of Esri Community.